1. Chapter 5 Panko and Panko Business Data Networks and Telecommunications, 8 th Edition © 2011 Pearson Education, Inc. Publishing as Prentice Hall

2.  Introductory Chapters ◦ To provide a solid foundation for later chapters ◦ 1. How we got here ◦ 2. Standards ◦ 3. Security ◦ 4. Management (with a focus on design) © 2011 Pearson Education, Inc. Publishing as Prentice Hall 2

3.  Detailed Topics: ◦ Wired Switched Networks (Chapters 5 and 6)  Chapter 5: Physical layer propagation for copper wires (UTP) and optical fiber  Chapter 6: Switching ◦ Wireless Networks (Chapters 7 and 8) ◦ TCP/IP Internets (Chapters 9 and 10) ◦ Networked Applications (Chapter 11) © 2011 Pearson Education, Inc. Publishing as Prentice Hall 3

4.  The Physical Layer ◦ The only layer that does not deal with messages.  Individual bits are converted directly into signals. ◦ It alone deals with signals, transmission media, and connectors. ◦ It alone deals with propagation effects—changes in signals as they propagate. © 2011 Pearson Education, Inc. Publishing as Prentice Hall 4

5. 5 Signals and Propagation4-Pair UTPLAN Optical FiberCarrier Transmission

6. © 2011 Pearson Education, Inc. Publishing as Prentice Hall 6 The sender transmits a signal (disturbance in the medium) The signal propagates down the medium. The sender transmits a signal (disturbance in the medium) The signal propagates down the medium.

7. 7 If propagation effects are too large, the receiver cannot read the signal. © 2011 Pearson Education, Inc. Publishing as Prentice Hall

8.  Signaling ◦ In analog signaling, the signal rises and falls smoothly in intensity.  Small propagation errors are not fixed. ◦ In binary signals, there are two states per clock cycle.  Small propagation effects do not create errors in reading the signal. 8 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

9.  Signaling ◦ In digital signals, there are a few states per clock cycle.  2, 4, 8, 16, 32, and so on  Can transmit multiple bits per clock cycle  Less error immunity to propagation errors than in binary transmission ◦ Today, most transmission is binary. 9 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

10. 10 Signals and Propagation 4-Pair UTP LAN Optical FiberCarrier Transmission © 2011 Pearson Education, Inc. Publishing as Prentice Hall

11.  4-Pair UTP Cable ◦ Ethernet is the dominant LAN standards family. ◦ Ethernet LANs typically use 4-pair unshielded twisted pair wiring to connect hosts to the nearest switch. ◦ They may also use UTP to connect switches to other switches. ◦ UTP cabling uses copper wires. 11 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

12. 12 Jacket RJ-45 Connector Four Twisted Pairs of Copper Wire Industry Standard Pen © 2011 Pearson Education, Inc. Publishing as Prentice Hall

13.  Cord Organization ◦ A length of UTP wiring is a cord. ◦ Each cord has eight copper wires. ◦ Each wire is covered with dielectric (nonconducting) insulation. 13 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

14.  Cord Organization ◦ The wires are organized as four pairs.  Each pair’s two wires are twisted around each other several times per inch. ◦ There is an outer plastic jacket that encloses the four pairs. 14 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

15.  Connector ◦ RJ-45 connector is the standard connector. ◦ It plugs into an RJ-45 jack in a host, switch, or wall jack. 15 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

16.  Characteristics ◦ Inexpensive and easy to purchase and install ◦ Rugged: can be run over with chairs, and so on ◦ Dominates media for access links between a host and the nearest switch 16 © 2011 Pearson Education, Inc. Publishing as Prentice Hall 堅固耐用

17. 17 © 2011 Pearson Education, Inc. Publishing as Prentice Hall As a signal propagates, its energy attenuates. If the attenuation is too much, the signal will be unreadable. As a signal propagates, its energy attenuates. If the attenuation is too much, the signal will be unreadable.

