Presentation is loading. Please wait.

Presentation is loading. Please wait.

Chapter 23 Electric field 23.1 Properties of Electric Charges

Similar presentations


Presentation on theme: "Chapter 23 Electric field 23.1 Properties of Electric Charges"— Presentation transcript:

1 Chapter 23 Electric field 23.1 Properties of Electric Charges
23.2 Charging Objects By Induction 23.3 Coulomb’s Law 23.4 The Electric Field 23.6 Electric Field Lines 23.7 Motion of Charged Particles in a Uniform Electric Field Norah Ali AL.Moneef

2 23.1 properties of electric charge
Norah Ali AL.Moneef

3 Objects can be charged by rubbing or friction
(b) bring it close to some tiny pieces of paper (a) Rub a plastic ruler Objects charged by this method will attract each other. Norah Ali AL.Moneef

4 we conclude that charges of the same sign repel one another and
charges with opposite signs attract one another Norah Ali AL.Moneef

5 When a glass rod is rubbed with silk, electrons are
In 1909, Robert Millikan discovered that electric charge always occurs as some integral multiple of a fundamental amount of charge e When a glass rod is rubbed with silk, electrons are transferred from the glass to the silk. Because of conservation of charge, each electron adds negative charge to the silk, and an equal positive charge is left behind on the rod. Also, because the charges are transferred in discrete bundles, the charges on the two objects are Note that the electrical charge is measured in coulombs). and we can write q = N e, where N is some integer the electric charge q is said to be quantized the electron has a charge – e and the proton has a charge of equal magnitude but opposite sign +e . Some particles, such as the neutron, have no charge. Norah Ali AL.Moneef

6 A coulomb is the charge resulting from the transfer of 6
A coulomb is the charge resulting from the transfer of x 1018 of the charge carried by an electron 6 Norah Ali AL.Moneef Norah Ali AL.Moneef

7 How many electrons constitute 1 mC?
During any process, the net electric charge of an isolated system remains constant i.e. is conserved. How many electrons constitute 1 mC? N =1x10-6/1.6x10-19 = 6x1012 electrons Norah Ali AL.Moneef

8 23.2 Charging Objects By Induction
Electrical conductors are materials in which some of the electrons are free electrons that are not bound to atoms and can move relatively freely through the material; electrical insulators are materials in which all electrons are bound to atoms and cannot move freely through the material .When materials such as copper, aluminum, and silver are good electrical conductors are charged in some small region, the charge readily distributes itself over the entire surface of the material When electrical insulators such as glass, rubber are charged by rubbing, only the area rubbed becomes charged, and the charged particles are unable to move to other regions of the material Semiconductors are a third class of materials, and their electrical properties are somewhere between those of insulators Conductor transfers charge on contact Insulator does not transfer charge on contact Semiconductor might transfer charge on contact Norah Ali AL.Moneef

9 (a) The charged object on the left induces a charge distribution on the surface of an insulator due to realignment of charges in the molecules. Norah Ali AL.Moneef

10 Charging a metallic object by induction (that is, the two objects never touch each other)
(a) A neutral metallic sphere , with equal numbers of positive and negative charges (b) The electrons on the neutral sphere are redistributed when a charged rubber rod is placed near the sphere. . (c) When the sphere is grounded, some of its electrons leave through the ground wire. (e) When the rod is removed, the remaining electrons redistribute uniformly and there is a net uniform distribution of positive charge on the sphere (d) When the ground connection is removed, the sphere has excess positive charge that is nonuniformly distributed Norah Ali AL.Moneef

11 (A) Negative charge (D) No net charge
Conceptual Question Assume that you have two uncharged, insulated metallic spheres A and B that are in contact with each other. If you bring a positively charged insulated rod near sphere A and hold it there while you move sphere B away, what charge will sphere B have? (A) Negative charge (D) No net charge (B) Positive charge (E) None of these (C) Either pos. or neg. charge Norah Ali AL.Moneef

12 Norah Ali AL.Moneef

13 23.3 Coulomb’s Law Charles Coulomb (1736–1806) measured the magnitudes of the electric forces between charged objects using the torsion balance we can express Coulomb’s law as an equation giving the magnitude of the electric force (sometimes called the Coulomb force) between two point charges Coulomb’s law Norah Ali AL.Moneef

