1. DynaFAD DynaFAD Dynamic Foundation Analysis and Design Setford Consulting & Technology Ltd. Calgary, Canada 2012

2. DynaFAD Contents 1. Features 2. Procedures 3. Menus and Details

3. DynaFAD 1. Features

4. DynaFAD DynaFAD is a software for dynamic foundation analysis and design With DynaFAD, No manual work is required DynaFAD calculates foundation properties, CG, Eccentricity of Footing DynaFAD visual checks your input DynaFAD assists you to prepare the input of other software DynaFAD Can Read the output of other software, check industrial design criteria

5. DynaFAD 2. Procedures

6. DynaFAD Fill input (Setting, Blocks and Masses, Foundation, Soil, Loading, and Points) Visual-Check the input Export to the input file of other software Run other software Import output file of other software Check industrial design criteria

7. DynaFAD

8. 3. Menus

9. DynaFAD Menu - File

10. DynaFAD Open (existing file *.fad)

11. DynaFAD Save or Save As (for future use)

12. DynaFAD Menu -Input (Please save each page before you leave)

13. DynaFAD Unit can be changed automatically for all your input Setting

14. DynaFAD For Your Convenience Unit of Force (kN, or kips) not (N, or lb) Unit Weight of Material (kN/m 3, or kips/ft 3 ) not (N/m 3, or lb/ft 3 ) Unit for Pile Section Properties (mm, or in.) not (m, or ft) All units will be transferred to appropriate unit as required for input file

15. DynaFAD Blocks and Masses

16. DynaFAD Foundation

17. DynaFAD Input Pile Location by Grids

18. DynaFAD Soil (this page depends on Foundation page)

19. DynaFAD Numbering of Soil Layers For side Layers, numbering the layers from footing base up, the first layer is the lowest level For pile layered soil, numbering the layers from footing base down, the first layer is the top level.

20. DynaFAD Loading (Harmonic)

21. DynaFAD Loading (Transient)

22. DynaFAD Points

23. DynaFAD Menu - View (for input checking in XY, XZ, YZ Planes)

24. DynaFAD 3D View

25. DynaFAD Blocks (CG, Eccentricity)

26. DynaFAD XZ Plane

27. DynaFAD YZ Plane

28. DynaFAD Masses

29. DynaFAD Loading

30. DynaFAD Pile Layout

31. DynaFAD Soil Profile

32. DynaFAD Resultant Points

33. DynaFAD Menu – Tools (Help you for input)

34. DynaFAD UnBalanced Force (for quadratic only)

35. DynaFAD Section Properties for Piles

36. DynaFAD Vertical Transmissibility

37. DynaFAD Menu - Run

38. DynaFAD Export (to input file of others)

39. DynaFAD Internal Report for Foundation Properties

40. DynaFAD Time History (for Transient Load Only)

41. DynaFAD Menu – Post Processor

42. DynaFAD Import (the output file of others)

43. DynaFAD Graph of Amplitude (CG and Points)

44. DynaFAD Check Fig. 3.13 of ACI351.3R

45. DynaFAD Check Fig. 3.9 of ACI351.3R

46. DynaFAD Check Fig. 3.10 of ACI351.3R

47. DynaFAD Help

48. DynaFAD Tooltips