1. NASA Technical Standards Working Group Presentation to White Sands Test Facility Dr. George Alcorn Goddard Space Flight Center GSFC

2. October 15, 2003 2 Proposals Evaluated By GSFC  JPL-2003-1 Handbook for Spacecraft Structural Dynamics Testing  JPL-2003-2 Specifications for Composite Materials  JPL-2003-3 A Materials Specification for EA9360 and EA9361 Adhesives  JPL-2003-4 A Shelf Life Control Specification  JPL-2003-5 Updating of NASA-STD-7002 “Payload Test Requirements”  JPL-2003-6 Improved Spacecraft Charging Handbook  JPL-2003-7 Nondestructive Evaluation of Composite Materials Using Ultrasonic  JPL-2003-9 Nondestructive Evaluation of Fiber Reinforced Plastic Composites Using Radiography

3. October 15, 2003 3 Proposals Evaluated By GSFC  JPL-2003-10 Design Methodology for Space Inflatable/Rigidizable Structures  JPL-2003-11 Nondestructive Evaluation of Composite Materials  JPL-2003-12 Nondestructive Evaluation of Composite Materials Using Ultrasonic  JPL-2003-13 Nondestructive of Fiber Reinforced Plastic Composites Using Radiography  JPL-2003-14 Design Methodology Handbook for Space Inflatable/Ridigizable Structures (Resubmit of JPL-2003-10 based on comments from Richard Foss of LaRC)  JSC-2003-1 Revision of NASA-STD-3000, “Man-Systems Integration Standards” (MSIS)

4. October 15, 2003 4 Proposals Evaluated By GSFC  JSC-2003-2 Definition of Standards for MicroElectroMechanical Systems (MEMS)  MSFC-2003-1 NASA Standard for Charged Particle Radiation Testing of Materials to emulate Space Environment Exposure  MSFC-2003-3 Metallic Material Properties Development and Standardization (MMPDS) Steering Group  MSFC-2003-4 AWS D17.1:2001 “Specification for Fusion Welding for Aerospace Applications  MSFC-2003-5 AWS D17.3:2001 “Friction Stir Welding  MSFC-2003-6 MSFC-SPEC-766 “Fusion Welding Titanium and Titanium Alloys”  MSFC-2003-7 MFSC-SPEC-560A “Fusion Welding of Steels, Corrosion and Heat Resistant Alloys”

5. October 15, 2003 5  MFSC-2003-8 MFSC-SPEC-504C “Welding, Aluminum Alloys”  MFSC-2003-9 Composite Materials Handbook (Military Handbook 17)  MFSC-2003-10 Structural Requirement Criteria for Rocket Engines  MFSC-2003-11 Nondestructive Evaluation (NDE) Implementation Handbook for Fracture Control Programs  MFSC-2003-12 High Energy Corona Discharge Design Handbook  MFSC-2003-13 LEO Spacecraft Charging Design Handbook  MFSC-2003-14 Flammability, Odor, Offgassing, and Compatibility Requirements and Test Procedures for Materials In Environments that Support Combustion  MSFC-2003-15 NASA Configuration Management (CM) Standard Proposals Evaluated By GSFC

6. October 15, 2003 6  The ISO 9000 process at GSFC is based on two types of documents. PG’S are executed inside the directorate primarily at the Branch level. -GPG --Goddard Procedures and Guidelines (higher level document) - PG --Procedures and Guidelines (lower level document)  The PG's for code 500 (AETD) are used as documents which define our Quality process. Method for Improving Implementation of ISO 9000 Through Technical Standards Standards Activities

7. October 15, 2003 7  The PG’s listed are required to be updated every 4 to 5 years. The standards are constantly being updated.  The standards were registered in SUNS and all updates will be sent to the PG owners as the updates are available.  A look at the impact of the new tech standard was performed. The first pass was by George Alcorn. If it was believed that improvement in the PG’s (improving reliability, cost, operational performance ect), without over riding the negatives could be obtained, then work to change the PG’s with the assistance of PG owners was performed.  The improvement (update) of technical standards when incorporated in PG’s can yield procedural and process improvements. Standards Activities

8. October 15, 2003 8 Standards Activities  Status of GPS Testing Standard  The ITAR review is continuing.  Further review by other NASA centers and GSFC GPS experts continue.  The next release will be early October.  There will be no future funding required.

9. October 15, 2003 9 Reviewed Documents With Comments Since January 2003  ISO Documents  ISO/WD 23041- Space systems - Unmanned Spacecraft operational procedures Documentation  ISO/CD 23038 - Space Systems - Space Solar Cells – Electron and portion irradiation test methods  ISO/CD 14620-3(E) - Space Systems - Safety requirements - Part 3: Flight Safety System  ISO/DIS 15864 - Unmanned Spacecraft Design, performance and quality assessment - General test methods for system, subsystem and unit level  ISO/CD 22010 - Space Systems - Mass Properties Control

10. October 15, 2003 10 Reviewed Documents With Comments Since January 2003  Action Item 02-181 - NASA-STD-P036, NASA Fastener Integrity (Draft 1)  Finished review of our Acquisition Standards

11. October 15, 2003 11 Standards Review Board  Review of Standards for the month of October  ISO/FDIS 14623 Pressure Vessels and Pressurized Structures - Design and Operation  ISO/CD 16454.9 Space System - Structural Design - Stress Analysis Requirements  ISO/FDIS 14619 Space Systems - Space Experiments – General Requirements  ISO/CD 14625 Space Systems - Ground Support Equipment For Use at Launch, Landing, or Retrieval Sites - General Requirements Ballot  ISO/CD 15389 DAM Space Systems - Flight-to-ground umbilical - Amendment 1: Add Annex A: Prevention of accidental cross – connection  ISO/FDIS 16458 (E) Space Systems - Unmanned Spacecraft Transportation - General Requirements