Presentation is loading. Please wait.

Presentation is loading. Please wait.

Requirements for PCE Applied in OTN Networks draft-zhang-pce-reqs-for-otn-00.txt Fei Zhang Feng Gao Yuanlin Bao ZTE Corporation.

Similar presentations


Presentation on theme: "Requirements for PCE Applied in OTN Networks draft-zhang-pce-reqs-for-otn-00.txt Fei Zhang Feng Gao Yuanlin Bao ZTE Corporation."— Presentation transcript:

1 Requirements for PCE Applied in OTN Networks draft-zhang-pce-reqs-for-otn-00.txt Fei Zhang Feng Gao Yuanlin Bao ZTE Corporation

2 PCEP Requirements for OTN The optical LSP in OTN is sensitive to optical impairments especially for high peed services, e.g. 40G/100G Additional information needs to be provided in PCEP when PCE is used: FEC (forwarding Error Coding) Modulation format BER (Bit Error Ratio)

3 Scenario1: PCC specifies modulation/FEC (1)Client1 requests a 40G eth service to Client2 over OTN transport network (2)Node A (PCC) sends PCReq to PCE, specifying a Pre-FEC BER value (3) PCE returns the calculate d results to PCC, including the actual BER value Pre-FEC BER value consists of: required BER value (determined by modulation/rate) Margin for optical impairments (PMD/OSNR/NLPS) Margin for future use

4 Scenario2: PCE determines modulation/FEC (1) Client1 requests a 40G eth service to Client2 over OTN transport network (2) Node A sends PCReq to PCE (3) PCE determines signals modulation/FEC of every opaque node along the path, and the BER value of the LSP PCRep should contain these parameters Modulation format FEC BER

5 Next Steps Refine it according to the feedback from meeting or mailing list Comments are always appreciated


Download ppt "Requirements for PCE Applied in OTN Networks draft-zhang-pce-reqs-for-otn-00.txt Fei Zhang Feng Gao Yuanlin Bao ZTE Corporation."

Similar presentations


Ads by Google