1. CTE Safety Test
Answer Key

2. 1. The ABC’s of shop safety stand for what?
Answer: Always Be Careful

3. 2. What is the name of the yellow lines on the floor around each machine?
Answer: Safety zone

4. 3. How many people should be inside the yellow lines per machine
3. How many people should be inside the yellow lines per machine? Answer: 1

5. 4. True or False Loose clothing can be worn in the shop.
Answer: False

6. 5. True or False The operator is the only person to turn a machine on or off.
Answer: True

7. 6. What must be worn at all times in the shop?
Answer: Safety glasses

8. 7. True or False No running, pushing or shoving in the lab or shop.
Answer: True

9. 8. All accidents should be reported to whom?
Answer: Mr. LeBaron

10. 9. True or False All students are responsible for the safety of themselves.
Answer: True

11. 10. True or False Long hair should be worn in a pony tail.
Answer: true

12. 11. What is the name of this machine?
Answer: Drill Press

13. 12. What is the name of this?
Answer: Chuck key

14. 13. Before turning on this machine remove the _____ ____.
Answer: Chuck key

15. 14.When must this clamp be used?
Answer: When Drilling something smaller than your fist

16. 15. True or False Oily rags should be placed only in a fire proof garbage can.
Answer: True

17. 16. What is the name of this machine?
Answer: Disc Sander

18. 17. Which side of the wheel do you sand your work on when using this type of machine?
Answer: Down side

19. 18. True or False You can have two people work on this machine at the same time.
Answer: False

20. 19. True or False It is OK to talk to somebody while they are operating a machine.
Answer: False

21. 20. What is the name of this machine?
Answer: Belt sander

22. 21. What is the name of this machine?
Answer: Scroll saw

23. 22. True or False The Blade should be tightened only by hand.
Answer: True

24. 23. True or False This saw is used to cut small curves.
Answer: True

25. 24. What is the name of this machine?
Answer: Band saw

26. 25. True or False This saw is used only to make straight cuts.
Answer: False

27. 26. You will not cut yourself if your fingers never touch the __________ __________.
Answer: Throat Plate

28. Answer: Less than a Pencil width or ¼ inch
27. The guard on this machine should be how far above the material you are cutting?
Answer: Less than a Pencil width or ¼ inch

29. 28. True or False All jewelry can be worn while working on the machines.
Answer: False

30. 29. What is the name of this hand tool?
Answer: Hammer

31. 30. What is the name of this hand tool?
Answer: Nail Punch or Nail Set

32. 31. What is the name of this hand tool?
Answer: Hand File

33. 32. True or False It is ok to open paint cans with this tool.
Answer: False

34. 33. What is the name of this hand tool?
Answer: Speed Square

35. 34. What is the name of this hand tool?
Answer: Combination Square

36. 35. True or False Hardwood comes from trees that stay green all year long.
Answer: False

37. 36. True or False It’s ok to play with the tape measure.
Answer: False

38. 37. True or False Sanding with the grain is a good idea.
Answer: True

39. 38. Which grit would sand wood the smoothest? 100 or 220
Answer: 220

40. 39. True or False If you are not familiar with a machine it would be wise to ask for instructions.
Answer: True

41. 40. True or False “Keep your mind on your work” is an important slogan to machine operators.
Answer: True