Download presentation
Presentation is loading. Please wait.
Published bySharleen Simpson Modified over 9 years ago
1
Chapter 6 - Concurrent Processes Ivy Tech State College Northwest Region 01 CIS106 Microcomputer Operating Systems Gina Rue CIS Faculty
2
See Illustration p.1252 Introduction - Concurrent Processes Multiprocessing systems have more than one CPUMultiprocessing systems have more than one CPU –problems that occur in single processor systems apply to multi-processes in general single processor with 2 or more processessingle processor with 2 or more processes more than one processor with multiprocessesmore than one processor with multiprocesses
3
3 What Is Parallel Processing? –Parallel Processing, also called multiprocessing, where two or more processors operate in unison –Two or more CPUs are executing instructions simultaneously –Each CPU can have a process in the RUNNING state at the same time –Process Manager has to coordinate the activity of each processor, as well as synchronize the interaction among the CPUs
4
4 What Is Parallel Processing? –Synchronization is the key to the system’s success because many things can go wrong in a multiprocessing system –The system won’t work unless every processor communicates & cooperates with every other processor –Since mid-1980s, costs of CPU hardware declined, has increased multiprocessors used in business environment today
5
5 What Is Parallel Processing? –Two major forces behind multiprocessing development enhance throughputenhance throughput increase computing powerincrease computing power –Two primary benefits increased reliabilityincreased reliability faster processingfaster processing
6
6 Typical Multiprocessing Configurations Much depends on how multiple processors are configured. Three typical configurations are: –master/slave –loosely coupled –symmetric
7
See Fig. 6.1 p.1287 Master/Slave Configuration Single-processor (master) with additional (slave) processorsSingle-processor (master) with additional (slave) processors –master processor manages entire system –well suited for front-end users (interactive) & back-end users (batch) –advantage is simplicity –disadvantages reliability is no higher than single processorreliability is no higher than single processor can lead to poor use of resourcescan lead to poor use of resources increase # of interrupts, slave/masterincrease # of interrupts, slave/master
8
See Fig. 6.2 p.1288 Loosely Coupled Configuration Several complete computer systems, each with its own memory, I/O devices, CPU, & OSSeveral complete computer systems, each with its own memory, I/O devices, CPU, & OS –each processor controls its own resources –each processor can communicate & cooperate with the others –job scheduling for new jobs may be assigned to processor with lightest load or best combination of output devices –if one processor fails, others can continue to work independently, difficult to detect failed processor
9
See Fig. 6.3 p.1299 Symmetric Configuration Processor scheduling is decentralizedProcessor scheduling is decentralized Best implemented if the processors are all of the same typeBest implemented if the processors are all of the same type –four advantages over loosely coupled: more reliablemore reliable uses resources effectivelyuses resources effectively balances load wellbalances load well degraded gracefully in the event of system failuredegraded gracefully in the event of system failure
10
10 Process Synchronization Software Success hinges on the capability of the OS to make resources unavailable to other processes while it’s being used by one of themSuccess hinges on the capability of the OS to make resources unavailable to other processes while it’s being used by one of them Used resources must be locked away from other processes until it is released - critical region allow a process to finishUsed resources must be locked away from other processes until it is released - critical region allow a process to finish A mistake could leave a job waiting indefinitelyA mistake could leave a job waiting indefinitely
11
11 Test-And-Set single indivisible machine instruction known as “TS”single indivisible machine instruction known as “TS” introduced by IBM for System 360/370 computersintroduced by IBM for System 360/370 computers In a machine cycle it tests if the key is available/unavailableIn a machine cycle it tests if the key is available/unavailable single bit in a storage location that can contain a zero (free) or one (busy)single bit in a storage location that can contain a zero (free) or one (busy)
12
12 Test-And-Set Simple to implement & works well for a small # of processesSimple to implement & works well for a small # of processes two drawbacks:two drawbacks: starvation can occur when many processes are waiting to enter critical regionstarvation can occur when many processes are waiting to enter critical region busy waiting-the waiting processes remain in unproductive, resource- consuming wait loopsbusy waiting-the waiting processes remain in unproductive, resource- consuming wait loops
13
13 WAIT and SIGNAL Modification of “TS” designed to remove busy waitingModification of “TS” designed to remove busy waiting Two operations are mutually exclusive:Two operations are mutually exclusive: WAIT activated when the process encounters a busy condition codeWAIT activated when the process encounters a busy condition code SIGNAL activated when the process exits the critical region, condition code is set to “free”SIGNAL activated when the process exits the critical region, condition code is set to “free”
14
See Table 6.1 p.13314 Semaphores A nonnegative integer variable that’s used as a flagA nonnegative integer variable that’s used as a flag signals if and when a resource is free & can be used to processsignals if and when a resource is free & can be used to process Dijkstra (1965) introduced two operations to overcome process synchronization problemsDijkstra (1965) introduced two operations to overcome process synchronization problems P - proberen (to test)P - proberen (to test) V - verhogen (to increment)V - verhogen (to increment)
15
