1. Introduction to Analytical Chemistry Dr M. Abd-Elhakeem Faculty of Biotechnology General Chemistry Lecture 7

2. What is Analytical Chemistry? Analytical chemistry is the study of the separation, identification, and quantification of the chemical components of natural and artificial materials separationquantificationchemicalmaterials

3. What is Analytical Chemistry? Separation ------------ Analyses

4. 1. Separation : Separation convert a mixture of substances into two or more distinct product.mixture Separations are carried out based on differences in physical or chemical properties such as size, shape, mass, or chemical affinity between the constituents of a mixture.

5. 2- Analysis Qualitative Analysis Quantitative Analysis

6. Qualitative analysis The determination of the components of an unknown sample.

7. Quantitative analysis The determination of the quantity of the components in a sample.

8. AnalyticalScience Organic Chemistry Materials Science MedicineBiochemistryForensic Science Analytical Chemistry is a central science

9. Vocabulary Accuracy Precision Analyte Blank Concentration Calibration Standard Addition Standardisation Detection Limit Interference Internal Standard Masking Matrix

10. Standard Sample Primary Standard Reagent Sensitivity Method Technique Validation

11. Method: is the technique that used to extract, determine the type and the concentration of the analyte.

12. Accuracy: The accuracy of an analytical measurement is how close a result comes to the true value. Determining the accuracy of a measurement usually requires calibration of the analytical method with a known standard.standard Precision Precision is the reproducibility of multiple measurements and is usually described by the standard deviation, standard error.

14. Sample for chemical analysis of Identify 1- Analyte 2- Sample matrix 3- Standard 4- Interference 5- Blank 6- Masking agent

15. Analyte: is a substance or chemical constituent that is of interest in an analytical procedurechemical Standard Standards are materials containing a known concentration of an analyte. They provide a reference to determine unknown concentrations or to calibrate analytical instruments.

16. Primary standard: A primary standard is a reagent that characterize by 1.High purity 2.Stability (low reactivity) 3. Low hygroscopic (hydrophobic) 4. High solubility (if used in titration)

17. Calibration Making measurements with any analytical method or instrument requires calibration to ensure the accuracy of the measurement. There are two common calibration procedures: using a standard curve, and the standard-addition method.accuracy standard curvestandard-addition method

18. Standard curve

19. Concentration : is the amount of a constituent in a known amount of mixture matrix.

20. masking agent: is a reagent used in chemical analysis which reacts with chemical species that may interfere in the analysis.reagent chemical analysis chemical species Sensitivity: of a chemical analysis method is the ability to detect the minor amount of the analyte without interference.

21. Sample matrix: refers to the components of a sample other than the analyte. The matrix can have a considerable effect on the way the analysis is conducted and the quality of the results obtained. sampleanalyte Detection limit: It is the lowest quantity of a substance that can be distinguished from the absence of that substance.

22. Blank: A blank solution is a solution containing no analyte of interest, usually used to calibrate instrumentssolution analyte Interference: An interference is a substance, other than the assayed material, that can be measured by the chosen analytical method or that can prevent the assayed material from being measured.

23. Validation: Method validation is the process used to confirm that the analytical procedure employed for a specific test is suitable for its intended use. It include Determination of 1.Detection limit 2.Accuracy 3.Precision 4.Linearity 5.Sensitivity 6.specificity

24. ECRIQ Identify the problem: translate general questions into specific questions amenable to being answered through chemical measurements. Selecting procedures Sampling Sample preparation Obtain a representative bulk sample from the lot. a- Extract from the bulk sample a homogeneous laboratory sample.

25. b- Convert the laboratory sample into a form suitable for analysis, which usually means dissolving the sample. Samples with a low concentration of analyte may need to be concentrated prior to analysis. c- Remove or mask species that interfere with the chemical analysis. d- Identify and Quantify the analyte in several aliquots and also characterize the structure of the unknown compounds Reporting and interpretation