2. RESISTOR A. Open your Titlebox
B. Erase EVERYTHING on the screen (border, text)
C. Draw the Resistor
1. GRID .125
2. SNAP .125
3. Draw as shown above
4. LINE
5. TRIM
Do not include words or dimensions
SAVEAS (not SAVE) Resistor
Erase the Resistor, and draw the Electronic Symbol on the next slide

3. METER GRID .125 SNAP .125 1. Draw as shown above 2. Trim 3. Line
5. PL
6. Click (Start of Arrow head)
7. W
9. 0
10. Aim towards direction of arrow point
Do not include words or dimensions
SAVEAS (not SAVE) Meter
Erase the Meter, and draw the
Electronic Symbol on the next slide

4. TRANSISTOR GRID .125 SNAP .125 1. Draw as shown 2. Arrow Head - PL
3. Click (Start of Arrow head – thick end)
4. W
6. 0
7. Aim towards direction of arrow point
Do not include words or dimensions
SAVEAS (not SAVE) Transistor
Erase the Transistor, and draw the Electronic Symbol on the next slide

5. ELECTROLYTIC CAPACITOR
GRID .125
SNAP .125
ELECTROLYTIC CAPACITOR
2. Trim
1. Draw as shown above
3. Line (Plus sign)
Do not include words or dimensions
SAVEAS (not SAVE) Electrolytic Capacitor
Erase the Electrolytic Capacitor, and draw the Electronic Symbol on the next slide

6. SWITCH GRID .125 SNAP .125 2. Trim 1. Draw as shown above
Draw Line on the end
Offset twice
3. Offset .125
Do not include words or dimensions
SAVEAS (not SAVE) Switch
Erase the Switch, and draw the Electronic Symbol on the next slide
6. Trim

7. BATTERY GRID .125 SNAP .125 1. Draw as shown above
Do not include words or dimensions
SAVEAS (not SAVE) Battery
Erase the Battery, and draw the Electronic Symbol on the next slide

8. CONNECTOR GRID .125 SNAP .125 Donut Inside diameter 0.000
Outside diameter .25
Do not include words or dimensions
SAVEAS (not SAVE) Connector
Erase the Connector, and draw the Electronic Symbol on the next slide

9. SPEAKER GRID .125 SNAP .125 2. Trim 1. Draw as shown above 3. Line
4. Offset
5. Erase outside lines
Do not include words or dimensions
SAVEAS (not SAVE) Speaker
Erase the Speaker, and draw the Electronic Symbol on the next slide

10. PHOTO CELL GRID .125 SNAP .125 1. Open Resistor drawing
Move Circle to the right.
(Center of circle to midpoint of the resistor Line)
2. Circle
4. Two Lines
2. Arrow Heads - PL
3. Click (Start of Arrow head – point end)
4. W
5. 0
7. Aim towards thick end of arrow point
Do not include words or dimensions
SAVEAS (not SAVE) Photo Cell
Erase the Photo Cell, and draw the
Electronic Symbol on the next slide

11. EAR PHONE GRID .125 SNAP .125 1. Arc 2. Arc 3. Copy 4. Lines 5. Trim
7. Circles
Do not include words or dimensions
SAVEAS (not SAVE) Ear Phone
Erase the Ear Phone, and draw the
Electronic Symbol on the next slide
8. Trim
9. Arc and Lines

12. ANTENNA GRID .125 SNAP .125 Do not include words or dimensions
SAVEAS (not SAVE) Antenna
Erase the Antenna, and draw the Electronic Symbol on the next slide

13. NAND GATE GRID .125 SNAP .125 1. Draw as shown above 2. Trim
Do not include words or dimensions
SAVEAS (not SAVE) Nand Gate
Erase the Nand Gate, and draw the Electronic Symbol on the next slide

14. DIODE GRID .125 SNAP .125 Arrow Head – 1. PL
2. Click (Start of Arrow head – point end)
3. W
4. 0 (zero)
6. Aim towards thick end of arrow point
1. Draw as shown above
Do not include words or dimensions
SAVEAS (not SAVE) Diode
Erase the Diode, and draw the Electronic Symbol on the next slide

15. LED GRID .125 SNAP .125 1. Open Diode drawing 2. Circle 3. Line
Arrow Head –
1. PL
2. Click (Start of Arrow head – point end)
3. W
4. 0 (zero)
6. Aim towards thick end of arrow point
Do not include words or dimensions
SAVEAS (not SAVE) LED
Erase the LED, and draw the
Electronic Symbol on the next slide

16. TUNING CONTROL GRID .125 SNAP .125 1. Lines, Arc Arrow Head – 1. PL
2. Click (Start of Arrow head – point end)
3. W
4. 0 (zero)
6. Aim towards thick end of arrow point
Do not include words or dimensions
SAVEAS (not SAVE) Tuning Control
Erase the Tuning Control, and draw the
Electronic Symbol on the next slide

17. LAMP GRID .125 SNAP .125 2. Trim 1. Draw as shown above
Do not include words or dimensions
SAVEAS (not SAVE) Lamp
Draw the Library boxes on the next slide
Insert all symbols in the boxes as shown and label

18. DO NOT DRAW ITEMS IN RED