1. ABSTRACT:In spite of the significant progress in the design and modification of materials for specific applications like hydrogen storage, there are still problems to achieve the desired levels of storage. Many MOFs have been designed and have also been synthesized but they are still not suitable enough or can meet the DOE standards due to moisture sensitive nature and the possibility of stability under other operating parameters

2. Hydrogen as fuel Lower heating value 33.3 kWh/g= 123 MJ/kg ( 11.1kWh/g gasoline) 8 MJ/L where as for gasoline 32 MJ/L 2017 DOE target 5.5wt% = 40g/L volumetric capacity

3. wide range of Hydrogen storage materials metal hydrides complex hydrides chemical hydrides carbohydrates clathrates inorganic nanotutes organic materisls MOFs carbon materials Liquid density 70.8 kg/m 3 at NTP

4. Physisorption methods on board reversible hydrides (interstitial, covalent metal hydrides, amides and borohydrides off board regenerable hydrides ( hydrocarbons, ammonia borane, alane)

5. The highest 99.5 mg/g at 56 bar and 77 K 164 mg/g at 77K 70 bar (176mg /g highest reported so far) symbolic many metal framework of Zn(II), Cu(II) Mn(III), Cr(III),La(III )

6. Design and synthesis of metal organic frameworks for hydrogen storage In high boiling solvents like DMF, DEF (80-130 0 C) solvo-thermal, solubility solvent-ligand exchange kinetics, rate of crystallization carboxylic acids, hetero-cycles containing nitrogen

62. Where are we now? To meet DOE standards still a long way to go New MOF with large surface area, pore volume, open metal sites, embedded metal catalysts facilitating hydrogen spill over have to be designed.

63. ABSTRACT:In spite of the significant progress in the design and modification of materials for specific applications like hydrogen storage, there are still problems to achieve the desired levels of storage. Many MOFs have been designed and have also been synthesized but they are still not suitable enough or can meet the DOE standards due to moisture sensitive nature and the possibility of stability under other operating parameters