1. SPX ITALIA – TECNOTEST Division ECUREADER 4.90 -ENG
Autodiagnosis 1|4 2009
By ATA

2. Summary
Welcome
The update from 4.80  4.90
Special procedures
Q & A

3. Vehicles & Systems Update

4. ALFA ROMEO MITO 08 Cars – news of 4.90 ABS+TRACT.CONTR. BOSCH ESP EP 2
AIRBAG SIEMENS SRS EP-PROXY2
CLIMA DENSO EP
ENGINE MANAGEMENT 1.6 MJET BOSCH EDC 16C39
DASH BOARD SIEMENS
CHASSIS NETWORK DELPHI Body Computer Can info
ELECTRIC POWER STEERING DELPHI EPS
VISUAL./TELEMATICA MARELLI-MICROSOFT Convergence

5. Cars – news of 4.90
AUDI
A3 ’07 >
SERVICE
A6 ’98 > ’02
AIRBAG

6. BMW Z4 Series(E85) ’04 > CHEVROLET CAPTIVA Cars – news of 4.90
IMMOBILIZER Immobilizer EWS
CHEVROLET
CAPTIVA
TIRE PRESSURE Omron TPMS 0400

7. CITROEN C5 C-Crosser Cars – news of 4.90
ENGINE MANAGEMENT 2.0 HDI BOSCH EDC 15 C2 Common Rail
C-Crosser
DASH BOARD YASAKI
ABS+TRACT.CONTR TEVES ABS/ESP
AIRBAG TRW AirBag
CLIMA MITSUBISHI
ENGINE MANAGEMENT 2.2 HDI FAP 160cv BOSCH

8. CITROEN Xsara Xsara2 Xsara Picasso Cars – news of 4.90
ENGINE MANAGEMENT 2.0 HDI RHY SIEMENS SID 801 Common Rail
Xsara2
KEY CODING VALEO
ENGINE MANAGEMENT 2.0 HDI RHZ BOSCH EDC 15 C2 Common Rail
Xsara Picasso
KEY CODING VALEO

9. CITROEN BERLINGO BERLINGO 2 Cars – news of 4.90
ENGINE MANAGEMENT 2.0 HDI BOSCH EDC 15 C2 Common Rail
BERLINGO 2
KEY CODING VALEO

10. DACIA LOGAN ’07 > SANDERO Cars – news of 4.90 AIRBAG AMR AirBag
CHASSIS NETWORK
ELECTRIC POWER STEERING EPS
SANDERO
ABS BOSCH ABS 8.0
AIRBAG BOSCH AirBag
AIRBAG AUTODETECT
ENGINE MANAGEMENT 1.4 MPI SIEMENS Sirius 32
ENGINE MANAGEMENT AUTODETECT
IMMOBILIZER
CHASSIS NETWORK AUTODETECT
ELECTRIC POWER STEERING AUTODETECT

11. DACIA SANDERO GAS FIAT PANDA 03 SEDICI Cars – news of 4.90
ENGINE MANAGEMENT AUTODETECT
FIAT
PANDA 03
ENGINE MANAGEMENT 1.3 Multijet FAP MARELLI 6F3 Common Rail
SEDICI
ENGINE MANAGEMENT v DENSO MPI SZK

12. FIAT FIORINO 08 FORD KUGA Cars – news of 4.90 DASH BOARD MARELLI
AIRBAG RCN
ENGINE MANAGEMENT 2.0 Tdci PCM Common Rail

13. HONDA CR-V New Gen JEEP COMPASS ’07 > Cars – news of 4.90
ENGINE MANAGEMENT 2.2 i CTDi BOSCH EDC Common Rail
JEEP
COMPASS ’07 >
ELECTRIC 4X AWD
DASH BOARD CNN
CHASSIS NETWORK Central Gateway
ELECTRIC POWER STEERING EPS

14. LANCIA DELTA 08 Cars – news of 4.90 ABS+TRACT.CONTR. TRW ESP
AIRBAG SIEMENS AirBag
AUTOMATIC TRASMISSION Marelli Selespeed CFC300
ENGINE MANAGEMENT 1.6 MJET 16v BOSCH EDC 16C32 CF5/EOBD
DASH BOARD Marelli
CHASSIS NETWORK Marelli
ELECTRIC POWER STEERING TRW EPS

