1. 14-1 Mappings and Functions

2. Transformational Geometry One branch of geometry, known as transformational geometry, investigates how one geometric figure can be transformed into another. In transformational geometry we are required to reflect, rotate, and change the size of the figures.

3. Mapping

4. Image and Preimage

5. Mappings and Functions Mapping  Geometry: Correspondence between a set of points. Function  Algebra: Correspondence between sets of numbers.

6. One-to-one A mapping (or a function) from set A to set B is called a one-to-one mapping (or function) if every member of B has exactly one preimage in A.

7. y = x 2 is not a one-to-one function 9 has two preimages, 3 and -3

8. Example 1 Function k maps every number to a number that is two less than one third of the number. –Express this fact using function notation –Find the image of 9 –Find the preimage of 16

9. Example 2 Mapping T maps each point (x,y) to the point (x+2, 3y) –Express this fact using mapping notation –Find P’ and Q’ the images of P(2,4) and Q(- 2,6) –Decide whether T maps M, the midpoint of PQ to M’ the midpoint of P’Q’. –Decide whether PQ = P’Q’

10. Transformation A one-to-one mapping from the whole plane to the whole plane. –Reflection –Translation –Glide Reflection –Rotation –Dilation

11. Isometry If a transformation maps every segment to a congruent segment “Preserves distance”

12. Theorem An isometry maps a triangle to a congruent triangle

13. Corollary An isometry maps an angle to a congruent angle

14. Corollary An isometry maps a polygon to a polygon with the same area.

15. Example 3 Mapping S maps each point (x,y) to and image point (x,-2y). Given A(-3,1) B(-1,3) C(4,1) and D(2,-1) –Decide whether S is an isometry

16. 14-2 Reflections

17. Reflection A reflection is another type of geometric transformation. A reflection is a mirror image that is created when a figure is flipped over a line.

18. Example: Reflection Image About Line m m m m

19. Line m is called the line of reflection We call A’ the reflection image of the point A Reflections A m A’

20. The dashed line shows that the points are images of each other under this transformation. Line m is perpendicular to the line segment AA’ and also bisects it. A m A’

21. We say A is reflected in line m to A’ To abbreviate this “reflection in line m” we write R m: A  A’ or R m: (A) = A’ A m A’

22. Theorem 14-2 A reflection in a line is an isometry

23. Isometry Preserves distance Preserves angle measure Preserves area of a polygon

24. Invariant Another way to say that the distance, angle measure and area are preserved when doing a reflection, is to say –Distance, angle measure and area are invariant under a reflection.

25. Triangle ABC has vertices A(2,4), B(0,6), and C(-2,2). Graph the figure and its reflected image over the x-axis. Then find the coordinates of the reflected image. B A C

26. B A C C’ A’ B’

27. Quadrilateral RSTV has vertices R(2,3), S(-1,5), T(-3,0), V(3,-4). Graph the figure and its reflected image over the y-axis. Then find coordinates of the reflected image.

28. Triangle ABC has the vertices A(-6,-1) B(-2,-1) C(-5,-6). Graph the figure and its reflected image over the line y=x. Then find coordinates of the reflected image.

30. White Board Practice 1.R m : stands for ?

31. White Board Practice 2. R k :A  ____ A CD B U S TX Y W k j

32. White Board Practice 3. R k (B) = ____ A CD B U S TX Y W k j

33. White Board Practice 4. R k AB  ____ A CD B U S TX Y W k j

34. White Board Practice 5. R k (C) = ____ A CD B U S TX Y W k j

35. White Board Practice 6. R k :T  = ____ A CD B U S TX Y W k j

36. White Board Practice 7. R k :BC  = ____ A CD B U S TX Y W k j

37. White Board Practice 8. R k :  STU  ____ A CD B U S TX Y W k j

38. White Board Practice 9. R j :(S) = ____ A CD B U S TX Y W k j

39. White Board Practice 10. R j :ST  = ____ A CD B U S TX Y W k j

40. White Board Practice 11. R j : ( ) =XY A CD B U S TX Y W k j

41. White Board Practice 12. R j : line k  ______ A CD B U S TX Y W k j

42. 14-3 Translations and Glide Reflections

43. Translation

44. A transformation glides all points of the plane the same distance in the same direction. A translation is a transformation that corresponds to physical sliding without turning.

45. A C B A’ C’ B’ Vectors

46. Coordinates You don’t need to know the coordinates, you just need to know that if one point slides up 5 and to the right 3, then all points slide up 5 and to the right 3

47. If a transformation is a translation then all arrows Must be parallel and the same length

48. Example 1 The translation T: (x,y)  (x+3, y-1) maps triangle ABC to triangle A’B’C’. A(3,-1), B(0,2), C(2,-3) (a)Graph triangle ABC and its image (b)Draw arrows connecting A to A’, B to B’, and C to C’ (c)Are the arrows the same length and parallel?

