1. DIY T-SHIRT UPDATES Ltec 3220 Maymester 2013

2. Muscle Tank DIY T-Shirt Updates BeanieRacer Back Tank MAIN MENU

3. Simple look for working out or wear over sport tops to the gym or beach! Muscle Tank

4. Need: Scissors Lay Shirt Flat Mark With Pen Where To Cut Sleeves NEXT

5. Optional: Fold shirt in half to ensure even cutting Trim neck for looser look NEXT

6. Final Touches Pull the newly trimmed edges to make ends roll onto themselves NEXT

7. Using old knits to make new options for your wardrobe! Beanie

8. Needed: Scissors Sharpie Needle Thread Measuring Tape NEXT

9. Measure about 11 inches of fabric from the bottom NEXT

10. Snip the side of one hem for one continuous panel Measure around the dome of your head NEXT

11. Rounding the Edge For this you will need to fold the panel in either thirds or fourths. Keep the panel inside out so when sewing, the edges will be clean! On the rough edge, create a dome shape by cutting a semi-circle NEXT

13. Sewing up the ends Using the needle and thread, sew the open end of the panel Then fold the dome shaped ends together and sew across NEXT

14. Final For this, there are four folds, creating a T- Shape at the dome NEXT

15. Added detail to a traditional tank Racer Back Tank

16. Similar to the first DIY Tank cut the sleeves and crew neck Using an example, the back will be cut more slimming to allow a fitted look. NEXT

17. Pull ends to roll edges Trim bottom hem for strings for next step NEXT

18. Tie at top of the sleeves at the shoulders with back facing up Wrap remaining rope hem around sleeves NEXT

19. At bottom of roped hem, double knot the ends and tuck under itself. NEXT

20. Final Return to Main Menu