15. LAND ROVER RANGE ROVER SPORT Cars – news of 4.90 ABS+TRACT.CONTR.
AIRBAG
ENGINE MANAGEMENT 2.7 V6 Diesel BOSCH EDC Common Rail

16. MERCEDES BENZ 169 A-Class ’06 > 202 C-Class ’98 >
Cars – news of 4.90
MERCEDES BENZ
169 A-Class ’06 >
RIGHT FRONT DOOR KOSTAL TSG-VL
LEFT FRONT DOOR KOSTAL TSG-VL
202 C-Class ’98 >
ABS+TRACT.CONTR. ATE ABS
ENGINE MANAGEMENT C220 D LUCAS_BOSCH EVE
DASH BOARD VDO KIW
CHASSIS NETWORK SAM

17. MERCEDES BENZ 203 C-Class ’03 > 210 E-Class SPRINTER ’07 >
Cars – news of 4.90
MERCEDES BENZ
203 C-Class ’03 >
AUTOMATIC TRASMISSION SIEMENS EGS 7G-Tronic
210 E-Class
DASH BOARD (’00 >’01) KIW
DASH BOARD(‘97 >’99) VDO KI
SPRINTER ’07 >
CHASSIS NETWORK TEMIC SAM

18. OPEL ANTARA PEUGEOT 206 Cars – news of 4.90 TIRE PRESSURE OMRON
REMOTE CONTROL CODING VALEO
ENGINE MANAGEMENT 1.6 HDI FAP BOSCH EDC 16 Common rail

19. PEUGEOT 207 307 Cars – news of 4.90 SERVICE RESET SIEMENS
ENGINE MANAGEMENT 1.4 HDI BOSCH EDC 16 C3 Common Rail
ENGINE MANAGEMENT 1.6 HDI BOSCH EDC 16 C3 Common Rail
ENGINE MANAGEMENT 1.6 HDI FAP BOSCH EDC 16 C34 Common Rail
ELECTRIC POWER STEERING KOYO EPS 8401
307
KEY CODING (’02 >) VALEO
ENGINE MANAGEMENT 2.0 HDI BOSCH EDC 15 C2 Common Rail

20. PEUGEOT 307 Restyling Cars – news of 4.90 SERVICE RESET VDO
RAIN-BRIGHTNESS SENSOR BOSCH WSS
ENGINE MANAGEMENT 1.6 HDI FAP (9HZ) BOSCH EDC 16 C34 Common Rail COMBINATION SWITCH MODULE EATON/DELPHI
DRIVER SIDE DOOR ArvinMeritor
PASSENGER SIDE DOOR ArvinMeritor

21. PEUGEOT 308 406 ’01 > ’04 Cars – news of 4.90 KEY CODING JCAE
REMOTE CONTROL CODING JCAE
406 ’01 > ’04
ENGINE MANAGEMENT 2.0 HDI BOSCH EDC 15 C2 Common Rail

22. PEUGEOT 407 Cars – news of 4.90 ABS+TRACT.CONTR. TEVES ABS/ESP
AIRBAG TRW Airbag
CLIMA MITSUBISHI
CLIMA DAV
DASHBOARD YASAKI
DASHBOARD VDO
KEY CODING JCAE
REMOTE CONTROL CODING JCAE
COMBINATION SWITCH MODULE VALEO
PARKING BOSCH
DRIVER SIDE DOOR Brose
PASS. SIDE DOOR Brose
CHASSIS NETWORK BSI
ELECTRIC POWER STEERING HPI EPS GEP

23. PEUGEOT 607 NOUVELLE 406 PARTNER Cars – news of 4.90
ENGINE MANAGEMENT 2.0 HDI BOSCH EDC 15 C2 Common Rail
NOUVELLE 406
KEY CODING VALEO
PARTNER
AIRBAG AKF-Autoliv
KEY CODING VALEO/SIEMENS