49. Example 2 If T: (2,2)  (-2,-2), then T: (4,4)  ( ?, ? )

50. Glide Reflection Glide reflection is a transformation where a translation is followed by a reflection in a line parallel to the direction of translation.translation reflection in a line The order of the two transformations (translation and reflection) is not important. You will get the same result by first reflecting and then translating the image.

51. Example 3 A glide reflection moves all points down 3 units and reflects all points in the x-axis. Find the image of A(2,-1), B(1,1) and C(3,3)

52. 14.4 Rotations

53. To avoid confusion R (Reflection) R P,45° (Rotation)

63. Theorem A rotation is an isomety

64. Special Rotations 360 180 390

65. 360 rotation Rotates any point P around to itself.

66. 180 A rotation about point O of 180 is called a half turn. A Halfturn about the origin can be written H o : (x,y)  (-x,-y)

67. Rotation of 390 ?? 360 + 30

68. Example 1 State another name for each rotation (a)R o,-270° (b)R o,180° (c)R o,450° (d)R o,135°

69. Example 2 The diagonals of square ABCD intersect at O. Complete each statement. (a)R o,-90° :B  (b)R o,-270°:C  (c)R o,180° :A  (d)R D,-90°:A 

70. Page 589 Classroom Exercises 1-11

71. 14.5 Dilations

72. Isometries Reflection Translation Glide reflection Rotation

73. Dilations A dilation is a transformation that changes the size but not the shape of an object or figure. Every dilation has a fixed point that is called the center of dilation.

74. So a dilations is related to….

75. D o,k O is the center of dilation k is the scale factor

76. If  k  >1, the dilation is called an expansion. –The shape will get bigger If  k  <1, the dilation is called an contraction. –The shape will get smaller

78. Dilations To dilate an object with a center of dilation of the origin only: 1) Graph object if necessary. 2) Multiply the coordinates of the object by the scale factor. 3) Graph new coordinates.

79. Example 1 D o,2

83. D 0,-1 Example 2 Your turn:

84. A negative scale factor Changes the direction of the dilation It will create opposite rays

85. To do a dilation with a center of dilation not at the origin Measure from the center of dilation to a point. Multiply that distance by the absolute value of the scale factor. Measure from the center of dilation to a new point with your new distance.

86. Remember…. If the scale factor is negative you would measure in the opposite direction.

87. Example 3 Find the image of WXYZ under D 0,1/2 X ZW Y O

88. Example 4 Find the image of  RST under D 0,3 O S RT

89. Theorem A dilation maps a triangle to a similar triangle

90. Corollary A dilation maps an angle to a Congruent angle

91. Corollary A dilation D 0,k maps any segment to a parallel segment  k  times as long.

92. Corollary A dilation D 0,k maps any polygon to a similar polygon whose area is k 2 times as large

93. 14.6 Composites of Mappings

94. Theorem The composite of two isometries is an isometry.

95. Theorem A composite of reflections in two parallel lines is a translation. The translation glides all points through twice the distance from the first line of reflection to the second.

96. Theorem A composite of reflections in two intersecting lines is a rotation about the point of intersection of the two lines. The measure of the angle of rotation is twice the measure of the angle from the first line of reflection to the second.

97. Corollary A composite of reflections in perpendicular lines is a half turn about the point where the lines intersect.

98. White Board Practice Page 602 # 3

99. 14-7 Inverses and the Identity

100. T: glides every runner one place to the right

101. T 2 : glides every runner two places to the right

102. T -1 : glides every runner one place to the left The inverse of T Written T -1

103. T -1 ° T:P  P Keeps all points fixed

104. Identity The mapping that maps every point to itself is called the identity transformation. I is the identity T ° I = T and I ° T = T

105. Inverse The inverse of a transformation T is defined as the transformation such that T -1 ° T = I or T ° T -1 = I

106. Example 1 The symbol 2 -1 stands for the inverse of 2 or ½. They multiple to be 1. Give the value of the following. a)3 -1 b)7 -1 c)(4/5) -1 d)(2 -1 ) -1

107. Example 2 Find the inverses of the following transformations. a)Reflection R x b)Translation T: (x,y)  (x-2, y+3) c)Rotation R o,a d)Dilation D o,3

108. Example 3 Which pairs of transformations are inverses? a)R o,180 and R o,-180 b)R o,270 and R o,-90 c)T: (x,y)  (x+1, y-2) and U: (x,y)  (x-2, y-1) d)R x ° R y and R y ° R x

109. 14.8 Symmetry in the Plane and in Space

110. Symmetry A figure in the plane has symmetry if there is an isometry, other than the identity that maps the figure to itself.

111. Line Symmetry

112. Here are some examples of common geometric figures and their lines of symmetry.

113. Line symmetry is really reflecting

114. Point Symmetry

117. is really half turns

118. Rotational Symmetry

120. Translational Symmetry

121. Glide reflection Symmetry