1. AutoMARK Overview Preparation & Testing

2. AutoMARK: An Overview Q: What is it? A: A great big printer Q: When is it used? A: Onestop and Election Day Q: Why? A: To satisfy the HAVA ADA requirement. Q: Who uses it?A: Any voter, in particular, voters with disabilities Q: How easy is it to use?A: It’s AutoMarktic!

3. PREPARATION MODE Setting up the AutoMARK for election prep and testing is easy. To set up, you will need the AutoMARK, power cord, Mode Switch Key, and ADA headphones.

4. Step 1: Installing Compact Flash Things to remember when installing the compact flash card:  Ridge on card goes to the inside  Red arrows goes to the outside bottom  Precinct official gets gold key  CBE keeps silver key

5. Steps 2 & 3 should be done with AutoMARK in the TEST mode.

6. Step 2: Installing Test Ink Cartridge Used ink cartridges may be used during testing. Used ink cartridges may be used during testing. A new cartridge should be used at each election. A new cartridge should be used at each election. New cartridges should be installed at the polling place to prevent leaks. New cartridges should be installed at the polling place to prevent leaks.

7. Step 3: Setting Date & Time  Select “System Maintenance”  Enter password  Set Date/Time (standard 12 hour format)  Clear must be pressed to change date/time  Always press APPLY to save changes  Press DONE to exit

8. Steps 4 - 9 should be done with AutoMARK in the ON mode

9. Step 4: Unlocking the Flash Memory Card The first time a flash card is inserted in the AutoMARK, it is possible that the flash card will need to be unlocked. The first time a flash card is inserted in the AutoMARK, it is possible that the flash card will need to be unlocked. An encryption code is used for security purposes and will be sent to the CBE separately from the flash card itself. An encryption code is used for security purposes and will be sent to the CBE separately from the flash card itself. Unlocking the flash card is done from the main menu of the AutoMARK screen. Unlocking the flash card is done from the main menu of the AutoMARK screen.

10. Step 5: Selecting Precincts & Ballots  Press SELECT AVAILABLE PRECINCTS option from the main menu.  Move selections as needed from left to right.  Press DONE when you have made all of your selections.

11. Step 6: Ballot Print Test Starting from Main Menu Press Test Ballot Print Press Test Ballot Print Select Enable Calibration Suggestions box Select Enable Calibration Suggestions box Insert an unmarked ballot (You will want to check all orientations of ballots) Insert an unmarked ballot (You will want to check all orientations of ballots) Confirm that all ovals have been properly filled in. Confirm that all ovals have been properly filled in. Press Yes to recalibrate if it suggested. Press Done to finish. Press Yes to recalibrate if it suggested. Press Done to finish. Do not manually change calibration – CALL ES&S Do not manually change calibration – CALL ES&S

12. Step 7: Checking Battery Status Starting from Main Menu Press Test Ballot Print Press Test Ballot Print Press Battery Status Press Battery Status Confirm power source is external and good Confirm power source is external and good Press Done Press Done

13. Step 8: Testing the AutoMARK The screen should display, Insert Your Ballot The screen should display, Insert Your Ballot From your current election, insert an unmarked ballot From your current election, insert an unmarked ballot Test all buttons at the bottom of the screen ( ZOOM IN/OUT, HIGH CONTRAST) Test all buttons at the bottom of the screen ( ZOOM IN/OUT, HIGH CONTRAST) Proceed and vote using the touch screen only, if necessary test write-in. Proceed and vote using the touch screen only, if necessary test write-in.

14. Step 9: Test Vote Using Keypad The screen should display, Insert Your Ballot The screen should display, Insert Your Ballot From your current election, insert an unmarked ballot From your current election, insert an unmarked ballot Press the Right Arrow Key to proceed to first contest Press the Right Arrow Key to proceed to first contest Test Repeat, Tempo, Volume, and Screen keys Test Repeat, Tempo, Volume, and Screen keys Test for Write-ins, if necessary by using the Up and Down keys to scroll through the alphabet and then pressing Select when hearing the letter of your choice Test for Write-ins, if necessary by using the Up and Down keys to scroll through the alphabet and then pressing Select when hearing the letter of your choice Once your ballot is marked, press the Right Arrow key. Once your ballot is marked, press the Right Arrow key.

15. Precinct Officials Overview Step 1 – Take AutoMARK out of case and put on an ADA compliant table Step 1 – Take AutoMARK out of case and put on an ADA compliant table Step 2 – Plug it in Step 2 – Plug it in Step 3 – Open screen Step 3 – Open screen Step 4 – Install ink cartridge Step 4 – Install ink cartridge Step 5 – Turn it on! Step 5 – Turn it on!

16. Summary Notes This machine does not store votes! It is a giant ink pen! This machine does not store votes! It is a giant ink pen! These cases and machines are very heavy—work in teams when handling and moving these machines, SAFETY FIRST These cases and machines are very heavy—work in teams when handling and moving these machines, SAFETY FIRST Protect your machine keys Protect your machine keys Store your AutoMARK machines flat and not upright or on its side. Store your AutoMARK machines flat and not upright or on its side.