24. PEUGEOT BOXER EXPERT Cars – news of 4.90 IMMOBILIZER Delphi Code2
ENGINE MANAGEMENT 2.0 HDI BOSCH EDC 15 C2 Common Rail

25. RENAULT CLIO III (Autodetect) Cars – news of 4.90
AUTOMATIC TRASMISSION TUTTI
PARKING TUTTI
TIRE PRESSURE TUTTI
DASH BOARD TUTTI
BEAM LEVELLING MODULE TUTTI
ELECTRIC POWER STEERING TUTTI

26. ESPACE IV (Autodetect)
Cars – news of 4.90
RENAULT
ESPACE IV (Autodetect)
AUTOMATIC TRASMISSION TUTTI
PARKING TUTTI
BEAM LEVELLING MODULE TUTTI
ESPACE IV ph2 (Autodetect)
AUTOMATIC TRASMISSION TUTTI
PARKING TUTTI
BEAM LEVELLING MODULE TUTTI
CHASSIS NETWORK TUTTI

27. LAGUNA II (Autodetect)
Cars – news of 4.90
RENAULT
LAGUNA II (Autodetect)
AUTOMATIC TRASMISSION TUTTI
PARKING TUTTI
BEAM LEVELLING MODULE TUTTI
CHASSIS NETWORK TUTTI
LAGUNA II ph2 (Autodetect)
CLIMA TUTTI
PARKING BRAKE. TUTTI
CHASSIS NETWORK TUTTI

28. MEGANE II (Autodetect)
Cars – news of 4.90
RENAULT
MEGANE II (Autodetect)
AUTOMATIC TRASMISSION TUTTI
LEFT HEADLIGHT MODULATION TUTTI
RIGHT HEADLIGHT MODULATION TUTTI
PARKING TUTTI
BEAM LEVELLING MODULE TUTTI
CHASSIS NETWORK TUTTI
SUN ROOF TUTTI
GAS ENGINE MANAGEMENT TUTTI

29. RENAULT MODUS (Autodetect) Cars – news of 4.90
AUTOMATIC TRASMISSION TUTTI
PARKING TUTTI
TIRE PRESSURE TUTTI
DASH BOARD TUTTI
BEAM LEVELLING MODULE TUTTI
ELECTRIC POWER STEERING TUTTI

30. SCENIC II (Autodetect)
Cars – news of 4.90
RENAULT
SCENIC II (Autodetect)
AUTOMATIC TRASMISSION TUTTI
PARKING BRAKE TUTTI
PARKING TUTTI
DASH BOARD TUTTI
BEAM LEVELLING MODULE TUTTI
CHASSIS NETWORK TUTTI
VISUAL./TELEMATICS TUTTI
GAS ENGINE MANAGEMENT TUTTI

31. VEL SATIS (Autodetect)
Cars – news of 4.90
RENAULT
VEL SATIS (Autodetect)
AUTOMATIC TRASMISSION TUTTI
CRUISE CONTROL TUTTI
PARKING TUTTI
TIRE PRESSURE TUTTI
BEAM LEVELLING MODULE TUTTI
CHASSIS NETWORK TUTTI

32. VEL SATIS ph2 (Autodetect)
Cars – news of 4.90
RENAULT
VEL SATIS ph2 (Autodetect)
AUTOMATIC TRASMISSION TUTTI
PARKING TUTTI
DASH BOARD TUTTI
BEAM LEVELLING MODULE TUTTI

33. Brabus, Brabus Xclusive, Cabrio, Passion, Pulse, Pure
Cars – news of 4.90
SMART
FORTWO 07
Brabus, Brabus Xclusive, Cabrio, Passion, Pulse, Pure
CLIMA HELLA KLA

34. Cars – news of 4.90
SUZUKI
SX4
ENGINE MANAGEMENT v DENSO MPI SZK

35. VOLKSWAGEN CRAFTER ’06 > T5-CARAVELLE ’03 > ’06
Cars – news of 4.90
VOLKSWAGEN
CRAFTER ’06 >
ENGINE MANAGEMENT 2.5 TDI (89cv 109cv 130cv 164cv)
DASH BOARD
T5-CARAVELLE ’03 > ’06
SERVICE RESET
T5-TRANSPORTER ’03 > ’06

36. Special procedures

37. ALFA ROMEO – MITO Special procedures ENGINE MANAGEMENT 1.6 Diesel MJET
Engine oil replacement
The following procedure allows updating the ECU parameters
concerning engine oil quality / ageing.
Carry out this procedure after each engine oil replacement.
WARNING:
Once the procedure has been completed, switch ignition off and wait at
least 40 seconds for POWER LATCH completion
(old data will be erased and new values written down in the ECU ).

