1. 7.3 VOLUMES

2. Solids with Known Cross Sections If A(x) is the area of a cross section of a solid and A(x) is continuous on [a, b], then the volume of the solid from x = a to x = b is

3. Known Cross Sections Ex: The base of a solid is the region enclosed by the ellipse The cross sections are perpendicular to the x-axis and are isosceles right triangles whose hypotenuses are on the ellipse. Find the volume of the solid. 5 -5 2 -2 a a

4. 5 -5 2 -2 a a 1.) Find the area of the cross section A(x). y 2.) Set up & evaluate the integral.

5. Unknown Cross Sections: DISC METHOD 1 Find a formula for A ( x ). Sketch the solid and a typical cross section. 2 3 Find the limits of integration. 4 Integrate A ( x ) to find volume.

6. x y A 45 o wedge is cut from a cylinder of radius 3 as shown. Find the volume of the wedge. You could slice this wedge shape several ways, but the simplest cross section is a rectangle. If we let h equal the height of the slice then the volume of the slice is: Since the wedge is cut at a 45 o angle: x h 45 o Since

7. x y Even though we started with a cylinder,  does not enter the calculation!

8. Cavalieri’s Theorem: Two solids with equal altitudes and identical parallel cross sections have the same volume. Identical Cross Sections

9. Suppose I start with this curve. My boss at the ACME Rocket Company has assigned me to build a nose cone in this shape. So I put a piece of wood in a lathe and turn it to a shape to match the curve.

10. How could we find the volume of the cone? One way would be to cut it into a series of thin slices (flat cylinders) and add their volumes. The volume of each flat cylinder (disk) is: In this case: r= the y value of the function thickness = a small change in x = dx

11. The volume of each flat cylinder (disk) is: If we add the volumes, we get:

12. This application of the method of slicing is called the disk method. The shape of the slice is a disk, so we use the formula for the area of a circle to find the volume of the disk. If the shape is rotated about the x-axis, then the formula is: A shape rotated about the y-axis would be: Math Demo

13. The region between the curve, and the y -axis is revolved about the y -axis. Find the volume. y x We use a horizontal disk. The thickness is dy. The radius is the x value of the function. volume of disk

14. The natural draft cooling tower shown at left is about 500 feet high and its shape can be approximated by the graph of this equation revolved about the y-axis: The volume can be calculated using the disk method with a horizontal disk.

15. The region bounded by and is revolved about the y-axis. Find the volume. The “disk” now has a hole in it, making it a “washer”. If we use a horizontal slice: The volume of the washer is: outer radius inner radius

16. This application of the method of slicing is called the washer method. The shape of the slice is a circle with a hole in it, so we subtract the area of the inner circle from the area of the outer circle. The washer method formula is: Math Demo

17. If the same region is rotated about the line x = 2 : The outer radius is: R The inner radius is: r

18. Find the volume of the region bounded by,, and revolved about the y - axis. We can use the washer method if we split it into two parts: outer radius inner radius thickness of slice cylinder Japanese Spider Crab Georgia Aquarium, Atlanta

19. If we take a vertical sliceand revolve it about the y-axis we get a cylinder. cross section If we add all of the cylinders together, we can reconstruct the original object. Here is another way we could approach this problem:

20. cross section The volume of a thin, hollow cylinder is given by: r is the x value of the function. h is the y value of the function. thickness is dx.

21. cross section If we add all the cylinders from the smallest to the largest: This is called the shell method because we use cylindrical shells. Math Demo

22. Find the volume generated when this shape is revolved about the y axis. We can’t solve for x, so we can’t use a horizontal slice directly.

23. Shell method: If we take a vertical slice and revolve it about the y-axis we get a cylinder.

24. Note:When entering this into the calculator, be sure to enter the multiplication symbol before the parenthesis.

25. When the strip is parallel to the axis of rotation, use the shell method. When the strip is perpendicular to the axis of rotation, use the washer method.

26. To find surface area, we can slice a solid and approximate the surface area of these slices by 2π ● f(x) ● Δs, where Δs is the slant height of the slice. We will see in Section 7.4 that Δs can be written as To find surface area, use (SA will exist if f and f’ are continuous on [a, b]