2. ZPDA /ZPD-KI high accuracy pump dosing system
ZPDA with VS
gear box motor ready for use with FD
bell housing, coupling (HBE)
integrated counter
high precision gear pump ZPDA (Beinlich)
3 lip block chamber
manifold (Beinlich)
integrated pressure and temperature controll
bypass-port
positive displacement gear flow meter VS (VSE)
2-chanel sensory
NEW interpolation system for all flow meters available

3. ZPDA /ZPD-KI high accuracy pump dosing system
gear box motor ready for FD
bell housing, coupling (HBE)
dosing pump ZPD (Beinlich)
3 lip block chamber
version with running plates (KIS)

4. ZPDA /ZPD-KI high accuracy pump dosing system
complete stainless steel, coatings or nitrated steel available
outlet pressures up to 200 bar
viscosity range from 10 cPs to 150’000 cPs
displacements :
size 1 housing:
0,1; 0,3; 0,6; 1,2; 1,8;
2,4; 3,0; 4,8; 6,0; 10,0 cc/rev
size 2 housing:
10,0; 12,0; 16,0;
20,0; 22,0; 26,0 cc/rev
built as ZPDA adaptable or as
“KI” version with running plates
all pumps with speed indicator – mounted in the bell housing – available
used as ZPDA available with manifold and
directly mounted flow meter of VSE

5. Special marks for ZPDA packing glands 3 lip block chamber
variable shaft sealant systems for:
packing glands
3 lip block chamber
mechanical contact seal
swift mounting and demounting, short break down times
same shaft sealing construction for all pumps in the same housing size; minimized spare part storage
connecting via bell housing
all pumps available with mag-drive (DST)
inlet and outlet ports in the back-plate
alternatively
-standard manifold (optional with foot bracket) or
-customised manifold
(e.g. available with integrated ports of pressure or temperature control and/or by-pass function)

6. Special marks for ZPDA - 15 bar standard inlet pressure
mechanical contact seal
- 15 bar standard inlet pressure
- combination with block chamber in FKM - Face SISIC / SISIC (Ceramics)
3 lip block chamber
10 bar standard inlet pressure
PTFE lip seal ring to the medium
FKM seal rings creating a block chmaber
made as a “run through” block chamber which is flushable

7. Special marks for ZPDA packing glands 50 bar standard inlet pressure
combined with a lip seal rings in FKM to create a block chamber
with a central taper to maintain through the bell housing
magnetically coupling
25 bar standard inlet pressure
With a easy to handle and to align by using a HBE bell housing
available in DST standard sizes

8. Advantages of ZPDA • Beinlich Pump Systems; Germany
+ wide displacement range
+ well known for customised solutions
+ knowledge of customer needs
+ application knowledge
+ can work on sub-systems: mag-drives (DST),
flow-meter (VSE), gear boxes/motors,...
+ international team for sales and service with
partners.
+ able to work in higher viscosities with
ZPD KIS range
+ small administration with high flexibility

9. THANKS YOU FOR YOUR INTEREST !!!