38. ALFA ROMEO – MITO Special procedures ENGINE MANAGEMENT 1.6 Diesel MJET
Learnt functions reset
This procedure allow to clear the ECU’s learnt functions / configuration, like for example: clima, cruise, trasmission, abs, ecc.
Example: Presence of manual gear will be automatically dectected by clutch pedal pulled / released.
Presence of cruise control will be automatically detected once activated.

39. ALFA ROMEO – MITO Special procedures ENGINE MANAGEMENT 1.6 Diesel MJET
Components replacement
This procedure allows the ECU to learn parameters concerning the
components below, in case of its replacement.
The procedure is automatic and the same for :
Rail pressure sensor
E.G.R. (Exaust Gas Recirculation)
O2 sensor
M.A.F. ( Manifold Air Flow )
D.P.F.E. ( Differential Pressure Feedback on Exausts)

40. ALFA ROMEO – MITO Special procedures ENGINE MANAGEMENT 1.6 Diesel MJET
Injectors coding
This procedure allows storing in the ECU each individual
cylinder’s injector code in case of its replacement.
Through this, the ECU can manage in the optimal way the
injection time according to the new injectors and the present
engine status.
Usually the codes are supplied with the injectors, but in any
case printed on each injector body.
At the beginning of the procedure, just introduce the code and confirm.

41. AUDI A3 2007 > 2008 Special procedures
SERVICE (Gasoline – Diesel version)
Longlife / Standard Service configuration
This function allows to set the dashboard maintenance indicator with the Kilometers/time
prearranged by the manufactorer in two differents modality LONGLIFE or STANDARD.
Automatically are setted up the value below:
- Oil quality: Longlife
- Driven KM/miles minimun value: 15000/9300
- Driven KM/miles maximun value : 30000/18600
- Elapsed time minimun value: 365 days;
- Elapsed time maximun value : 730 days.
WARNING: this procedure modify only the type of the maintenance (normal / LONGLIFE); for reset
the dashboard maintenance indicator to perform the function: “Reset. Km prox. Service".

42. AUDI A3 2007 > 2008 Special procedures
SERVICE (Gasoline – Diesel version)
Time/distance service reminder configuration
This function allows to set the service reminder indicator in
therms of time/distance.
In this way the maintenance warning will appear after
15000 Km (9300 miles) or 1 year from the last performed service.

43. AUDI A3 2007 > 2008 Special procedures SERVICE REMINDER
(Gasoline – Diesel version)
KM/Mi Reset for next Service
This function allows to reset back to the factory default the
dashboard maintenance/service indications.
WARNING:
This procedure cannot modify the range from a service to
the next one.
Settings can be changed performing the following available
functions :
“Time/distance service reminder configuration“ and
" Longlife/standard service configuration “

44. CITROEN C4 PEUGEOT 307 Restyling Special procedures AIRBAG ECU Unlock
This procedure allows to enable the standard operating of the ECU.
This procedure is needed in case of ECU replacement, due to the
fact that new airbag ECUs are locked by default by the
manufacturer, to prevent any accidental explosion if working on
or near the airbag system devices.

45. CITROEN C4 PEUGEOT 307 Restyling Special procedures AIRBAG
ECU configuration
This procedure allows the airbag system configuration in order to
units/sensors installed on the vehicle.
It consists of enabling/disabling each units/sensors by following
the available components list.
It is suggested to note units/sensors enabled on the old ECU
(having a look at live data items) to configure the new ECU like the
old one.
During the procedure, all the possible options will be shown:
just choose "V" key if the unit/sensor is present on the vehicle,
otherwise "X" key if not.
segue 

46. CITROEN C4 PEUGEOT 307 Restyling Special procedures AIRBAG
ECU configuration
WARNING !
This configuration is mandatory for a good functionality of the
Airbag system;
It means that ALL installed components in the vehicle must be
enabled.
This procedure is considered under fully responsibility
of the operator.