14 charges of the same sign repel one another
where ke is a constant called the Coulomb constant = x N m 2/C2 Ke = 9x N m 2/C2 charges of the same sign repel one another charges with opposite signs attract one another Norah Ali AL.Moneef

15 magnitude direction where rˆ is a unit vector directed from q1 toward q2,. the electric force obeys Newton’s third law, the electric force exerted by q2 on q1 is equal in magnitude to the force exerted by q1 on q2 and in the opposite direction; that is, F21 = - F12. Norah Ali AL.Moneef

16 The force also gets stronger if the amount of charge becomes larger.
(do not put signs on the charges when you use Coulomb’s law) The force between two charges gets stronger as the charges move closer together. The force also gets stronger if the amount of charge becomes larger. The force between two charges is directed along the line connecting their centers. Electric forces always occur in pairs according to Newton’s third law, like all forces. Norah Ali AL.Moneef

17 Example Which charge exerts greater force? Two positive point charges, Q1=50mC and Q2=1mC, are separated by a distance L. Which is larger in magnitude, the force that Q1 exerts on Q2 or the force that Q2 exerts on Q1? What is the force that Q1 exerts on Q2? What is the force that Q2 exerts on Q1? Therefore the magnitudes of the two forces are identical!! Well then what is different? The direction. Which direction? Opposite to each other! What is this law? Newton’s third law, the law of action and reaction!! Norah Ali AL.Moneef

18 Two point charges separated by a distance r
exert a force on each other that is given by Coulomb’s law. The force F21 exerted by q2 on q1 is equal in magnitude and opposite in direction to the force F12 exerted by q1 on q2. (a) When the charges are of the same sign, the force is repulsive. (b) When the charges are of opposite signs, the force is attractive When more than two charges are present, the resultant force on any one of them equals the vector sum of the forces exerted by the various individual charges. For example, if four charges are present, then the resultant force exerted by particles 2, 3, and 4 on particle 1 is Norah Ali AL.Moneef

19 Double one of the charges Change sign of one of the charges
force doubles Change sign of one of the charges force changes direction Change sign of both charges force stays the same Double the distance between charges force four times weaker Double both charges force four times stronger ( the force quadruples ) Norah Ali AL.Moneef

20 Gravitation force is always attractive.
The electric force is very much like gravity. Both forces act at a distance. Charge is like mass, although mass is always positive and the force of gravity is always attractive. In fact, the general law of gravitation is very much like the Coulomb's Law. The force between two bodies of mass m1 and mass m2 a distance r apart is Gravitation force is always attractive. Norah Ali AL.Moneef

21 Example Two point charges repel each other with a force of 4×10 -5 N at a distance of 1 m. The two charges are: (a) both positive (b) both negative (c) alike (d) unlike Example Two charges of- Q are 1 cm apart. If one of the charges is replaced by a charge of +Q, the magnitude of the force between them is; (a) zero (b) smaller (c) the same (d) larger Norah Ali AL.Moneef

22 Example : Example : Norah Ali AL.Moneef

23 Example : find the magnitude of the force exerted between the proton and the electron in the hydrogen atom. The force between these tiny charges, each one of size 1.6 x C (but opposite in sign, which we ignore here) separated by a distance of x m is Norah Ali AL.Moneef

24 Example : Norah Ali AL.Moneef

25 Example : Two protons in a molecule are separated by 3.80 x m. Find the electric force exerted by one proton on the other. (b) How does the magnitude of this force compare to the magnitude of the gravitational force between the two protons (mp=1.67 x10-27 Kg ) Thus, the gravitational force between charged atomic particles is negligible when compared with the electric force. Norah Ali AL.Moneef

26 Example - Forces between Electrons
What is relative strength of the electric force compared with the force of gravity for two electrons?(me=9.11x10-31 Kg) Norah Ali AL.Moneef

