Download presentation
Presentation is loading. Please wait.
Published byElla Stone Modified over 9 years ago
1
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Figure 3-2 CSMA/CD
2
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Figure 3-3 Ethernet layers
3
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Figure 3-4 Ethernet frame
4
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Transceivers Transceivers are used to connect nodes to the various Ethernet media. Most computers and network interface cards contain a built-in 10BASE-T or 10BASE2 transceiver, allowing them to be connected directly to Ethernet without requiring an external transceiver. Many Ethernet devices provide an AUI (Attachment Unit Interface ) connector to allow the user to connect to any media type via an external transceiver. The AUI connector consists of a 15-pin D-shell type connector, female on the computer side, male on the transceiver side. Thickwire (10BASE5) cables also use transceivers to allow connections
5
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Figure 3-5:a Ethernet implementation
6
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 The Original Ethernet The first Ethernet (10Base5) used a bus topology and a thick coaxial cable. Transceivers connect the network adapters to the cable via a vampire tap that "bites" into the coax.
7
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Figure 3-5:b Ethernet implementation
8
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Thin Ethernet 10Base2 Ethernet was a later variation of the original 10Base5. It used a thinner coaxial cable attached to each node using BNC (bayonet Neil-Concelman) T-connectors
9
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Figure 3-5:c Ethernet implementation
10
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Ethernet Switch This 10/100 switch from Omnitron has 16 ports and automatically senses the transmission rate of the line and adjusts accordingly Twisted Pair Ethernet Most Ethernets use twisted pair wiring. All cables use RJ-45 connectors between the network adapters in the PC and a central hub or switch
11
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Figure 3-5:d Ethernet implementation
12
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Figure 3-6:a Fast Ethernet implementation
13
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Figure 3-6:b Fast Ethernet implementation
14
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Figure 3-6:c Fast Ethernet implementation
15
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Figure 3-7:a Gigabit Ethernet implementation
16
McGraw-Hill©The McGraw-Hill Companies, Inc., 2000 Figure 3-7:b Gigabit Ethernet implementation
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.