47. CITROEN Xsara 2 / Xsara Picasso PEUGEOT 307 / 307 Restyling, 308,
Special procedures
CITROEN Xsara 2 / Xsara Picasso
PEUGEOT 307 / 307 Restyling, 308,
Nouvelle 406, 407, Partner
Key coding
This function allows to code new keys as well as already programmed
keys (used keys) but stored in the ECU memory.
Don’t forget that NO MORE than a MAX of 5 keys are accepted
by the system.
Once the function has run, the system asks for the security code
(PIN).
WARNING:
Please mind that introducing wrong security code will lock the ECU !
Carefully FOLLOW all shown messages step by step by the tool during
the procedure.

48. CITROEN Xsara 2 / Xsara Picasso PEUGEOT 307 / 307 Restyling, 308,
Special procedures
CITROEN Xsara 2 / Xsara Picasso
PEUGEOT 307 / 307 Restyling, 308,
Nouvelle 406, 407, Partner
Remote controls coding
The procedure must be manually performed, just follow one by one the steps below:
Swich ignition off, leave out the key.
Wait one minute and don’t touch any key in any remote control.
Insert a key and switch ignition on .
Within 10 seconds, press and hold the doors LOCK key for 5 seconds
Switch ignition off and leave out the key.
For remaining keys, just repeate the procedure from step 3 on, otherwise go to step 7
Wait for 30 seconds; after that, the remotes will be activated.
WARNING: If step 4 not perfomed on time, the Body Computer will start the
“antiscanning mode” for one minute;
during this time it is impossible to code the remotes.

49. CHEVROLET CAPTIVA ’08 >
Special procedures
CHEVROLET CAPTIVA ’08 >
TIRE PRESSURE OMRON
Sensors Learning
The procedure allows the learning of all tire pressure sensor by the ECU.
To do it, just follow the instruction below:
1. Run the function.
2. Within 2 minutes go to the LEFT FRONT wheel and activate the sensor code trasmission by
using the proper tool.
3. Confirmation of the transmission code activation is shown by a blink of the correspondent turn
light indicator (L.F., L.R., R.R, R.L.)
4. A briefly horn activation means that the code is learnt
5. Continue clockwise with the remaining wheels (L.R., R.R, R.L.) repeating all steps from #2 on
6. A double briefly horn activation confirms that the last sensor code is learnt and the procedure is
successfully completed.

50. DACIA LOGAN ’07 > Special procedures AIRBAG ECU lock / unlock
This function allows to enable/disable the standard ECU operating before any intervention or maintenance on airbag system, to prevent any accidental explosion if working on
or near the airbag system devices.
WARNING:
This procedure is needed in case of ECU replacement, due to the
fact that new airbag ECUs are locked by default by the manufacturer.

51. LANCIA DELTA ‘08 Special procedures ABS Sensors calibration Yaw
G-sensors (lateral + longitudinal)
Brake pressure
Through this function it is possible to perform the sensors calibration.
It is needed in case of ECU or sensors replacement.
The procedure must be done with vehicle stopped and placed on a flat
surface.

52. LANCIA DELTA ‘08 Special procedures ABS Speed sensor Learning
This procedure allows to learn by the ECU which type of speed
sensor is installed on the vehicle:
- normal type
- intelligent type for the semiautomatic parking aid

53. LANCIA DELTA ‘08 Special procedures ABS Configuration Learning
This procedure allows ABS ECU configuration learning by the
Body Computer, and it is needed in case of ECU replacement.
 