18. 18 © 2011 Pearson Education, Inc. Publishing as Prentice Hall Noise is energy caused by moving electrons in the wire. Noise energy adds to or subtracts from the signal. Noise is energy caused by moving electrons in the wire. Noise energy adds to or subtracts from the signal.

19.  Solution: 100 meters ◦ Limit cord length to 100 meters.  This makes attenuation propagation effects negligible.  This also makes noise propagation effects negligible. 19 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

20. 20 © 2011 Pearson Education, Inc. Publishing as Prentice Hall EMI is energy from outside the wire.

21. 21 © 2011 Pearson Education, Inc. Publishing as Prentice Hall Cross-talk interference is EMI between wire pairs in the same bundle. Because the pairs are so close, it is strong. But twisting limits it to an acceptable level. Cross-talk interference is EMI between wire pairs in the same bundle. Because the pairs are so close, it is strong. But twisting limits it to an acceptable level.

22. 22 © 2011 Pearson Education, Inc. Publishing as Prentice Hall Terminal cross-talk interference takes place at the untwisted ends, where twisting provides not protection.

23. 23 © 2011 Pearson Education, Inc. Publishing as Prentice Hall Terminal crosstalk interference is the most important type of EMI. Terminal crosstalk interference is the most important type of EMI.

24. 24 Type of Interference Propagation Effect Reduced to Insignificance Mitigation InterferenceAll interference from outside a UTP wire pair Twisting wire pairs Cross-Talk Interference Interference between wire pairs in a cord Twisting wire pairs Terminal Cross- Talk Interference Interference between untwisted ends of wire pairs in a cord Not untwisting wire pairs more than 1.25 cm (0.5 inches) when inserting them into an RJ-45 connector © 2011 Pearson Education, Inc. Publishing as Prentice Hall 緩和

25. 25 © 2011 Pearson Education, Inc. Publishing as Prentice Hall Terminal crosstalk interference Crosstalk interference All EMI Note how EMI, crosstalk interference, and terminal crosstalk interference are related.

26. 26 PrecautionPropagation Effect Reduced to Insignificance Limiting UTP distance to 100 meters Attenuation AND Noise Limiting the untwisting of wires to less than ½ inch at the connector Terminal crosstalk interference © 2011 Pearson Education, Inc. Publishing as Prentice Hall 預防措施

27. 27 © 2011 Pearson Education, Inc. Publishing as Prentice Hall In serial transmission, the signal is sent on a single pair of wires. One bit is sent per clock cycle. In serial transmission, the signal is sent on a single pair of wires. One bit is sent per clock cycle.

28. 28 In parallel transmission, the signal is sent on several pairs. Multiple bits are sent per clock cycle. The benefit of parallel transmission is higher speed. Faster Ethernet uses parallel transmission. In parallel transmission, the signal is sent on several pairs. Multiple bits are sent per clock cycle. The benefit of parallel transmission is higher speed. Faster Ethernet uses parallel transmission. © 2011 Pearson Education, Inc. Publishing as Prentice Hall

29.  How many wire pairs are used in parallel transmission? © 2011 Pearson Education, Inc. Publishing as Prentice Hall 29

30. 30 CategoryTechnologyMaximum Speed Maximum Ethernet Distance at this Speed 5e4-Pair UTP1 Gbps100 meters 64-Pair UTP1 Gbps100 meters 64-Pair UTP10 Gbps55 meters 6A4-Pair UTP10 Gbps100 meters “Category” is a measure of UTP cord quality. © 2011 Pearson Education, Inc. Publishing as Prentice Hall

31. 31 Signals and Propagation4-Pair UTP LAN Optical Fiber Carrier Transmission © 2011 Pearson Education, Inc. Publishing as Prentice Hall

32.  Sends light waves through glass  On/Off signaling ◦ On during a clock cycle = 1 ◦ Off during a clock cycle = 0 ◦ Binary 32 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