27 Example : Norah Ali AL.Moneef

28 3.The magnitude of the Coulomb force is F = kq1q2/r2
Example : What is the magnitude of the electric force of attraction between an iron nucleus (q=+26e) and its innermost electron if the distance between them is 1.5 x m 3.The magnitude of the Coulomb force is F = kq1q2/r2 F=(9 x109N·m2/C2)(26)(1.6x10–19 C)(1.6 x10–19C)/(1.5 x 10–12 m)2 = 2.7 x 10–3 N. Norah Ali AL.Moneef

29 Zero Resultant Force, Example
Where is the resultant force equal to zero? The magnitudes of the individual forces will be equal Directions will be opposite This is another location at which the magnitudes of the forces on q3 are equal, but both forces are in the same direction at this location. Norah Ali AL.Moneef

30 Electric Force of 2 charges
Ex1) Find the total electric force on q1. You must use Newton’s Laws for these problems Step 1) Draw all forces Step 2) Find the magnitudes of the forces individually Norah Ali AL.Moneef

31 Example Calculate the net electrostatic force on charge Q3 shown in the figure due to the charges Q1 and Q2. . (a) F32 is repulsive (the force on Q3 is in the direction away from Q2 because Q3 and Q2 are both positive) whereas F31 is attractive (Q3 and Q1 have opposite signs), so F31 points toward Q1. (b) Adding F32 to F31 to obtain the net force. Norah Ali AL.Moneef

32 The forces, components, and signs are as shown in the figure
The forces, components, and signs are as shown in the figure. Result: The magnitude of the force is 290 N, at an angle of 65° to the x axis. Conceptual Example Make the force on Q3 zero. In the figure, where could you place a fourth charge, Q4 = -50 μC, so that the net force on Q3 would be zero? Solution: The force on Q3 due to Q4 must exactly cancel the net force on Q3 from Q1 and Q2. Therefore, the force must equal 290 N and be directed opposite to the net force Norah Ali AL.Moneef

33 23 .4 The Electric Field The electric field at any point in space is defined as the force exerted on a tiny positive test charge divide by the test charge Electric force per unit charge What kind of quantity is the electric field? Vector quantity. What is the unit of the electric field? N/C The magnitude of the electric field at a distance r from a single point charge Q is Norah Ali AL.Moneef

34 Example : Find the electric field Norah Ali AL.Moneef

35 Example: Electric field of a single point charge.
Calculate the magnitude and direction of the electric field at a point P which is 30 cm to the right of a point charge Q = -3.0 x 10-6 C. . Electric field at point P (a) due to a negative charge Q, and (b) due to a positive charge Q, each 30 cm from P. Solution: Substitution gives E = 3.0 x 105 N/C. The field points away from the positive charge and towards the negative one. Norah Ali AL.Moneef

36 A map of the electrical field can be made by bringing a positive test charge into an electrical field. When brought near a negative charge the test charge is attracted to the unlike charge and when brought near a positive charge the test charge is repelled. You can draw vector arrows to indicate the direction of the electrical field. This is represented by drawing lines of force or electrical field lines. Norah Ali AL.Moneef

37 Point negative charge q1 r E= kq1/r2 q1 Norah Ali AL.Moneef

38 A test chargeq0 at point P is a distance r from apoint charge q.
(a) If q is positive, then the force on the test charge is directed away from q. (b) For the positive source charge, the electric field at P points radially outward from q. (c) If q is negative, then the force on the test charge is directed toward q. (d) For the negative source charge, the electric field at P points radially inward toward q. Norah Ali AL.Moneef

39 Electric Field Lines Electric field lines penetrating two surfaces. The magnitude of the field is greater on surface A than on surface B. The electric field vector is tangent to the electric field line at each point. The line has a direction, indicated by an arrowhead, that is the same as that of the electric field vector. The direction of the line is that of the force on a positive test charge placed in the field. The number of lines per unit area through a surface perpendicular to the lines is proportional to the magnitude of the electric field in that region. Thus, the field lines are close together where the electric field is strong and far apart where the field is weak. Norah Ali AL.Moneef

40 23.6 Electric Field Lines (Point Charge)
(vector) Field Lines (Lines of force) Electric field lines (lines of force) are continuous lines whose direction is everywhere that of the electric field Norah Ali AL.Moneef