54. LANCIA DELTA ‘08 Special procedures ELECTRIC POWER STEERING
Steering wheel angle sensor calibration
This procedure allows to calibrate the mentioned sensor,
and it must be done each time in case of sensor replacement,
wheel alignment or any intervention on the Directional Tread.
Is possible to carry out the procedure only with the condition below:
- only for vehicles equipped by ESP
- vehicle stopped
- no faults in memory
- vehicle must be placed on a flat surface
Centrally align wheels and steering wheel, then perform the
procedure.
To check if the procedure completion has been successfully done,
drive the vehicle at 30km/h (20mph), then steering fully left and right
and check that steering wheel come back to its central position
(+/- 20 degrees).

55. LANCIA DELTA ‘08 Special procedures ELECTRIC POWER STEERING
Assembling check
This procedure allows to detect any faults of electric power
steering assembling .
Proceed as described below:
- centrally align wheels and steering wheel
- fully steering left and right
- come back to the central position

56. Mercedes A-Class 169 ’08 >
Special procedures
Mercedes A-Class 169 ’08 >
ELECTRIC POWER STEERING
Steering torque sensor calibration
Through this function it is possible to perform automatically the calibration of the steering torque sensor.
Centrally align wheels and leave the steering wheel with no any applied load.
Wrong calibration will cause steering wheel hardness when moving it in one direction ( left or right).
Proper values at procedure completion: 0,0 Nm +/- 0,2 .

57. OPEL ANTARA ’08 > Special procedures TIRE PRESSURE OMRON
Sensors Learning
The procedure allows the learning of all tire pressure sensor by the ECU.
To do it, just follow the instruction below:
1. Run the function.
2. Within 2 minutes go to the LEFT FRONT wheel and activate the sensor code trasmission by
using the proper tool.
3. Confirmation of the transmission code activation is shown by a blink of the correspondent turn
light indicator (L.F., L.R., R.R, R.L.)
4. A briefly horn activation means that the code is learnt
5. Continue clockwise with the remaining wheels (L.R., R.R, R.L.) repeating all steps from #2 on
6. A double briefly horn activation confirms that the last sensor code is learnt and the procedure is
successfully completed.

58. RENAULT CLIO II ’03 > Special procedures IMMOBILIZER (UCH)
New UCH module storing
This function allows the UCH ECU configuration concerning immobilizer/coded key.
A valid and already coded key is needed, together with a “repair code” that can be found through the official network providing the VIN number.
Follow carefully the instructions on the screen; in case of faults during the procedure, the following message can be displayed :
1 = UCH already stored. Proceed with key coding.
Once finished, it will be possible to proceed with key coding, using the proper function.

59. RENAULT CLIO II ’03 > Special procedures UCH (Body Computer)
Key coding
This function allows the key coding new keys as well as already programmed keys (used keys) but stored in the ECU memory.
A “repair code” is needed, and it can be found through the official network providing the VIN number.
Follow carefully the instructions on the screen; in case of faults during the procedure, the following messages can be displayed:
1 = procedure stopped: warning ! the assigned keys for this vehicle are the same as before starting the procedure. All keys coded before the procedure interruption are not stored, and cannot be assigned to this vehicle
2 = UCH not stored; carry out “UCH module storing”
3 = check if the “repair code” is correct.

60. SMART FORTWO Special procedures ABS (’98 >’04) & ESP (’03 >’05)
Steering wheel angle sensor calibration
This procedure allows to calibrate the mentioned sensor, and it must be done each time in case of sensor replacement, wheel alignment or any intervention on the Directional Tread.
To do it, please respect the following conditions:
The vehicle must be placed in a flat surface.
Centrally align wheels and steering wheel therefore perform the procedure.
Centrally align wheels and steering wheel, then perform the
procedure.
To check if the procedure completion has been successfully done, drive the vehicle at 30km/h (20mph), then steering fully left and right and check that steering wheel come back to its central position (+/- 20 degrees).

61. SMART FORTWO Special procedures AIRBAG (’98 >’05)
Child safety seat Detection
This function allows to enable/disable the child seat detection for passenger side seat.
WARNING:
If DETECTION is set OFF, MIND TO ADVISE that is FORBIDDEN to place any child safety seat !
The AirBag unit is ACTIVE !
(WARNING sticker applied on the windshield is suggested).
The function status can be checked by looking for the concerning items at the live data page.

62. Questions