1. CHAPTER NT Installation Screens

2. Chapter Objectives Explain the installation in detail Focus on the three stages of installation Use screen images to illustrate each step of the installation procedure

3. Chapter Modules Installation Preparation Disk Partitioning and Formatting Stage 1: Information Gathering Stage 2:Installing the Windows Networking Stage 3: Finishing the Setup

4. © N. Ganesan, All rights reserved. MODULE Installation Preparation (Using Floppy Disks)

5. Module Objectives Installation package Launching the installation Selection and confirmation of of storage devices Launching from the NT - CD

6. Installation Package 3 Floppy Disks CD-ROM

7. Launching of the Installation Process Insert the disk labeled Windows NT Server Setup Disk 1 into drive A to boot and launch the OS installation.

8. Insertion of Second Floppy Disk Please insert the disk labeled Windows NT Server Setup Disk #2 into drive A. *Press ENTER when ready.

9. Initial Welcome Screen Welcome to Setup. The setup program for the Microsoft Windows NT operating system version 4.0 prepares Windows NT to run on your computer. To learn more about Windows NT Setup before continuing, press F1. To setup Windows NT now, press ENTER. To repair a damaged Windows NT Version 4.0 installation, press R. To quit Setup without installing Windows NT, Press F3.

10. Auto or Manual Selection of Storage Devices Setup automatically detects floppy disk controllers and standard EDDI/IDE hard disks without user intervention. However, on some computers detection of certain other mass storage devices, such as SCSI adapters and CD-ROM drives, can cause the computer to become unresponsive or to malfunction temporarily. For this reason, you can bypass Setup’s mass storage device detection and manually select SCSI adapters, CD-ROM drives, and special disk controllers such as drive array’s) for installation. To continue, Press ENTER. Setup will attempt to detect mass storage device in your computers. To skip mass storage device detection, press S. Setup will allow you to manually select SCSI adapters., CD-ROM drives, and special disk controllers for installation.

11. Insertion Notification for Third Floppy Disk Please insert the disk labeled Windows NT Server Setup Disk #3 into drive A. *Press ENTER when ready.

12. Identification and Confirmation of Storage Devices Setup has detected the following storage devices in your computer. SCSI CD-ROM PCI SCSI Controller SCSI Adaptec AHA-2940 SCSI controller To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows NT, including those for which you have a device support disk from a mass storage device manufacturer, press S. If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with windows NT, press ENTER.

13. Insertion of Windows NT CD Please insert the compact disk labeled Windows NT Server CD-ROM into your CD-ROM *Press ENTER when ready.

14. END OF MODULE

15. © N. Ganesan, All rights reserved. MODULE Disk Partitioning and Formatting

16. Module Objectives License agreement Detection of computer configuration Partition information Selection of file type for formatting Directory selection for NT installation Optional detailed hard disk examination Completion of disk partitioning and formatting

17. License Agreement Windows NT License Agreement Windows NT Server MICROSOFT LICENCE AGREEMENT SERVER LICENSE FOR MIRSOFORT SERVER PRODUCTS IMPORTANT READ CAREFULLY. ……………...

18. Server Installation Target Setup has found Windows NT on your hard disk in the directory shown below. C:\\WINNT “Windows NT Workstation Version 3.51” Setup recommends upgrading this Windows NT installation to Microsoft Windows NT version 4.0. Upgrading will preserve user account and security information, user preferences, and other configuration information. To upgrade Windows NT in the directory shown above, press ENTER. To cancel upgrade and install a fresh copy of Windows NT, press N.

19. Detection of Computer Configuration

20. Partition Information C: FAT 2048 MB 2048 MB SCSI Disk

21. Selection of File Type Leave the current file system intact Convert the partition into NTFS. C: FAT 2048 MB on 2048 MB SCSI disk.

22. Selection of Formatting WARNING: Formatting this drive will erase all data currently stored m on it. Please confirm that you would like to format C: FAT (VOL)2048 (1986 MB free) on 2048 MB SCSI Disk. To format the drive, press F. To select a different partition for Windows NT, press ESC.

