Presentation is loading. Please wait.

Presentation is loading. Please wait.

IEEE CCW 08 New Network Architectures: Why Bother? Paul Francis Cornell.

Similar presentations


Presentation on theme: "IEEE CCW 08 New Network Architectures: Why Bother? Paul Francis Cornell."— Presentation transcript:

1 IEEE CCW 08 New Network Architectures: Why Bother? Paul Francis Cornell

2 What is a home run in systems research? Huge impact on industry Intellectually compelling idea Something that industry wouldnt have done on its own

3 Impact Intellectual Not done by Industry A home run

4 What is a home run in systems research? Huge impact on industry Intellectually compelling idea Something that industry wouldnt have done on its own As industry matures, these get increasingly difficult

5 Impact Intellectual Not done by Industry This is new architecture (clean slate) research

6 Dirty slate research.... Maybe. But only with incrementally deployable ideas. Is it possible to hit a home run in networking research these days? Finding a fun project that industry wants to deploy is itself an intellectual challenge....

7 One approach is to become a vendor The challenge of impact in network research: Need buy-in from providers, vendors, and standards Do a startup But this is not always possible Inter-domain routing, for instance

8 One Bottleneck at a Time Rather, solve the current most serious problem, move on Our approach to inter-domain routing research Dont solve every problem at once

9 Virtual Aggregation (ViAggre) In fact, ViAggre requires no changes to router software! ISPs sometimes have to replace hardware because of FIB growth Shrinks the BGP FIB (by easily 10x), but leaves the RIB intact Intact RIB means no real change to how routing is done

10 Today: All router FIBs have routes to all destinations DestNext Hop 20.5/161.1.1.1 36.3/162.1.1.1..

11 Virtual Aggregation: FIBs have routes to only part of the address space Virtual Prefixes DestNext Hop 20.5/161.1.1.1.. Dest Next Hop 188.3/16 2.1.1.1..

12 Paths through the ISP have two components: 1: Route to a nearby Aggregation Point 2: Tunnel to the neighbor router

13 1: Routing to a nearby Aggregation Point Configure Aggregation Point with static route for the Virtual Prefix Virtual Prefix is advertised into BGP

14 2: Tunnel packet to neighbor router (MPLS) Static routes for all neighbors are imported into OSPF MPLS LDP creates tunnels to every neighbor router

15 Turns out, providers are nervous about doing anything without vendor blessing We thought we could bypass vendors and standards Providers could deploy this on their own Fortunately, a vendor (Huawei) became interested in this

16 Huawei is implementing it Standardizing ViAggre in IETF (IDR) Going well, because no changes to BGP With RFC in hand, can try to get providers to convince other vendors to implement

17 I suspect that it is not RIB size, but rather BGP update processing cost Assuming FIB is solved, whats the next bottleneck? We are starting some router measurements to find out Can we reduce the cost of updates while running BGP more-or-less as is?

18 Mapped-BGP Filtering, best-path selection, load- balance, aggregation, route policies Expense of route processing are all the policies Our goal is to get rid of the policies for most prefixes

19 Rather than distribute routes to all prefixes, distribute routes to tunnel endpoints, and distribute maps that bind prefixes to tunnel endpoints Make the maps policy-free Exploit tunnels to improve inter-AS load balance and increase aggregation opportunities


Download ppt "IEEE CCW 08 New Network Architectures: Why Bother? Paul Francis Cornell."

Similar presentations


Ads by Google