2. Respiratory Safety Public Safety Murray State University

3. You will learn The reasons respirators are necessary The capabilities and limitations of different respirators How to inspect, put on and maintain respirators What to do if something goes wrong while wearing a respirator

4. Medical Evaluations Don’t use a respirator until a health care professional determines you are physically able to do so. Management will organize the testing. For people with existing medical conditions, respirator use can cause injury or death.

5. Respirators Will Protect You Hazardous particles in the air can cause serious injuries or death. Use a respirator whenever you enter an area with hazardous particles in the air. You may not be able to see or smell hazardous air particles until it’s too late.

6. Two Types of Respirators Air purifying respirators (APRs) –Clean the air with Filters Cartridges Canisters Supplied air respirators (SARs) –Supply you with clean air from an outside source

7. Air Purifying Respirators (APRs) Remove harmful substances from the air you breathe so you can stay safe. Have tight fitting face pieces to stop you from breathing contaminated air.

8. Two Types of APRs Particulate removing respirators –filter out dusts, fibers, fumes and mists –may be single-use disposable respirators or multiple-use respirators with disposable filters Gas and vapor removing respirators –remove contaminants by absorption, or chemical reaction –Gas masks are an example

9. Benefits of Air Purifying Respirators (APRs) Lightweight Portable Easy to inspect and maintain Not dependent upon supplied air

10. Limitations of Air Purifying Respirators (APRs) Contaminant-specific cartridges Communication Non-IDLH only Oxygen at 19.5% minimum Assigned protection factor of 10 Not for use in emergency situations

11. Remember Only use APRs in conditions where there is no question what the dangers are and that the APR will provide adequate protection.

12. Supplied Air Respirators (SARs) Provide breathing air that is independent from the environment Range from: –SCBAs –Air-line suppliers –Protective suits

13. Benefits and Limitations of Supplied Air Respirators (SARs) Benefits of SARs are that: –They can be used for any type of contaminant or exposure level Limitations of SARs are that: –Movement is restricted –Hoses can bump into machinery –SCBAs are heavy and their time is limited by the volume of air in the cylinder

14. Qualitative Fit Testing Ensures your respirator fits properly Is performed at initial fitting and then annually after that Relies on your ability to detect a harmless substance in your breathing space

15. Quantitative Fit Testing Measures the amount of hazardous particles that could leak into your respirator Produces a number called the ‘fit factor’ The larger the number, the safer you are

16. Change Cartridges Odor or taste is present inside respirator Breathing becomes difficult During annual respirator fit tests and training When service life indicator indicates cartridge is full

17. Positive Pressure Fit Check Check the fit of your respirator before every use. Close off the exhalation valve and exhale gently. Slight positive pressure should be felt. Don’t use if you hear or feel air leaking.

18. Negative Pressure Fit Check Perform this test every time a respirator is put on. Close off the inlet by covering with the palms. Inhale gently so facepiece collapses slightly, hold for 5 seconds. Only use if no leaks are detected.

19. Respirator Inspection Facepiece Excessive dirt Cracks, tears, holes or distortion Inflexibility Cracked or badly scratched lenses Cracked or broken air-purifying element; threads or gaskets

20. Respirator Inspection Head Strap or Harness Breaks Loss of elasticity Broken or malfunctioning buckles and attachments Excessive worn, serrated edges

21. Respirator Inspection Exhalation Valve Foreign material build up Cracks, breaks, chips in valve Missing or defective cover Improper installation

22. Respirator Inspection Air-Purifying Element Incorrect cartridge Incorrect installation Expired Cracks or dents

23. Respirator Cleaning Dirty, inoperative respirators will not effectively protect you Any good detergent may be used Cleaner and sanitizer is available through the Facilities Management Warehouse

24. Respirator Storage Store in a bag or sealed container labeled with your name Store in a dry, room temperature, dust-free environment

25. Leave the Respirator Area if You Smell or taste something out of the ordinary Feel your eyes or throat becoming irritated Observe a change in your breathing Notice the face piece is leaking or other parts of the respirator are broken Hear an alarm signaling equipment has failed

26. Summary Working in an area with hazardous particles in the air can cause injury or death Air Purifying Respirators remove harmful substances from the air Supplied Air Respirators provide clean air from outside the contaminated work area Fit Testing ensures a proper fit