Download presentation
Presentation is loading. Please wait.
Published byRachel Frost Modified over 11 years ago
1
1.033/1.57 Mechanics of Material Systems (Mechanics and Durability of Solids I) Franz-Josef Ulm Lecture: MWF1 // Recitation: F 3:00-4:30 1.033/1.57: Mechanics of Material Systems
2
Part IV: Plasticity and Yield Design 8. Plasticity Models
3
1.033/1.57: Mechanics of Material Systems Content 1.033/1.57 Part I. Deformation and Strain 1 Description of Finite Deformation 2 Infinitesimal Deformation Part II. Momentum Balance and Stresses 3 Momentum Balance 4 Stress States / Failure Criterion Part III. Elasticity and Elasticity Bounds 5 Thermoelasticity, 6 Variational Methods Part IV. Plasticity and Yield Design 7 1D-Plasticity – An Energy Approach 8 Plasticity Models 9 Limit Analysis and Yield Design
4
1D 1.033/1.57: Mechanics of Material Systems Stress Strain Plastic Strain Hardening Variable Hardening Force etc
5
1.033/1.57: Mechanics of Material Systems 1D 3D Extension Stress Strain Plastic Strain Hardening Variable Hardening Force Stress Tensor Strain Plastic Strain Tensor Hardening Variable Hardening Force
6
1.033/1.57: Mechanics of Material Systems Convexity of Elasticity Domain
7
1.033/1.57: Mechanics of Material Systems Example: Crystal Structure of Steel Impurity = defects in the crystal structure / network Overcome an Obstacle when? Slippage planes = Direction of permanent deformation how?
8
1.033/1.57: Mechanics of Material Systems Sliding in a Monocrystal (Kinematics) Elastic Plastic When ?How ?
9
1.033/1.57: Mechanics of Material Systems Stress Vector on Deviator Plane Orientation of hydrostatic axis
10
1.033/1.57: Mechanics of Material Systems Von-Mises Plasticity: Yield Criterion Principal Stress SpaceDeviator Plane
11
1.033/1.57: Mechanics of Material Systems Von-Mises Plasticity: Kinematics Shear Test During Plastic Loading After Unloading
12
1.033/1.57: Mechanics of Material Systems Drucker-Prager Plasticity: Yield Criterion
13
1.033/1.57: Mechanics of Material Systems Drucker-Prager Plasticity: Kinematics During Plastic Loading After Unloading Plastic Dilatation
14
1.033/1.57: Mechanics of Material Systems Drucker-Prager Plasticity: Thermodynamic Restrictions Thermodynamically Admissible Associated Plasticity Non-Associated Plasticity
15
1.033/1.57: Mechanics of Material Systems Plastic Hardening Models Isotropic HardeningKinematical Hardening
16
1.033/1.57: Mechanics of Material Systems Cam-Clay Model: Yield Criterion
17
1.033/1.57: Mechanics of Material Systems Cam-Clay Model: Kinematics
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.