1. P22 - 1 Workshop: Using Visualization in Teaching Introductory E&M AAPT National Summer Meeting, Edmonton, Alberta, Canada. Organizers: John Belcher, Peter Dourmashkin, Carolann Koleci, Sahana Murthy

2. P22 - 2 Faraday’s Law Presentation Materials

3. P22 - 3 MIT Class: Faraday’s Law

4. P22 - Faraday’s Law Fourth (Final) Maxwell’s Equation Underpinning of Much Technology

5. P22 - 5 Demonstration: Falling Magnet

6. P22 - Magnet Falling Through a Ring Falling magnet slows as it approaches a copper ring which has been immersed in liquid nitrogen.

7. P22 - Demonstration: Jumping Rings

8. P22 - Jumping Ring An aluminum ring jumps into the air when the solenoid beneath it is energized

9. P22 - What is Going On? It looks as though the conducting loops have current in them (they behave like magnetic dipoles) even though they aren’t hooked up

10. P22 - Faraday’s Law Applets Discovery

11. P22 - Faraday’s Law Applets Discovery Activity

12. P22 - Demonstration: Induction

13. P22 - Electromagnetic Induction

14. P22 - Faraday’s Law of Induction A changing magnetic flux induces an EMF

15. P22 - What is EMF? Looks like potential. It’s a “driving force” for current

16. P22 - Faraday’s Law of Induction A changing magnetic flux induces an EMF, a curling E field

17. P22 - Magnetic Flux Thru Wire Loop Analogous to Electric Flux (Gauss’ Law) (1) Uniform B (2) Non-Uniform B

18. P22 - Minus Sign? Lenz’s Law Induced EMF is in direction that opposes the change in flux that caused it

19. P22 - 19 Faraday’s Law of Induction Changing magnetic flux induces an EMF Lenz: Induction opposes change

20. P22 - Ways to Induce EMF Quantities which can vary with time: Magnitude of B Area A enclosed by the loop Angle  between B and loop normal

21. P22 - Group Discussion: Magnet Falling Through a Ring Falling magnet slows as it approaches a copper ring which has been immersed in liquid nitrogen.

22. P22 - 22 Magnet Falling Through a Ring Falling magnet slows as it approaches a copper ring which has been immersed in liquid nitrogen.

23. P22 - 23 Example: Magnitude of B Magnet Falling Through a Ring Falling magnet approaches a copper ring or Copper Ring approaches Magnet

24. P22 - 24 Moving Towards Dipole As ring approaches, what happens to flux? Flux up increases Move ring down

25. P22 - 25 PRS Question: Faraday’s Law

26. P22 - 26 PRS: Faraday’s Law: Loop A coil moves up from underneath a magnet with its north pole pointing upward. The current in the coil and the force on the coil: :00 1.Current clockwise; force up 2.Current counterclockwise; force up 3.Current clockwise; force down 4.Current counterclockwise; force down

27. P22 - 27 PRS Answer: Faraday’s Law: Loop The I dl x B force on the coil is a force which is trying to keep the flux through the coil from increasing by slowing it down (Lenz’s Law again). Answer: 3. Current is clockwise; force is down The clockwise current creates a self-field downward, trying to offset the increase of magnetic flux through the coil as it moves upward into stronger fields (Lenz’s Law).

28. P22 - 28 PRS Question: Loop in Uniform Field

29. P22 - 29 PRS: Loop in Uniform Field A rectangular wire loop is pulled thru a uniform B field penetrating its top half, as shown. The induced current and the force and torque on the loop are: v B out 1.Current CW, Force Left, No Torque 2.Current CW, No Force, Torque Rotates CCW 3.Current CCW, Force Left, No Torque 4.Current CCW, No Force, Torque Rotates CCW 5.No current, force or torque 0

30. P22 - 30 PRS Answer: Loop in Uniform Field The motion does not change the magnetic flux, so Faraday’s Law says there is no induced EMF, or current, or force, or torque. Of course, if we were pulling at all up or down there would be a force to oppose that motion. Answer: 5. No current, force or torque v B out

31. P22 - Group Problem: Changing Area Conducting rod pulled along two conducting rails in a uniform magnetic field B at constant velocity v 1.Direction of induced current? 2.Direction of resultant force? 3.Magnitude of EMF? 4.Magnitude of current? 5.Power externally supplied to move at constant v?