41 The charge on the right is twice the magnitude of the charge on the left (and opposite in sign), so there are twice as many field lines, and they point towards the charge rather than away from it. Norah Ali AL.Moneef

42 Unequal charges –Ve > + Ve Equal charges: same number density
Like charges (++) Opposite charges (+ -) Because the charges are of equal magnitude, the number of lines that begin at the positive charge must equal the number that terminate at the negative charge. At points very near the charges, the lines are nearly radial. The high density of lines between the charges indicates a region of strong electric field Unequal charges –Ve > + Ve Norah Ali AL.Moneef

43 The number of field lines starting (ending) on a positive (negative) charge is proportional to the magnitude of the charge since if object 1 has charge Q1 and object 2 has charge Q2, then the ratio of number of lines is N2/N1=Q2/Q1. Norah Ali AL.Moneef

44 The rules for drawing electric field lines are :
• The lines must begin on a positive charge and terminate on a negative charge. In the case of an excess of one type of charge, some lines will begin or end infinitely far away. • The number of lines drawn leaving a positive charge or approaching a negative charge is proportional to the magnitude of the charge. • No two field lines can cross. Norah Ali AL.Moneef

45 vector sum of the electric fields of all the charges.
at any point P, the total electric field due to a group of source charges equals the vector sum of the electric fields of all the charges. For discrete point charges, we can use the superposition principle and sum the fields due to each point charge: q2 q3 p q1 Norah Ali AL.Moneef 24

46 1) 2) 3) 4) 5) no way to tell What are the signs of the charges whose electric fields are shown at below? Electric field lines originate on positive charges and terminate on negative charges. Norah Ali AL.Moneef

47 Which of the charges has the greater magnitude?
1) 2) 3) Both the same Which of the charges has the greater magnitude? The field lines are denser around the red charge, so the red one has the greater magnitude. Follow-up: What is the red/brown ratio of magnitudes for the two charges? Norah Ali AL.Moneef

48 Example : Which of the following statements about electric field lines associated with electric charges is false? (a) Electric field lines can be either straight or curved. (b) Electric field lines can form closed loops. (c) Electric field lines begin on positive charges and end on negative charges. (d) Electric field lines can never intersect with one another. Answer: (b). Electric field lines begin and end on charges and cannot close on themselves to form loops. Norah Ali AL.Moneef

49 Example : Find the electric field due to a point charge of 0.5 mC at a distance of 4 cm from it in vacuum q =0.5×10–3 C, r = 4×10–2 m, Recall E =kq/r2 and k=9 x 109 N.m2/C2 E = 9x109 N.m2/C2 0.5 X10-3 C/(4x 10-2 m)2 = 2.82×1010 N/C Norah Ali AL.Moneef

50 Example : .B 3. Rank the magnitudes E of the electric field at points A, B, and C shown in the figure. A) EC>EB>EA B) EB>EC>EA C) EA>EC>EB D) EB>EA>EC E) EA>EB>EC .C .A Norah Ali AL.Moneef

51 Example : Rank the electric field strength in order from smallest to largest. A: E1 < E2 < E3 = E4 B: E3 = E4 < E2 < E1 C: E2 = E3 < E4 < E1 D: E1 < E4 < E2 = E3 Norah Ali AL.Moneef

52 B. It reverses direction.
Example : A test charge of +3 µC is at a point P where an external electric field is directed to the right and has a magnitude of 4×106 N/C. If the test charge is replaced with another test charge of –3 µC, what happens to the external electric field at P ? A. It is unaffected. B. It reverses direction. C. It changes in a way that cannot be determined. Norah Ali AL.Moneef

53 At the position of the dot, the electric field points
Example : At the position of the dot, the electric field points 1. Left. 2. Down. 3. Right. 4. Up. 5. The electric field is zero. Norah Ali AL.Moneef

54 We have q1=+10 nC at the origin, q2 = +15 nC at x=4 m.
Example of finding electric field from two charges We have q1=+10 nC at the origin, q2 = +15 nC at x=4 m. What is E at y=3 m and x=0? point P x y q1=10 nc q2 =15 nc 4m 3m P Find electric field due to both charges at point p Norah Ali AL.Moneef

