1. COCOA Disassembly Manual CKT Technical Dept. 2013/04/01

3. 1. Before disassembly COCOA, please Ensure ESD connect ground very well

4. Disassembling Procedures 2.Take off the battery cover, pay attention the red arrow is the start point

5. 2. Take out the battery, and then remove 4 screws

6. 4. Separate the back housing, the big red arrow is the start point, open the back housing as below picture

7. 5. Open the speaker FPC connector, LCD FPC connector and touch screen FPC connector as below picture. pay attention, under the FPC U1 IC has glue stick on PCBA, when remove it from the PCBA, please take more careful.

8. 6. Remove these two screws, and take PCBA out as below, when take PCBA from the front housing, please from the right side to start.

9. 7. Take LCD out from front housing, first step, remove the touch screen FPC, from the right up side to start.

10. 8. Take off the camera connector, and take the camera out from the plastic, pay attention, under the camera have some glue stick on the plastic,when remove the camera, please be careful. If necessary take off the power key FPC, have to be careful peel the key out of plastic as below picture.

11. 9. take speaker frame,and then Remove speaker.

12. 10. All components Display. Reverse the steps 1~9 for assembly.