32. P22 - Changing Angle

33. P22 - The last of the Maxwell’s Equations (Kind of)

34. P22 - 34 Maxwell’s Equations

35. P22 - 35 Experiment 5: Faraday’s Law of Induction

36. P22 - 36 Part 1: Current & Flux Current? Flux? I > 0 BLACK RED

37. P22 - 37 PRS Predictions: Flux & Current

38. P22 - 38 PRS: Flux Measurement Moving from above to below and back, you will measure a flux of: (A) (C) (B) (D) 1.A then A 5. B then B 2.C then C 6. D then D 3.A then C 7. B then D 4.C then A 8. D then B 5. 5 6.6 7. 7 8. 8 0

39. P22 - 39 PRS Answer: Flux Measurement Answer: 6. D then D The direction of motion doesn’t matter – the field and hence flux is always upwards (positive) and it increases then decreases when moving towards and away from the magnet respectively. (D)

40. P22 - 40 PRS: Current Measurement Moving from above to below and back, you will measure a current of: (A) (C) (B) (D) NOTE: CCW is positive! 1.A then A 5. B then B 2.C then C 6. D then D 3.A then C 7. B then D 4.C then A 8. D then B 5. 5 6. 6 7. 7 8. 8 0

41. P22 - 41 PRS Answer: Current Measurement Answer: 2. C then C The direction of motion doesn’t matter – the upward flux increases then decreases so the induced current will be clockwise to make a downward flux then counterclockwise to make an upward one. (C) NOTE: CCW is positive!

42. P22 - 42 PRS: Flux Behavior Moving from below to above, you would measure a flux best represented by which plot above (taking upward flux as positive)? (1) (3) (2) (4) NOTE: Magnet “Upside Down” 1. 1 2. 2 3. 3 4. 4 :0

43. P22 - 43 PRS Answer: Flux Behavior Answer: 2. The field is downward so the flux is negative. It will increase then decrease as you move over the magnet. (2)

44. P22 - 44 PRS: Current Behavior Moving from above to below, you would measure a current best represented by which plot above (taking counterclockwise current as positive)? (1) (3) (2) (4) NOTE: Magnet “Upside Down” 1. 1 2. 2 3. 3 4. 4 0

45. P22 - 45 PRS Answer: Current Behavior Answer: 1. The field is downward so the current will first oppose it (CCW to make an upward flux) then try to reinforce it (CW to make a downward flux) (1)

46. P22 - 46 PRS Confirming Predictions? Flux & Current

47. P22 - 47 Part 2: Force Direction Force when Move Down? Move Up? Test with aluminum sleeve

48. P22 - 48 PRS Question: Wrap-Up Faraday’s Law

49. P22 - 49 PRS: Circuit A circuit in the form of a rectangular piece of wire is pulled away from a long wire carrying current I in the direction shown in the sketch. The induced current in the rectangular circuit is 1.Clockwise 2.Counterclockwise 3.Neither, the current is zero 0

50. P22 - 50 PRS Answer: Circuit B due to I is into page; the flux through the circuit due to that field decreases as the circuit moves away. So the induced current is clockwise (to make a B into the page) Answer: 1. Induced current is clockwise Note: I ind dl x B force is left on the left segment and right on the right, but the force on the left is bigger. So the net force on the rectangular circuit is to the left, again trying to keep the flux from decreasing by slowing the circuit’s motion

51. P22 - 51 Faraday’s Law Problem Solving Session

52. P22 - 52 Technology Many Applications of Faraday’s Law

53. P22 - 53 Metal Detector

54. P22 - 54 Induction Stovetops

55. P22 - 55 Ground Fault Interrupters (GFI)

56. P22 - 56 Electric Guitar Pickups

57. P22 - 57 Electric Guitar

58. P22 - 58 Demonstration: Electric Guitar

59. P22 - 59 PRS Question: Generator

60. P22 - 60 PRS: Generator A square coil rotates in a magnetic field directed to the right. At the time shown, the current in the square, when looking down from the top of the square loop, will be 1.Clockwise 2.Counterclockwise 3.Neither, the current is zero 4.I don’t know :00

61. P22 - 61 PRS Answer: Generator Flux through loop decreases as normal rotates away from B. To try to keep flux from decreasing, induced current will be CCW, trying to keep the magnetic flux from decreasing (Lenz’s Law) Answer: 1. Induced current is counterclockwise Note: I ind dl x B force on the sides of the square loop will be such as to produce a torque that tries to stop it from rotating (Lenz’s Law).

