1. Power Gear Rolling Case Name: Ephel Jules Advisor: Dr. Antonio Soares EET4950 -001 - 2148: TECH DESIGN PROJECT PROPOSAL Date: December 08, 2014

2. Outline Introduction – Why Task – my main objective Equipment– explain each component Specification Design Implication Flow Block Chart Total Coast Reference Question

3. Introduction In many cases, when traveling; you will find yourself low on power to your probable device with no plug near by. Or in many case, people will use the plug to charge their phone and you be left out Or when traveling to your next destination, you may have trouble carrying out a signal when making a call on the phone or getting on the internet. My Idea for this project was to use a workcase and create probable voltage generator to power up any probable device such as a phone, a tablet, an ipod or mp3; into a usb voltage output. With the option to use internet and make calls Also create a way where is easier to carry your luggage when traveling to the an airport or to a bus station.

4. Task My goal for this project is to design a suitcase that has a combination of battery charger and use a DC Servo Motor as a voltage generator that will be attach to a voltage output that create power. Add a Arduino GSM shield that will allow the user to to call, text, and connect to the internet over the GSM network Use a Gyroscope, as a sensor to active the servo when tilt; will be sending a signal to Arduino and then telling the servo motor turn on. Also a charge controller will be implement to charge a battery to a USB adapter as the output. Add a voice receiver, for voice recognition which be moving handle up and down on its own. Reliable to the user. More convenient New and better way of traveling

5. Equipment A Rolling Case (2) Dc Servo Motor Gyroscope ( Gyro Sensor ) bq24650 Battery Charge Controller USB Adapter Arduino Uno ( Micro Controller) Arduino GSM Shield Voice Recognition System: module ES6928P

6. Equipment Detail VEX IQ Gyro sensor: Voice Recognition module ES6928P Bq24650 Battery Charge Controller:

7. Equipment Detail continue Arduino Uno:Arduino GSM Sheild: AC, DC & Servo Motors TINKERKIT SERVO:

8. Specification Motion will trigger the Tilt sensor minimum angle: 20 degrees The rollingcase will be voice controlled, which will be use for handle. On/Off switch Maximum weight: 20 pounds Speed controlled base on position Increasing Power to the motors is up to the incline of the rolling case.

9. Design Implication

10. Block Flow Diagram

11. Total Coast A Rolling Case: be provided (2) Dc Servo Motor: $ 15 Gyroscope ( Gyro Sensor ): $30 bq24650 Battery Charge Controller: $50 USB Adapter: will be provided Arduino Uno ( Micro Controller): $15 Arduino GSM Shield: $90 Voice Recognition System: module ES6928P: $23

12. Time Line Novemb er/ Decemb er Meet with advisor. What can be change and improve. January Gather Parts & cost analysis. February Design & Built March Troubleshooti ng April Present

13. Reference http://arduino.cc/en/Guide/Introduction http://playground.arduino.cc/Main/AdafruitMotorShield http://www.instructables.com/id/How-To-Use-The-Talking- ES6928P-Voice-Recognition-S/ http://www.outbackpower.com/outback-products/charge- controllers/item/flexmax-6080?category_id=438 http://www.outbackpower.com/outback-products/charge- controllers/item/flexmax-6080?category_id=438 http://www.vexrobotics.com/228-3014.html http://www.mouser.com/search/Refine.aspx?Keyword=11836 2466&Ns=Pricing%7c0&FS=True&Ntk=P_MarCom

14. Questions