1. 200 pt 300 pt 400 pt 500 pt 100 pt 200 pt 300 pt 400 pt 500 pt 100 pt 200pt 300 pt 400 pt 500 pt 100 pt 200 pt 300 pt 400 pt 500 pt 100 pt 200 pt 300 pt 400 pt 500 pt 100 pt Arc WelderMiter SawCold SawGeneral Oxy- acetylene

2. Arc Welder Device with a clamp that completes electrical current for welding.

3. Arc Welder What is Ground Cable?

4. Arc Welder The proper welding lens to protect your eyes

5. Arc Welder What is a shade 10 lens?

6. Arc Welder A device used to position and electrify the welding rod.

7. Arc Welder What is Electrode Holder?

8. Arc Welder Adjustment that increases or decreases the power of electrical current.

9. Arc Welder What is the Amperage Control?

10. Arc Welder Coating over the metal rod used in the welding process.

11. Arc Welder What is flux?

12. Miter Saw Hold wood for maximum safety.

13. Miter Saw What is keep hands and fingers away from yellow zone?

14. Miter Saw Place wood flat on the saw and flush against the back.

15. Miter Saw How should wood be positioned?

16. Miter Saw To insure an accurate cut, align the blade to the mark properly.

17. Miter Saw What is leave the line?

18. Miter Saw Use the proper hand placement when cutting.

19. Miter Saw What is left hand holding the board and right hand on the saw?

20. Miter Saw The main purpose or advantage using of a miter saw.

21. Miter Saw What is cutting angles and bevels.

22. Cold Saw The proper blade speed for cutting mild steel.

23. Cold Saw What is the low speed setting?

24. Cold Saw To prevent cutting the vice jaws.

25. Cold Saw What is pre-adjust the jaws so they are close to the blade but not touching?

26. Cold Saw Keep metal from vibrating and moving while cutting.

27. Cold Saw What is keep the vice jaws closed tightly?

28. Cold Saw Prevention of dulling the blade and increase cutting efficiency.

29. Cold Saw What is make sure fluid is flowing before cutting?

30. Cold Saw The proper flow rate of cutting fluid

31. Cold Saw What is fluid dripping steadily off the rear of the blade?

32. General The best item of protective shop clothing.

33. General What is coveralls?

34. General Long pants and long sleeve shirt (or coveralls), leather shoes or boots with socks.

35. General What is proper shop clothes?

36. General Use when loud noises are present.

37. General What is wear proper ear protection/ear muffs?

38. General Treat others as you want to be treated while working in shop.

39. General What is consider safety for others?

40. General Be responsible for what you purchase or bring to the shop.

41. General What is use the right tool for the job?

42. Oxyacetylene Device used to contain and store oxygen and acetylene.

43. Oxyacetylene What is a cylinder?

44. Oxyacetylene Color of hose which acetylene travels through.

45. Oxyacetylene What is red?

46. Oxyacetylene The pattern used when gas welding.

47. Oxyacetylene What is a circular motion?

48. Oxyacetylene Used to check for leaks on the oxy- acetylene connections.

49. Oxyacetylene What is soapy water?

50. Oxyacetylene Proper pressure setting for oxygen while cutting.

51. Oxyacetylene What is 40 psi.

52. Final Jeopardy Category: General Safety

53. Final Jeopardy Answer: Name and describe the three classes of fires.