62. P22 - 62 Group Problem: Generator Square loop (side L) spins with angular frequency  in a field of strength B. It is hooked to a load R. 1) Write an expression for current I (t) assuming the loop is vertical at time t = 0. 2) How much work from generator per revolution? 3) To make it twice as hard to turn, what do you do to R?

63. P22 - 63 Demonstration: Levitating Magnet

64. P22 - 64 Brakes

65. P22 - 65 Magnet Falling Through a Ring What happened to kinetic energy of magnet?

66. P22 - 66 Demonstration: Eddy Current Braking

67. P22 - 67 Eddy Current Braking What happened to kinetic energy of disk? (link to movie)link to movie

68. P22 - 68  Eddy Current Braking The magnet induces currents in the metal that dissipate the energy through Joule heating: XX 1.Current is induced counter-clockwise (out from center) 2.Force is opposing motion (creates slowing torque)

69. P22 - 69  Eddy Current Braking The magnet induces currents in the metal that dissipate the energy through Joule heating: XX 1.Current is induced clockwise (out from center) 2.Force is opposing motion (creates slowing torque) 3.EMF proportional to  

70. P22 - 70 Faraday’s Law of Induction Changing magnetic flux induces an EMF Lenz: Induction opposes change

71. P22 - 71 Today: Using Inductance

72. P22 - 72 First: Mutual Inductance

73. P22 - 73 Demonstration: Remote Speaker

74. P22 - 74 Mutual Inductance Current I 2 in coil 2, induces magnetic flux  12 in coil 1. “Mutual inductance” M 12 : Change current in coil 2? Induce EMF in coil 1:

75. P22 - 75 Transformer Step-up transformer N s > N p : step-up transformer N s < N p : step-down transformer Flux  through each turn same:

76. P22 - 76 Demonstrations: One Turn Secondary: Nail Many Turn Secondary: Jacob’s Ladder

77. P22 - 77 Transmission of Electric Power Power loss can be greatly reduced if transmitted at high voltage

78. P22 - 78 Example: Transmission lines An average of 120 kW of electric power is sent from a power plant. The transmission lines have a total resistance of 0.40 . Calculate the power loss if the power is sent at (a) 240 V, and (b) 24,000 V. (a) (b) 83% loss!! 0.0083% loss

79. P22 - 79 Group Discussion: Transmission lines We just calculated that I 2 R is smaller for bigger voltages. What about V 2 /R? Isn’t that bigger? Why doesn’t that matter?

80. P22 - 80 Self Inductance

81. P22 - 81 Self Inductance What if we forget about coil 2 and ask about putting current into coil 1? There is “self flux”: Faraday’s Law 

82. P22 - 82 Calculating Self Inductance 1.Assume a current I is flowing in your device 2.Calculate the B field due to that I 3.Calculate the flux due to that B field 4.Calculate the self inductance (divide out I) Unit: Henry

83. P22 - 83 Group Problem: Solenoid Calculate the self-inductance L of a solenoid (n turns per meter, length, radius R) REMEMBER 1.Assume a current I is flowing in your device 2.Calculate the B field due to that I 3.Calculate the flux due to that B field 4.Calculate the self inductance (divide out I)

84. P22 - 84 Group Problem: Torus Calculate the inductance of the above torus (square cross-section of length a, radius R, N total turns) 1) For assumed current I, what is B(r)? 2) Calculate flux, divide out I

85. P22 - 85 Review: Inductor Behavior I Inductor with constant current does nothing L

86. P22 - 86 I Back EMF I

87. P22 - 87 Demos: Breaking Circuits Big Inductor Marconi Coil The Question: What happens if big  I, small  t

88. P22 - 88 Internal Combustion Engine

89. P22 - 89 Ignition Overview

90. P22 - 90 The Workhorse: The Coil Primary Coil: ~200 turns heavy Cu DC (12 V) in to GND Secondary Coil: ~20,000 turns fine Cu Usually no voltage… When primary breaks up to ~45,000 V

91. P22 - 91 Energy in Inductors

92. P22 - 92 Inductor Behavior I Inductor with constant current does nothing L

93. P22 - 93 1.Start with “uncharged” inductor 2.Gradually increase current. Must work: 3.Integrate up to find total work done: Energy To “Charge” Inductor

