1. Unitronics 2009

2. Review Hardware Review Software & Utilities Jazz® Series M91 Series
Vision120™ Series
Vision130™ Series
Vision Graphic/Touch OPLC
Color Vision
Software & Utilities

3. Review
Hardware Review
Software & Utilities

4. Jazz® Micro OPLCTM Key Points: Two line display Real Keypad for
Data entry
Modbus and open
protocol communication
SMS/ cellular connection
Auto-tune PID, up to 4 loops
Full project upload
Low cost

5. Jazz® Micro OPLCTM 9 models of JazzTM OPLC JZ10-11-R10 – 6 DI, 4 RO
JZ10-11-T10 – 6 DI, 4 TO
JZ10-11-R16 – 6 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 6 RO
JZ10-11-T17 – 6 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 7 TO
JZ10-11-R31 – 16 DI, 2 D or A (0-10V) inputs, 2AI (0/4-20 mA), 11 RO
JZ10-11-T40 – 16 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 20 TO
JZ10-11-PT15- 3 DI, 3 D or A inputs, 3 PT1000/NI1000 inputs, 5 RO and 1 TO (HSO)
JZ10-11-UN20 – 9 DI, 2 D or A (0-10V) inputs, 1 AI (0/4-20 mA), 1 PT100/TC inputs, 5 RO, 2 TO
JZ10-11-UA24 – 9 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 2 PT100/TC inputs, 5 RO, 2 TO, 2 Analog Outputs

6. M91 Micro OPLCTM Key Points: Two line display
Real Keypad for Data entry
Modbus & open protocol communication
SMS via GSM communication
Full project upload
Auto-tune PID, up to 4 loops
Expandable
Small Data Base (1024 registers)
Low cost

7. M91 Micro OPLCTM 10 models of the M91 OPLC
M91-2-R DI, 1 AI , 6 RO
M91-2-R2C - 10 DI, 2 AI , 6 RO
M91-2-R DI, 2 A/D I, 12 RO
M91-2-R6C - 6 DI, 6 AI, 1HSI, 6 RO
M91-2-RA DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit, 8 RO
M91-2-T DI, 12 TO
M91-2-T2C - 10 DI, 2 A/D I , 12 TO
M91-2-T DI, 16 TO
M91-2-UN DI, 2 A/D/TC/PT100 Inputs (14 bit) , 12 TO
M91-2-UA DI, 2 A/D/TC/PT100 Inputs, 12 bits, 2 AO 12 bits , 10 TO

8. Vision120TM Graphic OPLCTM
Key Points:
Graphic display 128x64
Real Keypad for Data entry
Application size of 448K
2 serial ports RS232/485
Modbus and open protocol
communication
Supports CANopen
SMS/cellular connection-GSM/GPRS
Full project upload
Expandable
Data Table

9. Vision120TM Graphic OPLCTM

10. Vision120TM Graphic OPLCTM
10 models of the V120 OPLC
V R DI, 1 AI , 6 RO
V R2C - 10 DI, 2 AI , 6 RO
V R DI, 2 A/D I, 12 RO
V R6C - 6 DI, 6 AI, 1HSI, 6 RO
V RA DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit, 8 RO
V T DI, 12 TO
V T2C - 10 DI, 2 A/D I , 12 TO
V T DI, 16 TO
V UN DI, 2 A/D/TC/PT100 Inputs (14 bit) , 12 TO
V UA DI, 2 A/D/TC/PT100 Inputs, 12 bits, 2 AO 12 bits , 10 TO

11. Vision130TM Graphic OPLCTM

12. Vision130TM Graphic OPLCTM
Key Points:
Graphic display 128x64, 2.4"
Real Keypad for Data entry
Application size of 512K; 20µsec per 1K
1 build in serial ports RS232/485
Option for a second port RS232/485 or Ethernet
Modbus and open protocol communication serial and over IP
Supports CANopen (CANbus as an add on module)
GPRS/GSM/CDMA enabled
Full project upload
Expandable
Data Table, Text string library

13. Vision130TM Graphic OPLCTM
9 models of the V130 OPLC
V R DI, 2 A/D I, 6 RO
V R DI, 2 A/D I, 12 RO
V RA DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit , 8 RO
V T DI, 2 A/D I, 3HSI and 7 HSO , 12 TO
V T DI, 2 A/D I, 3HSI and 7 HSO, 16 TO
V TA DI, 2 A/D I 14 bits +2 TC/PT100,
2 AO 12 bits, 1HSI 5 HSO , 10 TO
V R6 – 6 DI, 2 A/D I, 4 AI, 1HSI, 6 RO
V TRA DI, 2AI, 2 PT100/TC, 1HSC, 4 RO,
2 AO, 4 HSO.
V TR DI, 2 AI, 3 HSC, 8RO, 4 HSO.