23. Directory Selection for NT Installation Setup installs Windows NT files onto your hard disk. Choose the location where you want these files to be installed: \\WINNT To change the suggested location, press the BACKSPACE key to delete characters and then type the directory where your want Windows NT installed.

24. Optional Detailed Hard Disk Examination for Corruption Setup will now examine your hard disk(s) for corruption. In addition to a basic examination, Setup can perform a more exhaustive secondary examination on some drives. This can be a time consuming operation, especially on large or very full drives. To allows Setup to perform an exhaustive secondary examination of your hard disk(s), press ENTER. To skip the exhaustive examination, press ESC.

25. Completion of Disk Partitioning and Formatting

26. END OF MODULE

27. © N. Ganesan, All rights reserved. MODULE Stage 1: Information Gathering

28. Module Objectives Launching from NT CD-ROM Setup options Specification of licensing mode CD key input Server type specification Administrator’s password Emergency repair disk request OS component selection for installation

29. NT CD-ROM Insertion Notification Please insert the Compact Disc labeled ‘Windows NT Server CD-ROM’ into your CD-ROM drive (E: ) and then click OK. You can also click OK if you want files to be copied from an alternative location such as a floppy disk or a network server. OKOKCancel

30. Start of Information Gathering

31. Setup Options

32. Organization, Licensing Modes and Computer Name X number of concurrent users.

33. CD Key Specification REGISTRATION Please locate your 10 digit ‘CD Key’ and enter it in the space below. You will find the number on the yellow sticker on the back of your CD case. <Back><Next>

34. Specify Server Type

35. Specify Administrator’s Password

36. Emergency Repair Disk

37. OS Component Selection

39. END OF MODULE

40. © N. Ganesan, All rights reserved. MODULE Stage 2: Installing the Windows Networking

41. Module Objectives Starting the installation of Windows networking Indicating server network connection Optional Internet Information Server installation NIC scanning and setup Network protocol selection Selection of network services Cont.

42. Module Objectives Cont. Installation of selected networking features NIC configuration confirmation Selection of service binding Starting the network for setup features to take effect Specification of computer and domain name

43. Installing Windows NT Networking

44. Server Network Connection

45. Optional Internet Server Installation

46. NIC Scanning and Setup Initiation

47. Network Protocol Selection

48. Selection of Network Services

49. Installation of Selected Networking Features

50. NIC Configuration Interrupt Number I/O Port Address: I/O Channel Ready: Transceiver Type: Continue 10 D000 Late BNC Cancel Help

51. Selection of Service Binding

52. Starting the Network for Setup Features to Take Effect Windows NT is now ready to start the network so that you can complete the installation of networking. Click Next to start the network. Click Back to stop the network if it is running. <BackNext >

53. Specification of Computer and Domain Name

54. END OF MODULE

55. © N. Ganesan, All rights reserved. MODULE Stage 3: Finishing the Setup

56. Module Objectives Beginning of the finishing stage of setup Date and time zone Display property adjustment Creation of emergency repair disk Completion of NT installation Restarting and beginning of the logon process

57. Finishing the Setup Setup is almost finished. After you answer a few more questions, Setup will complete installation. To continue, click finish. 1) Gathering information about your computer 2) Installing Windows NT Networking 3) Finishing Setup

58. Data and Time (Zone) Specification

59. Display Characteristics Specifications Display Setup

60. Creation of Emergency Repair Disk Label a floppy disk ‘Emergency Repair Disk’ and insert it into drive A. Select OK when the disk is in the drive. Warning: All data in the floppy disk will be erased. OKOKCancel

61. Completion of NT Installation Windows NT 4.0 has been installed successfully. Remove disks from floppy drives and compact discs from CD-ROM drives and chose Restart Computer. Restart Computer

62. Beginning Logon

63. END OF MODULE END OF CHAPTER