94. P22 - 94 Energy Stored in Inductor But where is energy stored?

95. P22 - 95 Example: Solenoid Ideal solenoid, length l, radius R, n turns/length, current I : Energy Density Volume

96. P22 - 96 Energy Density : Magnetic Energy Density : Electric Energy Density Energy is stored in the magnetic field!

97. P22 - 97 Group Problem: Coaxial Cable 1.How much energy is stored per unit length? 2.What is inductance per unit length? HINTS:This does require an integral The EASIEST way to do (2) is to use (1) Inner wire: r = a Outer wire: r = b X I I

98. P22 - 98 PRS Questions: Inductor in a Circuit Stopping a Motor

99. P22 - 99 PRS: Stopping a Motor Consider a motor (a loop of wire rotating in a B field) which is driven at a constant rate by a battery through a resistor. Now grab the motor and prevent it from rotating. What happens to the current in the circuit? 1.Increases 2.Decreases 3.Remains the Same 4.I don’t know :20

100. P22 - 100 PRS Answer: Stopping a Motor Answer: 1. Increases When the motor is rotating in a magnetic field an EMF is generated which opposes the motion, that is, it reduces the current. When the motor is stopped that back EMF disappears and the full voltage of the battery is now dropped across the resistor – the current increases. For some motors this increase is very significant, and a stalled motor can lead to huge currents that burn out the windings (e.g. your blender).

101. P22 - 101 Think Harder about Faraday

102. P22 - 102 PRS Question: Faraday in Circuit

103. P22 - 103 PRS: Faraday Circuit A magnetic field B penetrates this circuit outwards, and is increasing at a rate such that a current of 1 A is induced in the circuit (which direction?). R=100  R=10  A B The potential difference VA-VB is: 1.+10 V 2.-10 V 3.+100 V 4.-100 V 5.+110 V 6.-110 V 7.+90 V 8.-90 V 9.None of the above 0

104. P22 - 104 PRS Answer: Faraday Circuit Answer: 9. None of the above The question is meaningless. There is no such thing as potential difference when a changing magnetic flux is present. R=100  R=10  A B By Faraday’s law, a non-conservative E is induced (that is, its integral around a closed loop is non-zero). Non-conservative fields can’t have potentials associated with them.

105. P22 - 105 Non-Conservative Fields R=100  R=10  E is no longer a conservative field – Potential now meaningless I=1A

106. P22 - 106 Kirchhoff’s Modified 2nd Rule If all inductance is ‘localized’ in inductors then our problems go away – we just have:

107. P22 - 107 Inductors in Circuits Inductor:Circuit element with self-inductance Ideally it has zero resistance Symbol:

108. P22 - 108 BUT, EMF generated by an inductor is not a voltage drop across the inductor! Ideal Inductor Because resistance is 0, E must be 0!

109. P22 - 109 Circuits: Applying Modified Kirchhoff’s (Really Just Faraday’s Law)

110. P22 - 110 LR Circuit

111. P22 - 111 LR Circuit

112. P22 - 112 Need Some Math: Exponential Decay

113. P22 - 113 Exponential Decay Consider function A where: A decays exponentially:

114. P22 - 114 Exponential Behavior Slightly modify diff. eq.: A “decays” to A f :

115. P22 - 115 This is one of two differential equations we expect you to know how to solve (know the answer to). The other is simple harmonic motion (more on that next week)

116. P22 - 116 LR Circuit Solution to this equation when switch is closed at t = 0: (units: seconds)

117. P22 - 117 LR Circuit t=0 + :Current is trying to change. Inductor works as hard as it needs to to stop it t=∞:Current is steady. Inductor does nothing.

118. P22 - 118 PRS Question: Voltage Across Inductor

119. P22 - PRS: Voltage Across Inductor 119 In the circuit at right the switch is closed at t = 0. A voltmeter hooked across the inductor will read: 1. 2. 3. 4.I don’t know 0

120. P22 - 120 PRS Answer: V Across Inductor The inductor “works hard” at first, preventing current flow, then “relaxes” as the current becomes constant in time. Although “voltage differences” between two points isn’t completely meaningful now, we certainly can hook a voltmeter across an inductor and measure the EMF it generates.

121. P22 - 121 LR Circuit t=0 + :Current is trying to change. Inductor works as hard as it needs to to stop it t=∞:Current is steady. Inductor does nothing. Readings on Voltmeter Inductor (a to b) Resistor (c to a) c

122. P22 - 122 Group Problem: Circuits For the above circuit sketch the currents through the two bottom branches as a function of time (switch closes at t = 0, opens at t = T). State values at t = 0 +, T -, T +