1. Champion CS Deivanayagam Center for Biophysical Sciences and Engineering University of Alabama at Birmingham Birmingham, AL 35294-4400 Enzyme Kinetics Lectures 1 and 2 August 21 st 2009

2.  What are enzymes, and what do they do?  What characteristic features define enzymes?  Can the rate of an enzyme-catalyzed reaction be defined in a mathematical way?  What equations define the kinetics of enzyme-catalyzed reactions?  What can be learned from the inhibition of enzyme activity?  What is the kinetic behavior of enzymes catalyzing bimolecular reactions?  How can enzymes be so specific?  Are all enzymes proteins?  Is it possible to design an enzyme to catalyze any desired reaction?

3. What are you supposed to know from the lecture: (for your exam ) 1.Definitions of : A.An Enzyme (catalytic power, specificity and regulation) B.Co-enzyme, co-factors, holoenzyme, apoenzyme C.Active site 2.How do enzymes affect the thermodynamics of a reaction ? 3.Understanding the Michaelis-Menten constants (Km, Vmax) 4.Define turn-over rate 5.Define catalytic efficiency 6.What are single and double displacement reactions ? 7.The lock and key as well as induced fit hypothesis as related to the specificity of enzymes

4. Virtually All Reactions in Cells Are Mediated by Enzymes Enzymes catalyze thermodynamically favorable reactions, causing them to proceed at extraordinarily rapid rates Enzymes provide cells with the ability to exert kinetic control over thermodynamic potentiality Living systems use enzymes to accelerate and control the rates of vitally important biochemical reactions Enzymes are the agents of metabolic function

5. Reaction profile showing the large free energy of activation for glucose oxidation. Enzymes lower ΔG ‡, thereby accelerating rate.

6. What Characteristic Features Define Enzymes? Catalytic power is defined as the ratio of the enzyme- catalyzed rate of a reaction to the uncatalyzed rate Specificity is the term used to define the selectivity of enzymes for their substrates Regulation of enzyme activity ensures that the rate of metabolic reactions is appropriate to cellular requirements Enzyme nomenclature provides a systematic way of naming metabolic reactions Coenzymes and cofactors are nonprotein components essential to enzyme activity.

7. The ratio of the Enzyme-catalyzed rate of reaction to the uncatalyzed rate Enzymes can accelerate reactions as much as 10 16 over uncatalyzed rates Urease is a good example: O || H 2 N –C-NH 2 + 2H 2 O + H +  2NH 4 + + HHCO 3 - Catalyzed rate: 3x10 4 /sec Uncatalyzed rate: 3x10 -10 /sec Ratio is 1x10 14 Catalytic power

8. Specificity Enzymes selectively recognize proper substrates over other molecules Enzymes produce products in very high yields - often much greater than 95% Specificity is controlled by structure - the unique fit of substrate with enzyme controls the selectivity for substrate and the product yield

9. Regulation Regulation of enzyme activity is essential to the integration and regulation of metabolism. Availability of substrates and co-factors determines how fast the reaction goes Genetic regulation of enzyme synthesis and decay determines the amount of enzyme present at any moment.

10. Enzyme Nomenclature Provides a Systematic Way of Naming Metabolic Reactions Suffix –ase added to the substrate is the traditional way of naming enzymes Examples: Phosphotase, protease. Outliers: Trypsin, pepsin, catalase International commission on Enzymes Six classes of reactions (Oxidoreductases, Transferases, Hydrolases, Lyases, Isomerases, Ligases). Each class has subclasses Depending on the type of reactions

12. Coenzymes and Cofactors are Nonprotein components essential to Enzyme Activity Co-factors: are generally metal ions Co-Enzymes: Vitamins, NAD, TPP, FAD Tightly bound co-enzymes are referred to as ‘Prosthetic groups’ of the enzyme, and such a combination is called a ‘Haloenzyme’ and in the absence of the co-enzyme the protein is referred to as ‘Apo-enzyme’

13. Can the Rate of an Enzyme-Catalyzed Reaction Be Defined in a Mathematical Way? Kinetics is the branch of science concerned with the rates of reactions Enzyme kinetics seeks to determine the maximum reaction velocity that enzymes can attain and binding affinities for substrates and inhibitors Analysis of enzyme rates yields insights into enzyme mechanisms and metabolic pathways This information can be exploited to control and manipulate the course of metabolic events

14. Several kinetics terms to understand rate or velocity rate constant rate law order of a reaction molecularity of a reaction

15. Exploring Enzyme Kinetics Consider a reaction of overall stoichiometry as shown: The rate is proportional to the concentration of A

16. Enzyme Kinetics The simple elementary reaction of A→P is a first-order reaction Figure shows the course of a first-order reaction as a function of time. This is a unimolecular reaction For a bimolecular reaction, the rate law is: v = k[A][B] Kinetics cannot prove a reaction mechanism Kinetics can only rule out various alternative hypotheses because they don’t fit the data The half-time, t 1/2 is the time for one-half of the starting amount of A to disappear