15 Semaphores P & V are executed by the OS in response called issued by any one process naming a semaphore as parameterP & V are executed by the OS in response called issued by any one process naming a semaphore as parameter Traditional name for semaphore is mutex - Mutual ExclusionTraditional name for semaphore is mutex - Mutual Exclusion necessary to avoid two operations attempt to execute at the same timenecessary to avoid two operations attempt to execute at the same time
16
16 Semaphores Sequential computations, mutex is achieved automatically because each operation is handled in order, one at a timeSequential computations, mutex is achieved automatically because each operation is handled in order, one at a time Parallel computations, order of execution can change, so mutex must be explicitly stated & maintainedParallel computations, order of execution can change, so mutex must be explicitly stated & maintained
17
17 Process Cooperation Several processes work together to complete a common task, two examples: producers and consumersproducers and consumers readers and writersreaders and writers Each requires both mutual exclusion and synchronization, they are implemented by using semaphores
18
See Fig. 6.5 p.13518 Producers and Consumers Classic problem: One process produces data that another process consumes laterOne process produces data that another process consumes later It can also be expanded to several pairs of producers and consumersIt can also be expanded to several pairs of producers and consumers Can be extended to buffers that hold records or data where process-to-process communication is requiredCan be extended to buffers that hold records or data where process-to-process communication is required
19
19 Readers and Writers Classic problem: Two processes need to access a shared resource such as a file or databaseTwo processes need to access a shared resource such as a file or database Combination priority policy used to prevent starvationCombination priority policy used to prevent starvation Readers must call two procedures:Readers must call two procedures: –checks whether the resources can be immediately granted for reading –checks to see if there are any writers waiting
20
20 Concurrent Programming Multiprocessing can also refer to one job using several processors to execute sets of instructions in parallel –requires a programming language –requires a system to this type
21
See Table 6.2 p.13821 Applications of Concurrent Programming Monoprogramming languages instructions are executed one at a timeinstructions are executed one at a time sufficient for most computational purposessufficient for most computational purposes –easy to implement –fast enough for most users
22
22 Applications of Concurrent Programming By using a language that allows concurrent processing, arithmetic expressions can be processed differently COBEGINCOBEGIN COENDCOEND –indicate to a compiler which instructions can be processed concurrently
23
See Table 6.3 p.13823 Applications of Concurrent Programming When operations are performed at the same time, we increase computation speed, but also create complexity of the program language & hardware explicit parallelismexplicit parallelism –detects which instructions can be executed in parallel implicit parallelismimplicit parallelism –automatic detection by the compiler of instructions that can be performed in parallel
24
24 ADA - Agusta Ada Byron U.S. Department of Defense early 1970sU.S. Department of Defense early 1970s Designed original language for embedded computer systemsDesigned original language for embedded computer systems Ada - high-level programming language made available to public in 1980Ada - high-level programming language made available to public in 1980 –modules support “information hiding” –implement concurrent programming –design made it easy to verify correctness of a program
25
25 Ada - Modular Programming An Ada program would contain one or more program units that could be compiled separately and were composed of: –a specification part, which has all the information that must be visible to other units (the argument list) –a body part, made up of implementation details that don’t need to be visible to other units
26
26 Ada - Modular Programming Program units can fall into any one of three types: –subprograms which are executable algorithms –packages which are collections of entities, (procedures or functions) –tasks which are concurrent computations is the heart of the language’s parallel processing abilityis the heart of the language’s parallel processing ability key is synchronization of the taskskey is synchronization of the tasks
27
27 Ada - The wave of the future? Landmark language: –researchers find it helpful because of parallel processing power –modular design is appealing to application programmers and systems analysts –tasking capabilities appeal to designers of database systems & other applications that require parallel processing –some universities offer Ada courses majoring in computer systems
28
28 Summary Multiprocessing systems have two or more CPUs that must be synchronized by the Process ManagerMultiprocessing systems have two or more CPUs that must be synchronized by the Process Manager Each processor must communicate with the otherEach processor must communicate with the other Multiprocessor configurationsMultiprocessor configurations –master/slave –loosely coupled –symmetric
29
29 Summary Multiprocessing also occurs in single processor systems between interacting processes that obtain control of the CPU at different timesMultiprocessing also occurs in single processor systems between interacting processes that obtain control of the CPU at different times Success depends on the ability of the system to synchronize the processors or processes & the system’s other resourcesSuccess depends on the ability of the system to synchronize the processors or processes & the system’s other resources
30
30 Summary Mutual exclusion helps keep the processes having allocated resources from becoming deadlockedMutual exclusion helps keep the processes having allocated resources from becoming deadlocked –test-and-set –WAIT and SIGNAL –semaphores (P - proberen,V – verhogen, and mutex)
31
31 Summary Hardware & Software are used to synchronize processesHardware & Software are used to synchronize processes Synchronization problemsSynchronization problems –missed waiting customers –synchronization of producers & consumers –mutual exclusion of readers & writers
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.