1. For Beginners

2.  Network architecture, is the logical and structural layout of the network consisting of transmission equipment, software and communication protocols and infrastructure (wired or wireless) transmission of data and connectivity between components.

3.  Client-server architecture (client/server) is a network architecture in which each computer or process on the network is either a client or a server. Servers are powerful computers or processes dedicated to managing disk drives (file servers), printers (print servers), or network traffic (network serv ers ). Clients are PCs or workstations on which users run applications. Clients rely on servers for resources, such as files, devices, and even processing power.network architecturecomputerclientserverServersdedicateddisk drivesfile serversprintersprint serverstrafficnetworkserv ers PCsworkstationsapplications resourcesfilesdevices

4.  A type of network in which each workstation ha s equivalent capabilities and responsibilities. Pee r-to-peer networks are generally simpler, but they usually do not offer the same performance under heavy loads.networkworkstationloads

5. o Star network o Bus or line network o Loop or ring network o Mesh network.

6. In local area networks with a star topology, each network host is connected to a central hub with a point-to-point connection. In Star topology every node (computer workstation or any other peripheral) is connected to a central node called hub or switch.

7. In local area networks where bus topology is used, each node is connected to a single cable. Each computer or server is connected to the single bus cable. A signal from the source travels in both directions to all machines connected on the bus cable until it finds the intended recipient.

8. A network topology that is set up in a circular fashion in which data travels around the ring in one direction and each device on the ring acts as a repeater to keep the signal strong as it travels. Each device incorporates a receiver for the incoming signal and a transmitter to send the data on to the next device in the ring.

9. The value of fully meshed networks is proportional to the exponent of the number of subscribers, assuming that communicating groups of any two endpoints, up to and including all the endpoints. Fully Or Partially