1. Day 1 Sritrusta Sukaridhoto

2. UTP 5e cable/patch

3. Straight-through

4. Crossed-over

5. Tools

6. Step-by-step (1) Skin off the jacket Un-twist each pair Place the order Recheck use diagram

7. Step-by-step (2) Hold the grouped Cut straight all of the wires

8. Step-by-step (3) Insert the wires into connector (pin facing up)

9. Step-by-step (4) Push moderately hard to assure that all of the wires have reached the end of the connector

10. Step-by-step (5) Place the connector into crimp tool, and squeeze hard so that the handle reaches it’s full swing

11. Step-by-step (6) Now go and test it !

12. Wire map

13. Cisco Cable system

14. X21

15. V35

16. RS232

17. Connecting Router to ISP (WAN)

18. Console Cable Plug it into console port

19. Plug Console Cable Serial Cable into Computer at Serial Port UTP Cable into Console Port at Router

20. Plug the FO

21. Prepare the FO Cable Plug it into Router and Switch

22. Dial-UP

23. Plug Modem into PC using Serial Cable Plug RJ11 Cable into modem and PABX Use Adaptor as AC-power

24. How-to Dial UP Use Gnome-ppp (Linux), Dialup networking (Windows) Username : goodle Password : goodle Number to dial : 101

25. Wireless-LAN

26. Turn-on WIFI Get ESSID : “eepishotspot” Get IP Access Internet