Presentation is loading. Please wait.

Presentation is loading. Please wait.

PH4019 Shatin Tsung Tsin Secondary School Project Holders: Fan Chun Kit (Felix) Hui Chun Kit (Gibson) Li Miu Yin (Winnie) Sze Kam Fung (Sam)

Similar presentations


Presentation on theme: "PH4019 Shatin Tsung Tsin Secondary School Project Holders: Fan Chun Kit (Felix) Hui Chun Kit (Gibson) Li Miu Yin (Winnie) Sze Kam Fung (Sam)"— Presentation transcript:

1 PH4019 Shatin Tsung Tsin Secondary School Project Holders: Fan Chun Kit (Felix) Hui Chun Kit (Gibson) Li Miu Yin (Winnie) Sze Kam Fung (Sam)

2 40 th Joint School Science Exhibition Competition Scientific solutions for the green revolution

3 Our problems -Problems we are facing now -Pollution -Global warming -Energy Crisis

4 Our target -Reduce the use of electricity by using -Auto lighting system -Air directing system -Solar-heating system

5 Auto lighting system Aims - Reduce extra lighting - Maintain a comfortable lighting environment

6 Auto lighting system Model

7 Auto lighting system Components 1.Sensors 2.Control Unit 3.LED Lighting - LED - Frame - LED Driver 4. Blinds and motor

8 Auto lighting system Sensors -Detect light intensity -Put at different positions

9 Auto lighting system The Control Unit - Implements negative feedback - Controls lighting

10 Auto lighting system LED Lighting - LED - Frame - LED Driver -High efficiency -No Heat Produced -No UV and infra red -Long lifespan

11 Auto lighting system Blinds - Control sunlight - Reduce heating effect Motor - Control the blinds

12 Auto lighting system Condition 1 The light intensity is too high  The lighting becomes dimmer Working principle

13 Auto lighting system Condition 2 The light intensity is too low  The lighting gets brighter

14 Auto lighting system Condition 3 The light intensity is extremely high  The motor will lower the blinds

15 Air directing system Aims - To maintain a comfortable temperature in an office - Save energy for air-conditioning

16 Air directing system Model

17 Air directing system Components 1.Sensors 2.Control Unit -Manual modulator 3.Fan 4.Deflectors 5.Motors 6.Paper strips

18 Air directing system Sensors Movement of the deflectors - Each sensor will control only half of the deflectors

19 Air directing system Control Unit - Negative Feedback ~used to maintain a comfortable temperature in an office - Manual modulator ~ allow people to adjust the set temperature as they want

20 Air directing system Fan, deflectors and motors -Fan and deflectors are installed in the air outlet

21 Air directing system Fan -Control the speed of the air flow Deflectors -Facilitate air flow -Control air flow in local areas Motors -used to swing the deflectors to an appropriate position

22 Air directing system Paper strips - use to show the direction of the air flow

23 Air directing system Working principle (T= Temperature sensed by one sensor, S= range of set temperature) Condition 1: T > Upper bound of S ~The deflectors will be swung to the position of the sensor by the motors

24 Air directing system Working principle (T= Temperature sensed by one sensor, S= range of set temperature) Condition 2: T < Lower bound of S ~The deflectors will be swung and closed

25 Air directing system Working principle (T= Temperature sensed by one sensor, S= range of set temperature) Condition 3: All T < Lower bound of S ~ the speed of fan will be decreased or even stopped Condition 4: All T> Upper bound of S ~ the speed of the fan will increase

26 Solar Pantry Aims - To reduce the use of electricity for heating water as much as possible - To implement a clean and renewable energy source

27 Solar Pantry Light source Solar Panel Model Rubber tubing Water tank Window

28 Solar Pantry Components 1.Solar Panel 2.Rubber tubing 3.Water tank 4.Temperature sensor

29 Solar Pantry Solar Panel - Use solar energy for heating - Dark surface - Fluid circulation assisted by convection

30 Solar Pantry Water tank - Double- layered - Inner layer Spiral shaped, Metal coated - Outer layer Water circulation

31 Solar Pantry Temperature sensor - Detect water temperature - If the temp of heated water detected < Set temp, conventional heating would be carried out - Else, cool water would be released

32 Solar Pantry Water in Light source Solar Panel Temp. sensor Rubber tubing Water tank (Heat exchange occurs) Heater Cool water Mixing tank

33 Solar Pantry Convection current Heated water Cooler water Water with desired temp

34  The End 


Download ppt "PH4019 Shatin Tsung Tsin Secondary School Project Holders: Fan Chun Kit (Felix) Hui Chun Kit (Gibson) Li Miu Yin (Winnie) Sze Kam Fung (Sam)"

Similar presentations


Ads by Google