33. 33 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

34. 34 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

35. 35 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

36. 36 Phase Waves with different phases can interfere with one another. Waves with different phases can interfere with one another. New © 2011 Pearson Education, Inc. Publishing as Prentice Hall

37.  Windows for very good glass propagation ◦ 850 nanometers (nm) +/- 50 nm ◦ 1,310 nanometers (nm) +/- 50 nm ◦ 1,550 nanometers (nm) +/- 50 nm  Longer wavelengths travel farther.  Longer wavelengths are more expensive to generate.  For LAN distances, 850 nm dominates because it gives sufficient distance. 37 © 2011 Pearson Education, Inc. Publishing as Prentice Hall Light wavelengths are measured in nanometers (nm)

38. 38 © 2011 Pearson Education, Inc. Publishing as Prentice Hall Light travels through the core. The core is surrounded by the cladding. Light travels through the core. The core is surrounded by the cladding. 包覆

39. 39 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

40.  Fiber is good for going farther, not going faster. ◦ Both can be used for speeds up to 10 Gbps ◦ Optical fiber can span longer distances  Less than100 meters, use less expensive 4- pair UTP.  Beyond 100 meters, use fiber. 40 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

41. 41 Access lines connect hosts to the nearest workgroup switch. Access lines connect hosts to the nearest workgroup switch. © 2011 Pearson Education, Inc. Publishing as Prentice Hall

42. 42 Trunk lines connect switches to other switches. Trunk lines connect switches to other switches. © 2011 Pearson Education, Inc. Publishing as Prentice Hall

43. 43 In a hierarchy, there is only a single possible path between hosts. In a hierarchy, there is only a single possible path between hosts. © 2011 Pearson Education, Inc. Publishing as Prentice Hall

44. 44 Full-Duplex (2-way) transmission with two strands in a fiber cord. Each strand carries a signal in one direction. Full-Duplex (2-way) transmission with two strands in a fiber cord. Each strand carries a signal in one direction. © 2011 Pearson Education, Inc. Publishing as Prentice Hall Simplex (One-way) Duplex (Two-way) Half-Duplex Full-Duplex

45. 45 Industry Standard Pen SC Connector ST Connector © 2011 Pearson Education, Inc. Publishing as Prentice Hall UTP only has RJ-45 connectors. Fiber has several types of connectors. UTP only has RJ-45 connectors. Fiber has several types of connectors.

46. 46 Light rays can only enter at certain angles called modes. Light rays can only enter at certain angles called modes. © 2011 Pearson Education, Inc. Publishing as Prentice Hall

47. 47 © 2011 Pearson Education, Inc. Publishing as Prentice Hall If travel distance is long, modes from different pulses will overlap. This will make the signal unreadable.

48. 48 © 2011 Pearson Education, Inc. Publishing as Prentice Hall Overlap is called modal dispersion.

49. 49 Single-mode fiber has a tiny core. Only the straight-through mode can propagate. With only one mode, there is no modal dispersion. Single-mode fiber is limited by absorptive attenuation. Single-mode fiber has a tiny core. Only the straight-through mode can propagate. With only one mode, there is no modal dispersion. Single-mode fiber is limited by absorptive attenuation. © 2011 Pearson Education, Inc. Publishing as Prentice Hall

50. 50 WavelengthCore Diameter Bandwidth Modal Bandwidth Maximum Propagation Distance 850 nm62.5 microns160 MHz.km220 m 850 nm62.5 microns200 MHz.km275 m 850 nm50 microns500 MHz.km550 m To span longer distances with 850 nm light, use higher-quality multimode fiber or a 50 micron core. To span longer distances with 850 nm light, use higher-quality multimode fiber or a 50 micron core. © 2011 Pearson Education, Inc. Publishing as Prentice Hall