55 x Example continued E =kq/r2 k=9 x 109 N.m2/C2 Field due to q1
y q1=10 nc q2 =15 nc 4 3 E f Field due to q1 5 E = 9x109 N.m2/C2 10 X10-9 C/(3m)2 = 10 N/C (in the y direction). f Ey= 10 N/C Ex= 0 Field due to q2 E = 9 x 109 N.m2/C2 15 X10-9 C/(5m)2 =5.4 N/C at some angle f Resolve into x and y components Now add all components Ey=E sin f = 5.4 (3/5) = 3.4N/C Ey= = 13.4 N/C Ex=E cos f = 5.4 (- 4)/5 = N/C Ex= N/C magnitude Norah Ali AL.Moneef

56 x Using unit vector notation we can
Example continued Ey= = 13.4 N/C x q1=10 nc q2 =15 nc 4 3 Ex= N/C Magnitude of electric field Using unit vector notation we can also write the electric field vector as:  = tan -1 Ey/Ex= tan -1 (13.4/-4.3)= 72.8⁰ Norah Ali AL.Moneef

57 Example : Three point charges are aligned along the x axis as shown in the Figure. Find the electric field at the position (2.00, 0) and Norah Ali AL.Moneef

58 From the figure find the electric field at (0,0)
Example : From the figure find the electric field at (0,0) (a) Norah Ali AL.Moneef

59 23.7 Motion of a Charged Particle in a Uniform Electric Field
If we know the electric field, we can calculate the force on any charge: The direction of the force depends on the sign of the charge – in the direction of the field for a positive charge, opposite to it for a negative one. Norah Ali AL.Moneef

60 Electric Field lines Uniform Field From infinity To infinity
Equispaced parallel straight lines Norah Ali AL.Moneef

61 23.7 Motion of a Charged Particle in a Uniform Electric Field
When a particle of charge q and mass m is placed in an electric field E, the electric force exerted on the charge is q E. If this is the only force exerted on the particle, it must be the net force and causes the particle to accelerate according to Newton’s second law If the electric field E is uniform (magnitude and direction), the electric force F on the particle is constant. If the particle has a positive charge, its acceleration a and electric force F are in the direction of the electric field E. If the particle has a negative charge, its acceleration a and electric force F are in the direction opposite the electric field E. Norah Ali AL.Moneef

62 An Accelerating Positive Charge
A positive point charge q of mass m is released from rest in a uniform electric field E directed along the x axis,. Describe its motion. The acceleration is constant a = qE/m. The motion is simple linear motion along the x axis. We apply the equations of kinematics in one dimension A positive point charge q in a uniform electric field E undergoes constant acceleration in the direction of the field. Choosing the initial position of the charge as xi=0 and assigning vi = 0 because the particle starts from rest, the position of the particle as a function of time is The speed of the particle is Norah Ali AL.Moneef

63 the kinetic energy of the charge after it has moved a distance ∆x = xf - xi :
from the work–kinetic energy theorem because the work done by the electric force is Fe ∆ x = qE ∆ x and W = ∆ K. Norah Ali AL.Moneef

64 is approximately uniform .
The electric field in the region between two oppositely charged flat metallic plates is approximately uniform . Suppose an electron of charge "e is projected horizontally into this field from the origin with an initial velocity at time t = 0. Because the electric field E in the Figure is in the positive y direction, the acceleration of the electron is in the negative y direction. That is, Norah Ali AL.Moneef

65 An electron is projected horizontally into a uniform electric field produced by two charged plates. The electron undergoes a downward acceleration (opposite E), and its motion is parabolic while it is between the plates. Because the electric field E in the Figure is in the positive y direction, the acceleration of the electron is in the negative y direction. That is, the acceleration is constant, we can apply the equations of kinematics in two Dimensions with vxi = vi and vyi = 0. Norah Ali AL.Moneef

66 After the electron has been in the electric field for a time interval, the components of its velocity at time t are Its position coordinates at time t are t = xf / vi After the electron leaves the field, the electric force vanishes and the electron continues to move in a straight line in the direction of v in with a speed v > vi Norah Ali AL.Moneef

