Presentation is loading. Please wait.

Presentation is loading. Please wait.

Laundering and Restoration of Reusable Surgical Barrier Textiles Steven J. Tinker Director, Research & Development Gurtler Industries, Inc.

Similar presentations


Presentation on theme: "Laundering and Restoration of Reusable Surgical Barrier Textiles Steven J. Tinker Director, Research & Development Gurtler Industries, Inc."— Presentation transcript:

1 Laundering and Restoration of Reusable Surgical Barrier Textiles Steven J. Tinker Director, Research & Development Gurtler Industries, Inc.

2 Reusable Surgical Textiles Barrier Surgical Gowns and Drapes - Fluid Resistant Textiles Barrier Surgical Gowns and Drapes - Fluid Resistant Textiles  Protect health care workers from blood and bodily fluids  Provide comfort and allow for sterilization  Several degrees of protection available

3 Fabric Technology Muslin Muslin  Traditional reusable OR fabric Poly/Cotton Blend Poly/Cotton Blend  Repellent finishes Polyester Microfiber Technology Polyester Microfiber Technology  Continuous filament threads  Tightly woven  Repellent finishes

4 Reusable Surgical Textiles Muslin Muslin

5 Reusable Surgical Textiles Cotton/polyester blends Cotton/polyester blends

6 Reusable Surgical Textiles 100% polyester ‘microfiber’ 100% polyester ‘microfiber’

7 Reusable Surgical Textiles Laminated fabrics – Gore-Tex ® Laminated fabrics – Gore-Tex ®

8 Reusable Surgical Textiles

9 Microfiber Technology Microfiber Technology Continuous filaments vs. staple fibers Continuous filaments vs. staple fibers  Significantly lower linting potential

10 Fluid Repellent Finishes Polyester is “naturally” hydrophobic Polyester is “naturally” hydrophobic  But highly oleophilic Fluoropolymers Fluoropolymers  Water and oil repellent  Mill applied, cured

11 Environmental Issues Reusable Surgical Textiles can reduce medical waste significantly Reusable Surgical Textiles can reduce medical waste significantly  One garment can replace 150-200 disposable gowns  Considerable medical waste incineration or landfill impact  Significant cost savings can be achieved

12 Environmental Issues AHA & EPA agreement: Hospitals for a Healthy Environment AHA & EPA agreement: Hospitals for a Healthy Environment  Goals: Reduce the overall volume of hospital waste (both regulated and non-regulated waste) by  33 percent by 2005 and  50 percent by 2010  See www.h2e.org

13 Regulatory Issues Surgical gowns, drapes wraps and towels are “Class II Medical Devices” as defined by FDA Surgical gowns, drapes wraps and towels are “Class II Medical Devices” as defined by FDA Commercial laundries that reprocess surgical textiles may need to register with FDA Commercial laundries that reprocess surgical textiles may need to register with FDA Reporting Requirements – Reporting Requirements –  Strike-through  Complaint handling

14 Standard Laundry Process Time Time  30-45 minutes Temperature Temperature  160-180°F Mechanical Action Mechanical Action  Rated Capacity of Washer Chemical Action Chemical Action  pH 11.0-11.5  Surface Active Agents

15

16 Reusable Care Concerns Low absorptivity Low absorptivity  Laminated fabrics: Impervious to fluid transmission  Barriers reduce chemical transmission through fabric  Reduced soil removal efficacy

17 Reusable Care Concerns Polyester - affinity to oily soils Polyester - affinity to oily soils  Recommended temperature between 140-160°F  Use nonionic detergents – more difficult to rinse

18 Reusable Care Concerns Rinsing of detergent is key to barrier performance Rinsing of detergent is key to barrier performance  Any residual detergent will affect barrier performance negatively  Must add extra rinsing time and steps  No fabric softeners or anti-static agents can be used

19 Reusable Care Concerns Polyester - Alkaline hydrolysis potential Polyester - Alkaline hydrolysis potential  Reduce the amount of alkali, reduce pH to <10.5  Keep temperature <180°F

20 Soil Characteristics Blood Soils Blood Soils  Low temperature flushes to reduce “setting”  Enzyme detergent in prewash zone of tunnels

21 Soil Characteristics Oily Soils – Body Oils or Mineral Oils Oily Soils – Body Oils or Mineral Oils  Polyester has a high affinity for these soils  High surfactant detergents with oily soil emulsification properties  Cloud point of detergent 100-120°F  High phosphate detergents work better  Solvent-based detergent additives can help

22 Soil Characteristics Tape Residue Tape Residue  Use special tape with water/alkali soluble adhesive  Very difficult – if the wrong tape is used  Solvent detergent re-washes, high temperature reclaim process

23 Reusable Care Concerns Fluoropolymer finishes: Can be removed with harsh laundering processes Fluoropolymer finishes: Can be removed with harsh laundering processes  Reduce alkali  Avoid use of oxalic acid  Avoid some harsh solvents

24 Barrier Fabric Process Increased Time Increased Time  45-60 minutes Reduced Temperature Reduced Temperature  140-160°F Increase Mechanical Action Increase Mechanical Action  65-75% of rated capacity Change Chemical Ratios Change Chemical Ratios  More detergent, less alkali

25

26 Drying Process Achieve “bone-dry” state Achieve “bone-dry” state  Dry at 170-200°F  Maintain maximum temperature for 3-5 minutes  Cool-down to 100°F

27 Reusable Protection Suter test - Hydrostatic resistance Suter test - Hydrostatic resistance  AATCC 127-1985 Oil and water repellency tests Oil and water repellency tests  AATCC 118-1992 Resistance of Protective Clothing Materials to penetration by blood or bloodborne pathogens Resistance of Protective Clothing Materials to penetration by blood or bloodborne pathogens  ASTM F1670-95  ASTM F2671-95

28 Repellency Performance Oil Repellency is a major issue in surgical protective barrier materials Oil Repellency is a major issue in surgical protective barrier materials  Suter test doesn’t reflect oil repellency performance  Oil stains can cause concern with health care personnel

29

30 Barrier Rejuvenation Modified fluoropolymers can be added in the final rinse cycle Modified fluoropolymers can be added in the final rinse cycle  Use rate of 2-6 oz/cwt  Cost of 2-4 cents per garment  Good drying is critical “Maintenance” application of polymer can extend life beyond 150-200 uses “Maintenance” application of polymer can extend life beyond 150-200 uses

31 Reference ANSI/AAMI ST65:2000 – ANSI/AAMI ST65:2000 – Processing of reusable surgical textiles for use in health care facilities ANSI/AAMI PB70:2003 – ANSI/AAMI PB70:2003 – Liquid barrier performance and classification of protective apparel and drapes in health care facilities.

32 Additional Sources ARTA - American Reusable Textile Association ARTA - American Reusable Textile Association  www.arta1.com www.arta1.com TRSA – Textile Rental Services Association TRSA – Textile Rental Services Association  www.trsa.org www.trsa.org

33 Laundering and Restoration of Reusable Surgical Barrier Textiles Steven J. Tinker sjtinker@gurtler.com


Download ppt "Laundering and Restoration of Reusable Surgical Barrier Textiles Steven J. Tinker Director, Research & Development Gurtler Industries, Inc."

Similar presentations


Ads by Google