51. 51 CharacteristicLAN FiberCarrier WAN Fiber Distance Span200 m to 300 m1 to 40 kilometers Transceiver Wavelength 850 nm1310 nm (and sometimes 1550 nm) Type of FiberMultimode (thick core) Single mode (thin core) Core Diameter50 microns or 62.5 microns 8.3 microns Primary Distance Limitation Modal dispersionAbsorptive attenuation Quality MetricModal bandwidth (MHz.km) NA © 2011 Pearson Education, Inc. Publishing as Prentice Hall

52. 52 Signals and Propagation4-Pair UTPLAN Optical Fiber Carrier Transmission © 2011 Pearson Education, Inc. Publishing as Prentice Hall

53. 53 Telephone carriers use three types of transmission lines. © 2011 Pearson Education, Inc. Publishing as Prentice Hall (PSTN)

54. 54 Local Loop Technology Business or Residential Considerations 2-Pair Data-Grade UTP BusinessFor leased lines up to 2 Mbps Must be pulled to the customer premises, so expensive Not limited to 100 meters Optical FiberBusinessFor leased lines faster than 2 Mbps Must be pulled to the customer premises, so expensive © 2011 Pearson Education, Inc. Publishing as Prentice Hall

55. 55 Local Loop Technology Business or Residential Considerations 1-Pair Voice-Grade UTP ResidentialDesigned only for voice transmission Not limited to 100 meters If a 1-pair VG UTP line carries data, the service is called digital subscriber line (DSL) service Already installed, so avoids the expense of pulling a new line to residences Optical FiberResidentialFiber to the Home (FTTH) New Installing FTTH in whole neighborhoods to reduce installation costs © 2011 Pearson Education, Inc. Publishing as Prentice Hall

56.  Note that 4-pair UTP is NOT used for carrier transmission.  Note also that carrier fiber is NOT limited to 100 meters. © 2011 Pearson Education, Inc. Publishing as Prentice Hall 56

57. 57 © 2011 Pearson Education, Inc. Publishing as Prentice Hall Installed media minimizes provisioning cost, making ADSL inexpensive.

58. 58 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

59. 59 © 2011 Pearson Education, Inc. Publishing as Prentice Hall A splitter must be plugged into each wall jack. It separates voice from data signals. A splitter must be plugged into each wall jack. It separates voice from data signals.

60. 60 © 2011 Pearson Education, Inc. Publishing as Prentice Hall The ADSL modem is needed for the PC. It plugs into the PC via 4-pair UTP. It plugs into the splitter via a telephone line The ADSL modem is needed for the PC. It plugs into the PC via 4-pair UTP. It plugs into the splitter via a telephone line 4-pair UTP Ordinary telephone wire

61. 61 © 2011 Pearson Education, Inc. Publishing as Prentice Hall Voice Data Mixed Voice and Data

62.  Provided by cable television companies  The drop line to homes from the main cable uses coaxial cable.  In “coax,” one wire is in the center and the other conductor is a ring around it, on the same axis. © 2011 Pearson Education, Inc. Publishing as Prentice Hall 62

63. 63 © 2011 Pearson Education, Inc. Publishing as Prentice Hall

64. 64 Data transmission requires two-way amplifiers and a cable modem. Data transmission requires two-way amplifiers and a cable modem. © 2011 Pearson Education, Inc. Publishing as Prentice Hall

65.  Myth: ◦ There is sharing in cable modem service but not in ADSL service. ◦ Truth: Cable trunk line speed is shared, as are backhaul lines to the ISP. ◦ Truth: ADSL access lines are not shared, but DSLAMs are, and so are backhaul lines to the ISP. 65 © 2011 Pearson Education, Inc. Publishing as Prentice Hall backhaul:http://en.wikipedia.org/wiki/Backhaul Transporting traffic between distributed sites (typically access points) and more centralized points of presence

66.  Fiber is run throughout a neighborhood  Installed all at once to reduce cost  Only drop lines have to be added to individual homes  Can produce breakthroughs in downstream and upstream speeds to homes  Multiple simultaneous HDTV signals to a home  In practice, the improvement may not be dramatic 66 © 2011 Pearson Education, Inc. Publishing as Prentice Hall