9. Command: _insert  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: 65,40  Command:

10. “Block”-ul patrulater

12. Command: _insert  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: x  Specify X scale factor: 2  Specify insertion point: 50,80  Command:

13. Command: _insert  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: s  Specify scale factor for XYZ axes: 1.3  Specify insertion point: 50,30  Command:

15. Command: _insert  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: x  Specify X scale factor: 1.5  Specify insertion point: 50,70  Command:

17. Command: _insert  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: y  Specify Y scale factor: 1.5  Specify insertion point: 50,30  Command:

19. Command: _insert  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: r  Specify rotation angle: 45  Specify insertion point: 50,30  Command:

20. Command: -block  Enter block name or [?]: simb-rug  Specify insertion base point: 50,40  Select objects: 1 found Select objects: 1 found, 2 total Select objects:  Command:

22. Command: -attdef  Current attribute modes: Invisible=N Constant=N Verify=N Preset=N Enter an option to change [Invisible/Constant/Verify/Preset] :  Enter attribute tag name: rug  Enter attribute prompt: Valoare  Enter default attribute value:  Current text style: "Standard" Text height: 2.5 Specify start point of text or [Justify/Style]: 24,75  Specify height : 10  Specify rotation angle of text :  Command:

23. Command: -attedit  Edit attributes one at a time? [Yes/No] :  Enter block name specification :  Enter attribute tag specification :  Enter attribute value specification :  Select Attributes:  1 found Select Attributes:  1 attributes selected. Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] : v  Enter type of value modification [Change/Replace] :  Enter new attribute value: Ra6,3  Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] :  Command:

24. Command: -attedit  Edit attributes one at a time? [Yes/No] :  Enter block name specification :  Enter attribute tag specification :  Enter attribute value specification :  Select Attributes:  1 found Select Attributes:  1 attributes selected. Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] : s  Enter new text style : A2008  Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] : c  Enter new color name or value : 5  Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] :  Command:

25. Command: -attedit  Edit attributes one at a time? [Yes/No] :  Enter block name specification :  Enter attribute tag specification :  Enter attribute value specification :  Select Attributes:  1 found Select Attributes:  1 attributes selected. Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] : p  Specify new text insertion point : @-20,0  Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] :  Command:

28. Command: -attedit  Edit attributes one at a time? [Yes/No] :  Enter block name specification :  Enter attribute tag specification :  Enter attribute value specification :  Select Attributes:  1 found Select Attributes:  1 attributes selected. Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] : a  Specify new rotation angle : 0

29. Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] : p  Specify new text insertion point : 55,30  Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] :  Command:

30. Command: -attdef  Current attribute modes:  Invisible=N Constant=N Verify=N Preset=N Lock position=Y Enter an option to change [Invisible/Constant/Verify/Preset/Lock position] :  Enter attribute tag name: Des  Enter attribute prompt: Desenat  Enter default attribute value: Current text style: "A508" Text height: 5.0000 Specify start point of text or [Justify/Style]: 2,1  Specify rotation angle of text :  Command:

31. Command:  -ATTDEF Current attribute modes:  Invisible=N Constant=N Verify=N Preset=N Lock position=Y Enter an option to change [Invisible/Constant/Verify/Preset/Lock position] :  Enter attribute tag name: Data  Enter attribute prompt: Finalzare  Enter default attribute value:  Current text style: "A508" Text height: 5.0000 Specify start point of text or [Justify/Style]: 67,1  Specify rotation angle of text :  Command:

32. -ATTDEF Current attribute modes:  Invisible=N Constant=N Verify=N Preset=N Lock position=Y Enter an option to change [Invisible/Constant/Verify/Preset/Lock position] :  Enter attribute tag name: Ver  Enter attribute prompt: Verificat  Enter default attribute value:  Current text style: "A508" Text height: 5.0000 Specify start point of text or [Justify/Style]: 107,1  Specify rotation angle of text :  Command:

