©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 1 Ch 19 Flexible Manufacturing Systems Sections: 1.What is a Flexible Manufacturing System? 2.FMS Components 3.FMS Applications and Benefits 4.FMS Planning and Implementation Issues 5.Quantitative Analysis of Flexible Manufacturing Systems

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 2 Where to Apply FMS Technology  The plant presently either:  Produces parts in batches or  Uses manned GT cells and management wants to automate the cells  It must be possible to group a portion of the parts made in the plant into part families  The part similarities allow them to be processed on the FMS workstations  Parts and products are in the mid-volume, mid-variety production range

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 3 Flexible Manufacturing System - Defined “A highly automated GT machine cell, consisting of a group of processing stations (usually CNC machine tools), interconnected by an automated material handling and storage system, and controlled by an integrated computer system”  The FMS relies on the principles of GT  No manufacturing system can produce an unlimited range of products  An FMS is capable of producing a single part family or a limited range of part families

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 4 Flexible Manufacturing System - Defined FMS is the most automated and technologically sophisticated of the GT cells. FMS requires a significant capital investment. FMS is capable of producing a variety of different part styles simultaneously at various workstations, and the mix of part styles and quantities of production can be adjusted in response to changing demand patterns.

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 5 Flexibility  The ability to identify and distinguish among the different incoming part or product styles processed by the system  Quick changeover of operating instructions  Quick changeover of physical setup

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 6 Flexibility Tests in an Automated Manufacturing System flexible To qualify as being flexible, a manufacturing system should satisfy the following criteria (“yes” answer for each question): 1.Can it process different part styles in a non ‑ batch mode? 2.Can it accept changes in production schedule? 3.Can it respond gracefully to equipment malfunctions and breakdowns? 4.Can it accommodate introduction of new part designs?

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 7 Automated manufacturing cell with two machine tools and robot. Is it a flexible cell? Automated Manufacturing Cell

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 8 Is the Robotic Work Cell Flexible? 1.Part variety test  Can it machine different part configurations in a mix rather than in batches? 2.Schedule change test  Can production schedule and part mix be changed?

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 9 Is the Robotic Work Cell Flexible? 3.Error recovery test  Can it operate if one machine breaks down?  Example: while repairs are being made on the broken machine, can its work be temporarily reassigned to the other machine? 4.New part test  As new part designs are developed, can NC part programs be written off ‑ line and then downloaded to the system for execution?

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 10 Types of FMS  Kinds of operations:  Processing vs. assembly  Type of processing  If machining, rotational vs. non-rotational  Number of machines (workstations): 1.Single machine cell (n = 1) 2.Flexible manufacturing cell (n = 2 or 3) 3.Flexible manufacturing system (n = 4 or more)

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 11 Single-Machine Manufacturing Cell

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 12 A single-machine CNC machining cell (photo courtesy of Cincinnati Milacron)

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 13 Flexible Manufacturing Cell

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 14 A two-machine flexible manufacturing cell for machining (photo courtesy of Cincinnati Milacron)

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 15 A five-machine flexible manufacturing system for machining (photo courtesy of Cincinnati Milacron)

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 16 Features of the Three Categories

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 17 FMS Types Level of Flexibility 1.Dedicated FMS  Designed to produce a limited variety of part styles  The complete universe of parts to be made on the system is known in advance  Part family likely based on product commonality rather than geometric similarity 2.Random-order FMS  Appropriate for large part families  New part designs and engineering changes will be introduced  Production schedule is subject to daily changes

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 18 Dedicated vs. Random-Order FMSs

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 19 FMS Components 1.Workstations 2.Material handling and storage system 3.Computer control system 4.Human labor

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 20 Workstations  Load and unload station(s)  Factory interface with FMS  Manual or automated  Includes communication interface with worker to specify parts to load, fixtures needed, etc.  CNC machine tools in a machining type system  CNC machining centers  Milling machine modules  Turning modules  Assembly machines

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 21 Material Handling and Storage  Functions:  Random, independent movement of parts between stations  Capability to handle a variety of part styles  Standard pallet fixture base  Workholding fixture can be adapted  Temporary storage  Convenient access for loading and unloading  Compatibility with computer control

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 22 Material Handling Equipment  Primary handling system establishes basic FMS layout and moves parts between stations  Secondary handling system – Functions:  Transfers work from primary handling system to workstations  Position and locate part with sufficient accuracy and repeatability for the operation  Reorient part to present correct surface for processing  Buffer storage to maximize machine utilization

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 23 Five Types of FMS Layouts  The layout of the FMS is established by the material handling system  Five basic types of FMS layouts 1.In ‑ line 2.Loop 3.Ladder 4.Open field 5.Robot ‑ centered cell

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 24 FMS In-Line Layout  Straight line flow, well-defined processing sequence similar for all work units  Work flow is from left to right through the same workstations  No secondary handling system

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 25 FMS In-Line Layout  Linear transfer system with secondary parts handling system at each workstation to facilitate flow in two directions

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 26 FMS Loop Layout  One direction flow, but variations in processing sequence possible for different part types  Secondary handling system at each workstation

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 27 FMS Rectangular Layout  Rectangular layout allows recirculation of pallets back to the first station in the sequence after unloading at the final station

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 28 FMS Ladder Layout  Loop with rungs to allow greater variation in processing sequence

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 29 FMS Open Field Layout  Multiple loops and ladders, suitable for large part families

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 30 Robot-Centered Cell  Suited to the handling of rotational parts and turning operations

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 31 FMS Computer Functions 1.Workstation control  Individual stations require controls, usually computerized 2.Distribution of control instructions to workstations  Central intelligence required to coordinate processing at individual stations 3.Production control  Product mix, machine scheduling, and other planning functions

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 32 FMS Computer Functions 4.Traffic control  Management of the primary handling system to move parts between workstations 5.Shuttle control  Coordination of secondary handling system with primary handling system 6.Workpiece monitoring  Monitoring the status of each part in the system

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 33 FMS Computer Functions 7.Tool control  Tool location  Keeping track of each tool in the system  Tool life monitoring  Monitoring usage of each cutting tool and determining when to replace worn tools 8.Performance monitoring and reporting  Availability, utilization, production piece counts, etc. 9.Diagnostics  Diagnose malfunction causes and recommend repairs

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 34 Duties Performed by Human Labor  Loading and unloading parts from the system  Changing and setting cutting tools  Maintenance and repair of equipment  NC part programming  Programming and operating the computer system  Overall management of the system

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 35 FMS Applications  Machining – most common application of FMS technology  Assembly  Inspection  Sheet metal processing (punching, shearing, bending, and forming)  Forging

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 36 FMS at Chance-Vought Aircraft (courtesy of Cincinnati Milacron)

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 37 FMS for Sheet Metal Fabrication

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 38 FMS Benefits  Increased machine utilization  Reasons:  24 hour operation likely to justify investment  Automatic tool changing  Automatic pallet changing at stations  Queues of parts at stations to maximize utilization  Dynamic scheduling of production to account for changes in demand  Fewer machines required  Reduction in factory floor space required

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 39 FMS Benefits  Greater responsiveness to change  Reduced inventory requirements  Different parts produced continuously rather than in batches  Lower manufacturing lead times  Reduced labor requirements  Higher productivity  Opportunity for unattended production  Machines run overnight ("lights out operation")

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 40 FMS Planning and Design Issues  Part family considerations  Defining the part family of families to be processed  Based on part similarity  Based on product commonality  Processing requirements  Determine types of processing equipment required  Physical characteristics of workparts  Size and weight determine size of processing equipment and material handling equipment

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 41 FMS Planning and Design Issues  Production volume  Annual quantities determined number of machines required  Types of workstations  Variations in process routings  Work-in-process and storage capacity  Tooling  Pallet fixtures

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 42 FMS Operational Issues  Scheduling and dispatching  Launching parts into the system at appropriate times  Machine loading  Deciding what operations and associated tooling at each workstation  Part routing  Selecting routes to be followed by each part

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 43 FMS Operational Issues  Part grouping  Which parts should be on the system at one time  Tool management  When to change tools  Pallet and fixture allocation  Limits on fixture types may limit part types that can be processed