17. Catalysts Lower the Free Energy of Activation for a Reaction A typical enzyme-catalyzed reaction must pass through a transition state The transition state sits at the apex of the energy profile in the energy diagram The reaction rate is proportional to the concentration of reactant molecules with the transition-state energy This energy barrier is known as the free energy of activation Decreasing ΔG ‡ increases the reaction rate The activation energy is related to the rate constant by: Understand the difference between  G and  G ‡ The overall free energy change for a reaction is related to the equilibrium constant The free energy of activation for a reaction is related to the rate constant It is extremely important to appreciate this distinction

18. What Equations Define the Kinetics of Enzyme-Catalyzed Reactions? Simple first-order reactions display a plot of the reaction rate as a function of reactant concentration that is a straight line Enzyme-catalyzed reactions are more complicated At low concentrations of the enzyme substrate, the rate is proportional to S, as in a first-order reaction At higher concentrations of substrate, the enzyme reaction approaches zero- order kinetics This behavior is a saturation effect

19. [ES] Remains Constant Through Much of the Enzyme Reaction Time Course in Michaelis-Menten Kinetics Time course for a typical enzyme-catalyzed reaction obeying the Michaelis-Menten, Briggs-Haldane models for enzyme kinetics. The early state of the time course is shown in greater magnification in the bottom graph. d[ES]/dt = 0 defines a steady state

20. The Michaelis-Menten Equation is the Fundamental Equation of Enzyme Kinetics Louis Michaelis and Maud Menten's theory The second step defines the formation of the product P K m = (k -1 + k 2 )/k 1 K m is the Michaelis constant E + S  ES k1k1 k -1 k -1 [ES] = k 1 [E][S] K s = k -1 / k 1 = [E][S]/[ES] K s – enzyme:substrate dissociation constant E + S  ES  E + P k1k1 k -1 k2k2 E T = E + ES

21. E T = E + ES or alternatively E = E T -ES At steady state d[ES]/dt = 0 then, V f = V d then v f = k 1 ([E T ] – [ES]) [S) Rate of formation v d = (k -1 + k 2 )[ES] Rate of disappearance k 1 ([E T ] – [ES]) [S] / [ES] = (k -1 + k 2 )/k 1 = K m or alternatively [ES] = [E T ] [S]/ K m + [S] E + S  ES  E + P k1k1 k -1 k2k2 Assume that the ES complex is in rapid equilibrium with free enzyme Product formation: v = d[P]/dt = k 2 [ES] k -1 [ES] = k 1 [E][S] v= k 2 [E T ] [S] / K m + [S] At saturation [ES] complex is equal to the total enzyme concentration E T, then [S] >> [ET] (and Km), [ET] = [ES] and therefore v = V max = k 2 [E T ] = V max [S] / K m + [S] -Michealis-Menton Equation When [S] = K m, then V = V max / 2

22. Understanding K m The "kinetic activator constant" K m is a constant K m is a constant derived from rate constants K m is, under true Michaelis-Menten conditions, an estimate of the dissociation constant of E from S Small K m means tight binding; high K m means weak binding

23. The K m values for some enzymes and their substrates

24. Understanding V max The theoretical maximal velocity V max is a constant V max is the theoretical maximal rate of the reaction - but it is NEVER achieved in reality To reach V max would require that ALL enzyme molecules are tightly bound with substrate V max is asymptotically approached as substrate is increased

25. The dual nature of the Michaelis-Menten equation Combination of 0-order and 1st-order kinetics When S is low, the equation for rate is 1st order in S When S is high, the equation for rate is 0-order in S The Michaelis-Menten equation describes a rectangular hyperbolic dependence of v on S

26. The Turnover Number Defines the Activity of One Enzyme Molecule A measure of catalytic activity k cat, the turnover number, is the number of substrate molecules converted to product per enzyme molecule per unit of time, when E is saturated with substrate. If the M-M model fits, k 2 = k cat = V max /E t Values of k cat range from less than 1/sec to many millions per sec

27. The Ratio k cat /K m Defines the Catalytic Efficiency of an Enzyme The catalytic efficiency: k cat /K m An estimate of "how perfect" the enzyme is k cat /K m is an apparent second-order rate constant It measures how the enzyme performs when S is low The upper limit for k cat /K m is the diffusion limit - the rate at which E and S diffuse together

28. Linear Plots Can Be Derived from the Michaelis-Menten Equation derive these equations Lineweaver-Burk: Begin with v = V max [S]/(K m + [S]) and take the reciprocal of both sides Rearrange to obtain the Lineweaver-Burk equation: A plot of 1/v versus 1/[S] should yield a straight line

29. Hanes-Woolf: Begin with Lineweaver-Burk and divide both sides by [S] to obtain: Hanes-Woolf is best - why? Because Hanes-Woolf has smaller and more consistent errors across the plot

