1. Dec 4, 2007 Reliable Multicast Group Neelofer T. CMSC 621

2. What is Reliable Multicasting? Reliability could mean messages are delivered: –To each process –In same order –In timely manner –No duplicates Ensure reliability when –Processes enter/leave the group –Processes fail while communicating

3. Small Scale Group For small scale group: –Reliable, connection oriented, point-to-point connections are feasible –Messages have sequence numbers –Messages received in order –Receivers acknowledge messages –Request retransmission of missing messages –Sender keeps message in buffer till acknowledgement received

5. Large Scale Group Issues with simple ACK based, point to point approach: –Feedback implosion –Receivers spread over WANs –Congestion due to repair messages

6. Reliable Multicasting Challenges Reliable multicasting can cause more network congestion: –Than unicast group, because large amounts of data are transmitted to recipients distribute over WAN –Than unreliable multicast group, because of additional control messages ensuring reliability Protocol –TCP is point-to-point –Multicast is not connection oriented –UDP does not provide reliability –Applications have to offer reliability (over UDP)

7. NACK based approach Receiver sends feedback only for missing message Issues: –No guarantee of removal of feedback implosion –Sender is not aware of message having been delivered to entire group –Sender forced to keep transmitted messages in buffer “forever” to resolve retransmission requests

8. Non-Hierarchical Feedback control Approach: –Message loss detected by wide area application –Receivers only report missing messages –Feedback is multicast to group –Any other message will then suppress its feedback for the same message –Retransmission request is thus sent after random delay Strengths: –Controls feedback implosion, thus scaling well

9. Weaknesses: –Synchronizing feedback of multiple receivers requires scheduling or timers across the WAN –Multicast feedback affects processes which have received the message

10. SRM (Scalable Reliable Multicast) Improves scalability of Non hierarchical feedback control Receivers help each other Receiver multicasts retransmission request after a specific time period Closest neighbor with requested data will multicast the message Distant neighbors timeout later than the closest ones If data is not retransmitted by any other node when a node timesout, then a node multicasts the data All nodes are required to cache data

11. Hierarchical Feedback Control RMTP (reliable multicast transport protocol) Receivers partitioned into sub groups Group has only one sender Sub groups are subsequently organized as a tree Sender’s sub group forms the tree node Designated receivers act as coordinators for sub-groups Any reliable multicast protocol used for each sub group with the DR being a virtual sender DR maintains local buffer DR sends retransmission request for missing message to parent node’s DR DRs retransmit data to sub-group DR deletes message from buffer when all receivers in sub groups and all children acknowledge it

13. Advantages: –Scales well –Hierarchy of DRs reduces load on original sender Issues: –Tree construction –Trees also need to be modified dynamically –Implementing an approach to use any existing underlying network tree is not easy

14. PGM (Pragmatic General Multicast) Routers act as Designated receivers Hence easy to scale Simple NACK based protocol NACKs are unicast from receiver to nearsest router to routers along the way to the sender Sliding window of cached data at sender discarded after a time duration Ensures that all receivers can get reliable, ordered, duplicate data or can detect message loss Suited for applications where messages can join and leave group at any time

15. MFTP (Multicast FTP) Approach: –Provides reliable multicast of bulk data transfer without time constraint –Similar to RMTP –Also includes group setup protocol –Packet size is as large as possible with each packet having multiple data packets –Receivers collect all NACKs together and send to sender –Sender resends only the packets that were NACKed by all receivers, in second pass –Process continues till all receivers have all packets

16. Advantages: –Minimum control message flow –Data is sent at the rate of the network capacity –Scales well –Supports one hop networks like satellite networks too with high scalability Weakness –Cannot be used for applications like high timing constraints

17. ALC with FEC Receiver applications belong to various layers based on their data transfer rates Sender creates and sends packets based on the receiver’s data rate Receiver initiates communication and reconstructs objects from the packets Receivers join channels to receive data Parity packets generated which are used for repairs only On an average provides 2:1 load reduction due to congestion control

18. Atomic Multicast Reliability in presence of process failures: –Messages sent to all processes or none –All messages sent in same order to all processes When a process crashes while processing a message, all the remaining processes: –Either process the message –OR Discard it When the crashed process comes up: –No more processes are multicast till that process is completes registration with the group –Newly registered process is easily updated with the group state

19. Virtual Synchrony A message is associated with the group view of the sender Group view is the list of processes the sender had when multicasting the message All processes in the group have the same view View changes when a process enters or leaves the group No multicast can pass across a view change All messages in transit when a view change takes place are either completed before the change takes effect or disacrded

21. Message Ordering Unordered multicasts –Messages can be delivered in any order

22. FIFO-ordered multicasts –Messages from same process delivered in same order

23. Causally-ordered multicasts –Message causality is maintained –Can be implemented using vector timestamps Totally-ordered multicasts –Messages to all group members delivered in same order –Ordering of messages from a sender can be in any one of the above three ways

24. Conclusion Scalable reliable multicast with congestion control is an active research area for the Reliable Multicast Research Group (RMRG) in the Internet Research Task Force (IRTF) One of the reliability constraints is usually sacrificed Protocols used based on application needs Sender initiated protocols –Do not scale well –Have lower throughput –End to end latency worsens –Has to maintain state for receivers

25. References Tanenbaum and Steen, “Distributed Systems Principles and Paradigms” Internet Research Task Force, Reliable Multicast Research Group http://www.irtf.org/charter?gtype=old-rg&group=rmrg Adamson et al, “NACK-Oriented Reliable Multicast Protocol (NORM)”, RFC 3940 Adamson et al, “NACK-Oriented Reliable Multicast Protocol (NORM)”, Internet draft draft-ietf-rmt-pi-norm-00.txt Speakman et al,“PGM Reliable Transport Protocol Specification”, RFC 3208 Luby et al, “Asynchronous Layered Coding (ALC) Protocol Instantiation”, Internet draft draft-ietf-rmt-pi-alc-revised-05.txt Appala, Austen, “AN EVALUATION OF RELIABLE MULTICAST PROTOCOLS”, Proc. IEEE Southeastcon, pp. 165-168, 1999

26. Adamson, Roca, “Security and Reliable Multicast Transport Protocols: Discussions and Guidelines”, Internet draft draft-ietf-rmt-sec-discussion-00.txt Paul, S., Sabnani, K. K., Lin, J. C., and Bhattacharyya, S. “Reliable Multicast Transport Protocol (RMTP)” IEEE Journal on Selected Areas in Communications, April 1997 Peled and Vardi, “Formal Techniques for Networked and Distributed Systems” http://rmt.motlabs.com/ C. Kenneth Miller, “Reliable Multicast Protocols and Applications”, The Internet Protocol Journal - Volume 1, No. 2 Gemmel et al, “The PGM Reliable Multicast Protocol” Wu, “Verification analysis of Reliable Multicast protocol”

27. ???