67 Electron Beams; Cathode Ray Tubes
Televisions, Oscilloscopes, Monitors, etc. use an electron beam steered by electric fields to light up the (phosphorescent) screen at specified points electron beam screen metal plates cathode emitter E-field Norah Ali AL.Moneef

68 Which electric field is responsible for the trajectory of the proton?
Norah Ali AL.Moneef

69 =2(1.9 x 10 -19C) (1.33×104 N/C) (1.25m) l 9.11×10-31kg
An electron (mass m = 9.11×10-31kg) is accelerated in the uniform field E (E = 1.33×104 N/C) between two parallel charged plates. The separation of the plates is 1.25 cm. The electron is accelerated from rest near the negative plate and passes through a tiny hole in the positive plate, as seen in the figure. With what speed does it leave the hole? Vf 2 = vi2 + 2a (∆) Vf 2 = 2ad = 2(qE/m) ∆ F = qE = ma a = qE/m Vf 2 = 2a ∆ = 2(qE/m) ∆ =2(1.9 x C) (1.33×104 N/C) (1.25m) l 9.11×10-31kg Vf = 8.3 x m/s Norah Ali AL.Moneef

70 Example : Electron moving perpendicular to .
Suppose an electron traveling with speed v0 = 1.0 x 107 m/s enters a uniform electric field =2x104N/C , which is at right angles to v0 as shown. Describe its motion by giving the equation of its path while in the electric field. Ignore gravity. Solution: The acceleration is in the vertical direction (perpendicular to the motion in -y -direction) a = –eE/m =1.6x1019x2x104/9.11x10-31. y = ½ ay2 x = v0t; y = -(eE/2mv02)x2 Norah Ali AL.Moneef

71 Example: An electron is projected perpendicularly to a downward electric field of E= 2000 N/C with a horizontal velocity v=106 m/s. How much is the electron deflected after traveling 1 cm. e V d E E Since velocity in x direction does not change, t=d/v =10-2/106 = 10-6 sec, so the distance the electron falls upward is y =1/2at2 = 0.5*eE/m*t2 = 0.5*1.6*10-19*2*103/ *(10-8)2 = m Norah Ali AL.Moneef

72 Example : ; The electrons in a particle beam each have a kinetic energy of 1.60 x J. What are the magnitude and direction of the electric field that stops these electrons in a distance of 10.0 cm? Norah Ali AL.Moneef

73 Example : An electron and a proton are each placed at rest in an electric field of 520 N/C. Calculate the speed of each particle 48.0 ns after being released. Norah Ali AL.Moneef

74 Example : An object having a net charge of 24.0 C is placed in a uniform electric field of 610 N/C that is directed vertically. What is the mass of this object if it “floats” in the field? Norah Ali AL.Moneef

75 Example : Three point charges are located at the corners of an equilateral triangle. Calculate the net electric force on the 7.00 μC charge. Norah Ali AL.Moneef

76 Electric charges have the following important properties:
• Unlike charges attract one another, and like charges repel one another. • Charge is conserved. • Charge is quantized—that is, it exists in discrete packets that are some integral multiple of the electronic charge. Conductors are materials in which charges move freely. Insulators are materials in which charges do not move freely. Norah Ali AL.Moneef

77 where ˆr is a unit vector directed from the charge to the point in question.
The electric field is directed radially outward from a positive charge and radially inward toward a negative charge. The electric field due to a group of point charges can be obtained by using the superposition principle. That is, the total electric field at some point equals the vector sum of the electric fields of all the charges: Norah Ali AL.Moneef

78 to the magnitude of E in that region.
Electric field lines describe an electric field in any region of space. The number of lines per unit area through a surface perpendicular to the lines is proportional to the magnitude of E in that region. A charged particle of mass m and charge q moving in an electric field E has an acceleration Norah Ali AL.Moneef

79 Unit Modifiers for Reference
Smaller Centi = Milli ( m ) = 10-3 Micro () = 10-6 Nano ( n ) = 10-9 Pico ( p ) = Larger Kilo (K )= 103 Mega = 106 Giga = 109 Tera = 1015 Examples: 5mC = .005C 10k =  Norah Ali AL.Moneef


Download ppt "Chapter 23 Electric field 23.1 Properties of Electric Charges"

Similar presentations


Ads by Google