30. Enzymatic Activity is Strongly Influenced by pH Enzyme-substrate recognition and catalysis are greatly dependent on pH Enzymes have a variety of ionizable side chains that determine its secondary and tertiary structure and also affect events in the active site Substrate may also have ionizable groups Enzymes are usually active only over a limited range of pH The effects of pH may be due to effects on K m or V max or both

31. The Response of Enzymatic Activity to Temperature is Complex Rates of enzyme-catalyzed reactions generally increase with increasing temperature However, at temperatures above 50° to 60° C, enzymes typically show a decline in activity Two effects here: – Enzyme rate typically doubles in rate for ever 10°C as long as the enzyme is stable and active – At higher temperatures, the protein becomes unstable and denaturation occurs

32. What Can Be Learned from the Inhibition of Enzyme Activity? Enzymes may be inhibited reversibly or irreversibly Reversible inhibitors may bind at the active site or at some other site Enzymes may also be inhibited in an irreversible manner Penicillin is an irreversible suicide inhibitor

33. Competitive Inhibitors Compete With Substrate for the Same Site on the Enzyme Lineweaver-Burk plot of competitive inhibition, showing lines for no I, [I], and 2[I]. The Vmax is unaffected, but the Km’s are affected by the inhibitor.

34. Pure Noncompetitive Inhibition – where S and I bind to different sites on the enzyme Lineweaver-Burk plot of pure noncompetitive inhibition. Note that I does not alter K m but that it decreases V max.

35. Mixed Noncompetitive Inhibition: binding of I by E influences binding of S by E Lineweaver-Burk plot of mixed noncompetitive inhibition. Note that both intercepts and the slope change in the presence of I.

36. Uncompetitive Inhibition, where I combines only with E, but not with ES Lineweaver-Burk plot of uncompetitive inhibition. Note that both intercepts change but the slope (K m /V max ) remains constant in the presence of I.

37. What Is the Kinetic Behavior of Enzymes Catalyzing Bimolecular Reactions? Enzymes often catalyze reactions involving two (or more) substrates Reactions may be sequential or single-displacement reactions These can be of two distinct classes: Random, where either substrate may bind first, followed by the other substrate Ordered, where a leading substrate binds first, followed by the other substrate

38. Kinetic Behavior of Enzymes Catalyzing Bimolecular Reactions? Single-deplacement bisubstrate mechanism. E + A + B  AEB  PEQ  E + P + Q

39. Conversion of AEB to PEQ is the Rate-Limiting Step in Random, Single- Displacement Reactions In this type of sequential reaction, all possible binary enzyme-substrate and enzyme- product complexes are formed rapidly and reversibly when enzyme is added to a reaction mixture containing A, B, P, and Q.

40. Creatine Kinase Acts by a Random, Single-Displacement Mechanism The overall direction of the reaction will be determined by the relative concentrations of ATP, ADP, Cr, and CrP and the equilibrium constant for the reaction. The structures of creatine and creatine phosphate, guanidinium compounds that are important in muscle energy metabolism.

41. In an Ordered, Single-Displacement Reaction, the Leading Substrate Must Bind First The leading substrate (A) binds first, followed by B. Reaction between A and B occurs in the ternary complex and is usually followed by an ordered release of the products, P and Q.

42. The Double Displacement (Ping-Pong) Reaction Double-Displacement (Ping-Pong) reactions proceed via formation of a covalently modified enzyme intermediate. Reactions conforming to this kinetic pattern are characterized by the fact that the product of the enzyme’s reaction with A (called P in the above scheme) is released prior to reaction of the enzyme with the second substrate, B.

43. The Double Displacement (Ping-Pong) Reaction Double-displacement (ping-pong) bisubstrate mechanisms are characterized by parallel lines.

44. Glutamate:aspartate Aminotransferase An enzyme conforming to a double-displacement bisubstrate mechanism.

45. How Can Enzymes Be So Specific? The “Lock and key” hypothesis was the first explanation for specificity The “Induced fit” hypothesis provides a more accurate description of specificity Induced fit favors formation of the transition-state Specificity and reactivity are often linked. In the hexokinase reaction, binding of glucose in the active site induces a conformational change in the enzyme that causes the two domains of hexokinase to close around the substrate, creating the catalytic site A drawing, roughly to scale, of H 2 O, glycerol, glucose, and an idealized hexokinase molecule. Binding of glucose in the active site induces a conformational change in the enzyme that causes the two domains of hexokinase to close around the substrate, creating the catalytic site.

46. Are All Enzymes Proteins? Ribozymes - segments of RNA that display enzyme activity in the absence of protein – Examples: RNase P and peptidyl transferase Abzymes - antibodies raised to bind the transition state of a reaction of interest

47. Is It Possible to Design An Enzyme to Catalyze Any Desired Reaction? A known enzyme can be “engineered” by in vitro mutagenesis, replacing active site residues with new ones that might catalyze a desired reaction Another approach attempts to design a totally new protein with the desired structure and activity – This latter approach often begins with studies “in silico” – i.e., computer modeling – Protein folding and stability issues make this approach more difficult – And the cellular environment may provide complications not apparent in the computer modeling