33. Command: -block  Enter block name or [?]: indic  Specify insertion base point: 170,0  Select objects: w  Specify first corner: -5,-5  Specify opposite corner: 175,15  9 found Select objects:  Command: Command: -insert  Enter block name or [?] : indic  Units: Millimeters Conversion: 1.0000  Specify insertion point or [Basepoint/Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: 170,0  Enter X scale factor, specify opposite corner, or [Corner/XYZ] :  Enter Y scale factor :  Specify rotation angle :  Enter attribute values Verificat: Popescu Nicolae  Finalizare: 20.03.2006  Desenat: Pop Gheorghe  Command:

35. Command: m  MOVE Select objects:  1 found Select objects: 

36. Command: m  MOVE Select objects:  1 found Select objects:  Specify base point or [Displacement] : end  of Specify second point or : cen  of

37. Command: m  MOVE Select objects:  1 found Select objects: Specify base point or [Displacement] :  Specify displacement : 120,50  Command:

38. Command: m  MOVE Select objects:  1 found Select objects:  Specify base point or [Displacement] : cen  of Specify second point or : @0,-40  Command:

40. Command: ro  ROTATE Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0 Select objects:  1 found Select objects:  Specify base point: 80,60  Specify rotation angle or [Copy/Reference] : 60  Command:

42. Command: _stretch  Select objects to stretch by crossing-window or crossing-polygon... Select objects: c  Specify first corner: Specify opposite corner:  1 found Select objects:  Specify base point or [Displacement] : x,y  Specify second point or : @20,0  Command:

44. Command: _scale  Select objects: 1  found Select objects:  Specify base point: end  Of  [varful din stanga jos]  Specify scale factor or [Copy/Reference] : 1.5  Command:

45. Command: _scale  Select objects:  1 found Select objects:  Specify base point: 0,0  Specify scale factor or [Copy/Reference] : 1.5  Command:

59. Command: _dimlinear  Specify first extension line origin or : Specify second extension line origin: Specify dimension line location or x,y  [Mtext/Text/Angle/Horizontal/Vertical/Rotated]:  Dimension text = 80 Command: _dimlinear  Specify first extension line origin or : Specify second extension line origin: Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]:  Dimension text = 40 Command:

64. Command: _dimlinear  Specify first extension line origin or :  Specify second extension line origin:  Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: T  Enter dimension text : 39  Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]:  Dimension text = 40 Command:

66. Command: _dimlinear  Specify first extension line origin or :  Specify second extension line origin:  Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: A  Specify angle of dimension text: 30  Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: x,y  Dimension text = 80 Command:

68. Command: _dimlinear  Specify first extension line origin or :  Specify second extension line origin:  Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: R  Specify angle of dimension line : 30  Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: x,y  Dimension text = 69.28 Command:

69. Command: _dimaligned  Specify first extension line origin or :  Specify second extension line origin:  Specify dimension line location or [Mtext/Text/Angle]:  Dimension text = 47.02 Command:

70. Command: _dimlinear  Specify first extension line origin or :  Select object to dimension:  Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: x,y  Dimension text = 70 Command:

72. Command: _dimdiameter  Select arc or circle:  Dimension text = 40 Specify dimension line location or [Mtext/Text/Angle]: x1,y1  Command: _dimradius  Select arc or circle:  Dimension text = 20 Specify dimension line location or [Mtext/Text/Angle]: x2,y2  Command:

73. Command: _dimangular  Select arc, circle, line, or :  Select second line:  Specify dimension arc line location or [Mtext/Text/Angle]: x,y  Dimension text = 34 Command:

74. Command: _dimlinear  Specify first extension line origin or :  Specify second extension line origin:  Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: x,y  Dimension text = 70 Command:

79. Command: _dimedit  Enter type of dimension editing [Home/New/Rotate/Oblique] : N  Select objects:  1 found Select objects:  Command:

80. Command: _dimtedit  Select Dimension:  Specify new location for dimension text or [Left/Right/Center/Home/Angle]: x,y  Command:

81. Command: _dimedit  Enter type of dimension editing [Home/New/Rotate/Oblique] : O  Select objects:  1 found Select objects:  Enter obliquing angle (press ENTER for none): -60  Command: