Download presentation
Published byWilfrid Neal Modified over 9 years ago
1
EXAMPLE Pathways of Liquid Effluents in Groundwater and Surface Water (Section 2.4.13 SAR)
FRAMES-2.0 Workshop U.S. Nuclear Regulatory Commission Bethesda, Maryland November 15-16, 2007 Pacific Northwest National Laboratory Richland, Washington
2
Purpose Demonstrate Hierarchical Modeling
SSAR assessment: instantaneous mixing, advection, retardation, decay Modeling: mass balance, advection, dispersion, retardation, decay Instantaneous release Long-term release (20-yr leak) Explore Conservative Assumptions Full mixing over the Aquifer Depth Largest Darcy Velocity No Dispersion Register and use an Excel Spreadsheet 2
3
Problem Description (direct quote from SAR)
“Reactor Coolant Storage Tank is postulated to rupture, and 80% of its liquid volume (92 m3) is assumed to be released in accordance with Branch Technical Position 11-6…Flow from the rupture is postulated to flood the building and migrate past the building containment structure and sump collection system and enter the subsurface at the top of the building slab…(V)ertical downward flow ensues. A pathway is created that would allow the entire 92 m3 to enter the groundwater system instantaneously.” 3
4
Problem Definition No vadose zone, aquifer only
Uses known tank concentrations Instantaneously places 80% (not 100%) of the tank’s mass into only the aquifer’s effective pore space Uses tank’s total liquid volume to estimate the plan view area of contamination NOT an instantaneous release scenario, which requires mass balance checks on water and mass flux rates Mixes contamination over the aquifer depth (conservative?) Maximum Darcy velocity (noted as conservative) Advection, Decay, and Retardation Only (noted as conservative) No Dispersion (noted as conservative) 4
5
Fully Mixed With Dispersion Source Upper Aquitard Fully Mixed Plume
River Plume Upper Aquifer Unit Fully Mixed Fully Mixed Upper Aquitard Upper Aquifer Unit Plume Source River With Dispersion 5
6
6
7
Modules Source, Vadose Zone, and Aquifer Transport
FRAMES Constituent Database Selection Source (User-defined source term) – WFF Vadose Zone Module MEPAS 5.0 Aquifer Module MEPAS 5.0 River Module Exposure/Intake/Risk MEPAS 5.0 Exposure Pathways Module MEPAS 5.0 Receptor Intakes Module MEPAS 5.0 Health Impacts Module 7
8
Registering an Excel Worksheet
Model Input Registering an Excel Worksheet (separate presentation) 8
9
9
10
10
11
11
12
Constituent Database 12
13
“Source-Term” Module 13
14
Aquifer Module 14
15
River Module 15
16
Chronic Exposure Module
16
17
Intake Module Impacts Module 17
18
Output Results 18
19
Constituent Concentrations in Aquifer at River’s Edge
pCi/mL pCi/mL pCi/mL Years 19
20
Comments & Investigations
Modeling provides us with an opportunity to more fully understand the problem. SAR case ignores mass balance of water flux rate. Maximum Darcy Velocity is conservative – Reduce SZ Darcy Velocity one order of magnitude Fully mixed condition is conservative – Increase the aquifer depth 20
21
Check to see if a maximum saturated zone Darcy velocity is conservative:
Reduce the saturated zone Darcy velocity by an order of magnitude (i.e., 1/10th) 21
22
Reduced by 1/10th 22
23
Reduced by 1/10th 23
24
Reduced by 1/10th 24
25
Reduced by 1/10th 25
26
Constituent Concentrations in Aquifer at River’s Edge at 1/10th the Darcy Velocity
pCi/mL pCi/mL pCi/mL Years 26
27
Hierarchical Modeling Results
27
28
Check to see if fully mixed conditions in the aquifer is conservative:
Increase the aquifer thickness. This case was not run, but the modeling can provide insight on how aquifer depth can impact the conservative assumption. 28
29
Rule-of-Thumb Relationships
29
30
Rule-of-Thumb Relationship Definitions
30
31
Summary Many important factors determine whether scenarios and assumptions are conservative Interdependencies between parameters Duration of release Time of concentration Water mass balance Contaminant mass balance 31
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.