Download presentation
Presentation is loading. Please wait.
Published byElinor Lucas Modified over 9 years ago
1
COLOUR STAIN
2
DIRT STAIN IN FABRIC DYEING
3
FABRIC STORED IN FABRIC DYEING
4
CHEMICAL STORED IN CHEMICAL ROOM IN WET AREA DTD.09/08/2008
5
POOR FASTNESS YARN DYEING COMBO
6
POOR STORAGE IN FINISH WARE HOUSE
7
POOR STORAGE IN FINISH WARE HOUSE FABRIC
9
IN WARE HOUSE FABRIC & EMPTY RACKS ARE MIS-USED FAN
10
INSPECTION DEPTT. WHITE COLLOR KEPT OPEN DTD 2/8/08
11
POOR STORAGE INSPECTION & AUDIT SECTION
12
PADEER MARK ON FABRIC ON FABRIC AT STENTER M/C (PADDER CHANGED)
13
PACKING REMOVED IN FINISH WRAE HOUSE AND FABRIC DAMAGED BY KEEPING THE FOOT ON THE FABRIC FOOT PRINTS VISIABLE
14
(CHEMICAL DOSING IN AT-3 M/C) CHEMICAL NOT PREPAIRED PROPERY CHEMICAL LUMPS ARE VISIBLE CHEMICAL LUMPS
15
DAMGED ROLL SURFACE ON THE SANTEX RELAX DRIER ABRATION MARKS ON SANTEX DRIER ROLLER
16
CHEMICAL STAINS ON THE SANTEX DRIER
17
RUST MARK DURING STORAGE
18
FABRIC STORED IN DYE HOUSE
19
FABRIC STORED IN FABRIC DYEING
20
IN FABRIC DYEING DURING LOADING FABRIC FALLING ON WET DIRTY SURFACE
21
CHEMICAL STORAGE IN DIRTY BUCKETS
22
ROLLER STAINS ON ANUP CUT M/C (ATTAINDED THE PROBLEM )
23
ARRANGEMENT MADE TO SAVE FABRIC BEING FALLS FROM THE TROLLIES
24
IN FABRIC DYEING DURING LOADING FABRIC FALLING ON WET & DIRTY SURFACE
25
PIGEON DIRT IN GREY WARE HOUSE
26
COLOUR STAINS
27
OIL STAIN
29
FABRIC LOADING IN DEVREKHA M/C
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.