1. Fostering worldwide interoperabilityGeneva, 13-16 July 2009 Home Networking activities in TTC KENJI KORO TTC Next-Generation Home Network system WG Global Standards Collaboration (GSC) 14 DOCUMENT #:GSC14-GTSC-027 FOR:Presentation SOURCE:TTC AGENDA ITEM:4.3: Home Networking CONTACT(S):Kenji KORO

2. Fostering worldwide interoperability 2 Geneva, 13-16 July 2009 Standardization about Home Networking (HN) in Japan Now on initial stage of standardization QoS: Investigated several existing recommendations Data Model: Analyzed dependencies on applications Operation: Analyzed the functional requirement Research: Applications realized in NGN Research the physical interface including 802.XX, access point base station(Femto) and ZigBee. Plan to submit proposal to ITU-T SG15, SG16,etc. Cooperation with the related SDOs and Fora ITU-T, HGI, BB-Forum, DLNA, UPnP, etc. Cooperation in Japan Next Generation IP Network Promotion Forum in Japan: Home Network WG: Research technical demands HATS[1] in Japan Established new WG for interconnection verification Highlight of Current Activities Note[1]: Non profit organizations for inter-operability http://www.ciaj.or.jp/hats/e/what/about.html

3. Fostering worldwide interoperability 3 Geneva, 13-16 July 2009 Architectures have been proposed by several bodies such as ITU and Fora. But there are no consistent suite of Recommendations from WAN to HN dealing with the following items. Maintenance (In case of the problems or failure has occurred) Device setting Device composition confirmation In Layer 2/3, there are many candidate protocols. But for the management of home device, some modification will be required. Isn't cooperation necessary on this respect among PSOs? Strategic Direction

4. Fostering worldwide interoperability 4 Geneva, 13-16 July 2009 Conduct systematic technical test composed of WAN, Access, Home-GW, and Intra-HN in close cooperation with Fora in Japan. Operation from WAN to HN Energy saving in the HN Home Security Cable application Confirm total interoperability. Examination of device list in HN Examination of a model in HN Cooperation items with other standardization bodies Data models Appliance device control (TV etc.) Challenges

5. Fostering worldwide interoperability 5 Geneva, 13-16 July 2009 Define the control and operation specifications for related use cases. NGN application Contents transmission/reception Click to Call Multi-media communication Etc. Network consumer electronic devices management Maintenance Device setting Device composition confirmation Confirm total interoperability. WAN to HN operational interoperability test in HATS Next Steps/Actions

6. Fostering worldwide interoperability 6 Geneva, 13-16 July 2009 Supplementary Slides

7. Fostering worldwide interoperability 7 Geneva, 13-16 July 2009 This figure shows the control and operation in HN The control and operation in HN SONY PS3 TV Nintendo Wii wifi port DVD recorder PC note port2port4port1 port6 port3 port4 Visible composition image Grasp of connected equipment/composition User Operations Far end services NW Support Center AGW Quality measurement Quality measurement Connected confirmation Range of examination of standardization Maintenance (In case of the problems or failure has occurred) Device setting AGW: Access Gate WAY Network Devices First Target

8. Fostering worldwide interoperability 8 Geneva, 13-16 July 2009 Requirement for HN/ Technology Service requirementsEND-Devices (including AGW)Network device (including AGW) Grasp of connected equipment/ composition Specific of end terminal and LAN equipment Notification of equipment information Collection/accumulation of equipment information Specific of HN composition Notification of composition information For trouble/ prevention Connected confirmation Responds to connected confirmation. Confirmation of connectivity such as rink information. Watch and abnormal detection Notification when abnormality occurs Acknowledge to the polling demand. Device setting Setting, operation and confirmation Responds to operation (log) confirmation. The event (log) to AGW. Setting and initialization, firmware update and restart The command is executed, and the result is returned. Quality measurement Send quality value confirmation. Acknowledge to the quality value confirmation. Packet count at each port/flow Field strength/modulation method (For the wireless and PLC) Bandwidth etc. Priority

9. Fostering worldwide interoperability 9 Geneva, 13-16 July 2009 L2/L3 Protocols Functional Requirement Candidate Protocols L2 （ To LAN devices ） L3 （ End Devices ） Notification of equipment information Notification of MAC address table LLTD (IEEE) LLDP (MS) UPnP or + Enhancing NetBIOS or + Enhancing DHCP Vendor code Enhancing ICMP echo body Enhancing TR-069 or + Enhancing SNMP

10. Fostering worldwide interoperability 10 Geneva, 13-16 July 2009 PHY/MAC layer Technologies Bit RateMultipoint Cable Coax. Cable Power line Phone line Ether Cable G.hn 1Gbps (Coax, Phone ） 300Mbps (Power Line) YES HomePlug AV 300Mbps YES HD PLC UPA MoCA1.1 250Mbps YES 1x16 points YES HPNA3.0320Mbps YES Ethernet1Gbps No （ Use HUB ） YES