14. VisionTM Graphic/Touch OPLCTM (V230/260/280/290/530)

15. VisionTM Graphic/Touch OPLCTM (V230/260/280/290/530)
Key Points:
Graphic display 128x64 to 320x240; 3.2” – 5.7”
Real Keypad for Data entry/virtual keyboard on the touch
Application size of 1MB;
30µsec per 1K
2 build in serial ports RS232
Option for a 3rd port RS232/485 or Ethernet
Supports CANopen
GPRS/GSM/CDMA enabled
Full project upload
Expandable
Data Table
Modbus and open protocol communication

16. VisionTM Graphic/Touch OPLCTM (V230/260/280/290/530)

17. VisionTM Graphic/Touch OPLCTM (V230/260/280/290/530)
Expansions
EX-A1-expansion adapter
IO-DI8-TO8
IO-DI16
IO-TO16
IO-DI8-RO4
IO-RO8
IO-RO16
IO-DI8ACH
EX90-DI8-RO8
Fast response
IO-AI4-AO2
IO-AO6X
IO-ATC8
IO-LC1/3
IO-PT400
IO-PT4K

18. VisionTM Graphic/Touch OPLCTM (V230/260/280/290/530)
Snap-in I/Os
6 Snap-in models:
V E1B
V E2B
V E3XB
V E4XB
V E5B
V E6B

19. EX-RC1- Remote IO Adapter
The EX-RC1 enables you to remotely locate I/Os
up to 1 kilometer from a PLC. You can include both PLCs and
adapters on the UniCAN network, up to a total of 60 nodes.
Up to 8 I/O modules can be connected to a single adapter.

20. XL Expansion Modules EX-D16A3-RO8 / TO16
24 VDC
16 Digital Inputs
PNP/NPN, including 1 HS Counters
3 Analog Inputs
15 PNP+ 1 PNP/NPN Transistor Outputs,1 HSO
Or 8 Relay output (model EX-D16A3-RO8)
IO D16A3-RO16 / TO16
24 VDC
16 Digital Inputs
PNP/NPN, including 2 HS Counters
3 Analog Inputs
16 Relay/Transistor Outputs

21. VisionTM Color OPLCTM

22. VisionTM Color OPLCTM Vision350TM - The first 3.5“ color
Touch screen OPLC
on the market
Digital, Analog and PT100/TC
inputs, Digital and Analog outputs
Application size of 1MB, 15µsec per 1K
Supports CANopen
Ethernet option
QVGA color TFT display
Support Micro SD

23. VisionTM Color OPLCTM 9 models of the Vision 350TM OPLC
V R DI, 2 A/D I, 6 RO
V R DI, 2 A/D I, 12 RO
V RA DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit , 8 RO
V T DI, 2 A/D I, 3HSI and 7 HSO , 12 TO
V T DI, 2 A/D I, 2 HSI and 7 HSO, 16 TO
V TA DI, 2 A/D I 14 bits +2 TC/PT100, 2 AO 12 bits, 1HSI 5 HSO , 10 TO
V R6 – 6 DI, 2 A/D I, 4 AI, 1HSI, 6 RO
V TRA DI, 2AI, 2 PT100/TC, 1HSC, 4 RO, 2 AO, 4 HSO.
V TR DI, 2 AI, 3 HSC, 8RO, 4 HSO.

24. V130 & V350 with TRA22 or TR34 I/O board
HSC / Shaft Encoder
V130 & V350 with TRA22 or TR34 I/O board
Push-Pull
PNP/NPN
Driver Type
200 kHz Max
100 kHz Max
HSC
50 kHz Max
Shaft encoder
High Speed NPN Transistor output:
Frequency Range kHz
Support PTO

25. VisionTM Color OPLCTM Vision570TM - And much more…
5.7“ color Touch screen OPLC plus Snap-in & expansion I/Os
TFT Color Graphic display, QVGA
Application size of 2MB; 9µsec per 1K
2 build in serial ports RS232/485
Option for a 3rd port RS232/485 or Ethernet
Modbus and open protocol communication serial or over IP
Build in Alarms, string library and trends tasks
CANopen Support
SD Support
Web server capabilities
And much more…

26. The New V570 model with built in I/O
VisionTM Color OPLCTM
The New V570 model with built in I/O
V T34 :
16 DI (Isolated), 2 HSC / Shaft Encoder,
2 AI, 16 TO (Isolated)

27. Review
About Unitronics
Hardware Review
Software & Utilities

28. Software - programming environment
M91 and Jazz are programmed using the U90Ladder
All Vision products are programmed using the Visilogic
In order to ensure Backwards compatibility Unitronics provides also the Version swapper

29. Software Utilities - Remote Access
A tool that the machine builder/system integrator can give his customer as an added value for its selection to work with Unitronics’ products
Using Remote Access one can access the displays of the PLC, operand values, data tables and even download using the UniDownloader

30. Software Utilities - DataXport
DataXport is a server based application that allows to retrieve the data stored at the data tables of the PLC using different communication methods and based on automatic process

31. Software Utilities - Communication
DDE/OPC gives a standard way to connect to the Unitronics OPLC using any SCADA or other Windows based application

32. Software Utilities – SD Suite
SD Suite Use SD Suite to format an SD card to be compatible with Unitronics OPLC, and to Access,convert, read, and export the content of files that a Unitronics OPLC creates on a SD card.

33. Software Utilities – Remote Operator
Remote Operator - Enables you to use a PC to view and work with several remote controller's HMI panel at the same time.

34. Software Utilities – UniDownloader
UniDownloader - Enables you to download complete applications to local or remote controllers. These applications are in compressed .udc format.

35. Thank you