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 44 Quantitative Analysis of Flexible Manufacturing Systems  FMS analysis techniques: 1.Deterministic models 2.Queueing models 3.Discrete event simulation 4.Other approaches, including heuristics  Deterministic models 1.Bottleneck model - estimates of production rate, utilization, and other measures for a given product mix 2.Extended bottleneck model - adds work-in-process feature to basic model

Bottleneck Model  Part mix p j : the fraction of the total system output that is of style j, j=1,2,...,P (P: total number of different part styles)  Workstation and servers s i : the number of servers (parallel/identical machines) at workstation i, i=1,2,...,n (n: total number of workstations) Load/unload stations are included. ©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 45

Bottleneck Model  Process routing t ijk : the processing time (i: station, j: part/product, k: sequence of operations in the process routing)  Work handling system s n+1 : number of carriers in the FMS handling system (n+1: material handling system)  Transport time t n+1 : the mean transport time required to move a part from one workstation to the next station in the process routing (a constant average for all stations) ©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 46

Bottleneck Model  Operation frequency: defined as the expected number of times a given operation in the process routing is performed for each work unit f ijk : operation frequency for operation k in process plan j at station i ©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 47

FMS Operational Parameters Average workload for a given workstation is defined as the mean total time spent at the station per part. The average number of transports The workload of the handling system ©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 48

System Performance Measures  Production rate of all parts  Production rate of each part style  Utilization of the different workstations  Number of busy servers at each workstation ©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 49

System Performance Measures The workload per server Let WL* and s* equal the workload and number of servers, respectively, for the bottleneck station. Maximum production rate of all part styles produced by the system, determined by the capacity of the bottleneck station (pc/min) Maximum production rate of part style j ©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 50

System Performance Measures The mean utilization of each workstation is the proportion of time that the servers at the station are working and not idle The utilization of the bottleneck station is 100% at. An unweighted average of the workstation utilizations ©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 51

System Performance Measures Overall FMS utilization (weighted) Number of busy servers on average at station i ©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 52

Example 19.5 Part jPart mix p j Operation kDescriptionStation iProcess time t ijk A0.41Load14 2Mill230 3Drill310 4Unload12 B0.61Load14 2Mill240 3Drill315 4Unload12 ©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 53 s 2 =2, s n+1 =4, t n+1 =3 min, f ijk =1  i,j,k

Example 19.6 jpjpj kDescriptionit ijk f ijk A0.11Load141.0 2Mill2201.0 3Drill3151.0 4Inspect4120.5 5Unload121.0 B0.21Load141.0 2Drill3161.0 3Mill2251.0 4Drill3141.0 5Inspect4150.2 6Unload121.0 s 1 =1, s 2 =3, s 3 =2, s 4 =1, s 5 =2, t 5 =3.5 min jpjpj kDescriptionit ijk f ijk C0.31Load141.0 2Drill3231.0 3Inspect480.5 4Unload121.0 D0.41Load141.0 2Mill2301.0 3Inspect4120.333 4Unload121.0 ©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 54

Sizing the FMS Number of servers required at station i to achieve a specified production rate R p ©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 55

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 56 What the Equations Tell Us  For a given part mix, the total production rate is ultimately limited by the bottleneck station  If part mix ratios can be relaxed, it may be possible to increase total FMS production rate by increasing the utilization of non- bottleneck stations  As a first approximation, bottleneck model can be used to estimate the number of servers of each type to achieve a specified overall production rate

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 57 What the Equations Tell Us  The number of parts in the FMS at any one time should be greater than the number of servers (processing machines) in the system  Ratio of two parts per server is probably optimum  Parts must be distributed throughout the FMS, especially in front of the bottleneck station  If WIP is too low, production rate is impaired  If WIP is too high, MLT increases

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.

Similar presentations

Presentation on theme: "©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist."— Presentation transcript:

Similar presentations

About project

Feedback

Log in

Auth with social network:

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.

Similar presentations

Presentation on theme: "©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist."— Presentation transcript:

Similar presentations

About project

Feedback