Presentation is loading. Please wait.

Presentation is loading. Please wait.

Carmel Resins Products for the Corrugated Industry Carmel Resins.

Similar presentations


Presentation on theme: "Carmel Resins Products for the Corrugated Industry Carmel Resins."— Presentation transcript:

1 Carmel Resins Products for the Corrugated Industry Carmel Resins

2 Starch Adhesives Additives Additives Carmel Resins the CP-88 Series

3 Carmel Resins Additives Our premium resin products for corrugated container industry has set quality standards since its introduction in 1988. All of our resins are the result of continuous development to meet our customers needs and the new environment regulations. Carmel resins certified to: o ISO-9001 2008 – quality standard. o ISO-14001 – environment standard. o ISO-18001 – safety standard. o EU REACH preregistration and registration where required. Carmel Resins

4 Water resistant corrugated board is required in a variety of industries: Water Resistance. Foods and beverages Frozen foods High humidity areas Tobacco Fruits and vegetables Flower packaging Outdoor storage Hi-Tech consumer products Carmel Resins

5 CostsCosts Using resins in starch adhesives SAVES production costs Carmel Resins

6 Carton Board Production Costs Paper: ~80% of overall costs. Production: ~ 18.25% of overall costs. Starch Glue: ~ 1.5 % of overall costs. Additives: ~ 0.25% of overall costs.

7 CostCost Using Resins Save costs Carmel Resins Wet Tack Green bond Energy SAVE $ Wet Tack Running speed Productivity SAVE $ Penetration Adhesive Energy SAVE $ Stable Viscosity Adhesive Energy Scrap SAVE $ Dry strength BCT,ECT paper gramage SAVE $

8 the CP-88 Series - Products (waterproofing + extra mechanical features) The tool for these cost savings is

9 Carmel Resins CP-88 - series

10 * Improves dry and wet strength as tested by ECT and FCT. * Enhances the bond wet and dry strength as tested by PAT and BCT.

11 CP-88 additive: 1.You need to add 1/kg per minute continually under stirring conditions. Recommended with dosing pump. 2.pH has to be 11 and above. Service tank: Production line: CP-88 - Method of Use Kitchen If feasible, add the resin to each one of the corrugated units (with dosing pump). Corrugating boards requires 24 hr stacking time (after production) under stirring conditions Requires at least 120-130°C on the corrugated cardboard

12 Thank you for your time Thank you for your time Carmel Resins


Download ppt "Carmel Resins Products for the Corrugated Industry Carmel Resins."

Similar presentations


Ads by Google