Download presentation
Presentation is loading. Please wait.
Published byMarilyn Thomas Modified over 9 years ago
1
Chapter 10: Transmission Efficiency Business Data Communications, 4e
2
Transmission Efficiency: Multiplexing Several data sources share a common transmission medium simultaneously Line sharing saves transmission costs Higher data rates mean more cost- effective transmissions Takes advantage of the fact that most individual data sources require relatively low data rates
3
Multiplexing Diagram
4
Alternate Approaches to Terminal Support Direct point-to-point links Multidrop line Multiplexer Integrated MUX function in host
5
Direct Point-to-Point
6
Multidrop Line
7
Multiplexer
8
Integrated MUX in Host
9
Frequency Division Multiplexing Requires analog signaling & transmission Total bandwidth = sum of input bandwidths + guardbands Modulates signals so that each occupies a different frequency band Standard for radio broadcasting, analog telephone network, and television (broadcast, cable, & satellite)
10
Frequency Division Multiplexing FDM
11
CATVChannelFrequencyAllocation
12
FDM Example: ADSL ADSL uses frequency-division modulation (FDM) to exploit the 1-MHz capacity of twisted pair. There are three elements of the ADSL strategy Reserve lowest 25 kHz for voice, known as POTS Use echo cancellation or FDM to allocate a small upstream band and a larger downstream band Use FDM within the upstream and downstream bands, using “ discrete multitone ”
13
FDM In ADSL
14
Discrete Multitone (DMT) Uses multiple carrier signals at different frequencies, sending some of the bits on each channel. Transmission band (upstream or downstream) is divided into a number of 4-kHz subchannels. Modem sends out test signals on each subchannel to determine the signal to noise ratio (SNR); it then assigns more bits to better quality channels and fewer bits to poorer quality channels.
16
Time-Division Multiplexing (TDM) The division of a transmission facility into two or more channels by allotting the common channel to several information channels, one at a time. Synchronous TDM (or TDM) Time slots are assigned to devices on a fixed, predetermined basis. Statistical TDM (Asynchronous TDM, Intelligent TDM ) Time slots are assigned to devices on demand.
17
TDM
18
Synchronous Time-Division Multiplexing (TDM) Used in digital transmission Requires data rate of the medium to exceed data rate of signals to be transmitted Signals “ take turns ” over medium Slices of data are organized into frames Used in the modern digital telephone system US, Canada, Japan: DS-0, DS-1 (T-1), DS-3 (T-3),... Europe, elsewhere: E-1, E3, …
19
Synchronous TDM
20
TDM Frames and Channels 12N12N … Frame Channel (Time Slot)
21
Digital Carrier Systems
22
DS-1 Transmission Format
23
T-1 Facilities T-1 carrier: One of carrier systems supported by AT&T and other companies Data rate: 1.544 Mbps Support DS-1 multiplex format Applications Private voice networks Private data network Video teleconferencing High-speed digital facsimile Internet access
24
SONET/SDH SONET (Synchronous Optical Network) is an optical transmission interface proposed by BellCore and standardized by ANSI. Synchronous Digital Hierarchy (SDH), a compatible version, has been published by ITU-T Specifications for taking advantage of the high-speed digital transmission capability of optical fiber.
25
SONET/SDH Signal Hierarchy
26
STS-1 and STM-N Frames STM-N
27
SONET STS-1 Frame Structure
29
Statistical Time Division Multiplexing “ Intelligent ” TDM Data rate capacity required is well below the sum of connected capacity Digital only, because it requires more complex framing of data Widely used for remote communications with multiple terminals
30
STDM: Cable Modems Cable TV provider dedicates two channels, one for each direction. Channels are shared by subscribers, so some method for allocating capacity is needed\--typically statistical TDM
31
Cable Modem Scheme
32
Transmission Efficiency: Data Compression Reduces the size of data files to move more information with fewer bits Used for transmission and for storage Combines w/ multiplexing to increase efficiency Works on the principle of eliminating redundancy Codes are substituted for compressed portions of data Lossless: reconstituted data is identical to original (ZIP, GIF) Lossy: reconstituted data is only “ perceptually equivalent ” (JPEG, MPEG)
33
Run Length Encoding Replace long string of anything with flag, character, and count Used in GIF to compress long stretches of unchanged color, in fax transmissions to transmit blocks of white space
35
Run-Length Encoding Example
36
Huffman Encoding Length of each character code based on statistical frequency in text Tree-based dictionary of characters Encoding is the string of symbols on each branch followed. String Encoding TEA 10 00 010 SEA 011 00 010 TEN 10 00 110
37
Lempel-Ziv Encoding Used in V.42 bis, ZIP buffer strings at transmitter and receiver replace strings with pointer to location of previous occurrence algorithm creates a tree-based dictionary of character strings
38
Lempel-Ziv Example
39
http://www.data-compression.com/lempelziv.html Dictionary
40
Video Compression Requires high compression levels Three common standards used: M-JPEG ITU-T H.261 MPEG
41
MPEG Processing Steps Preliminary scaling and color conversion Color subsampling Discrete cosine transformation (DCT) Quantization Run-length encoding Huffman coding Interframe compression
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.