1. GENERAL INDUSTRY SAFETY TEST

2. What does OSHA stand for? 1.Occupational Safety and Health Administration 2.Occupational Safety and Help Administration 3.Occupational Safety and Health Association 4.Occupational Safety Heart Association

3. What year was OSHA established? 1.1920 2.1950 3.1980 4.1970

4. When you have a company that has ____ or more employees you must maintain records of occupational injuries and illnesses. 1.5 2.15 3.11 4.25

5. What is a PPE? 1.Personal Protective Equipment 2.Personal Protective Evaluation 3.Protective Protection for Employees 4.Positive Person Evaluation

6. What does MSDS represent? 1.Material Data Safety Sheets 2.Material Safety Data Sheets 3.Miner Safety Dental Sheets 4.None of the above

7. Top rails must be at least _______ inches off the road. 1.12 2.42 3.30 4.29

8. Floor openings larger than ______inches must be covered to prevent people from falling through the hole. 1.6 2.8 3.12 4.18

9. The distance between the wheel and adjustable grinder must never exceed ______ inches. 1.1/8 2.¼ 3.½ 4.¾

10. A qualified person is someone that is ______________involved. 1.Familiar with hazards 2.Paid professional 3.Anyone 4.No one

11. A ___________________guard is a barrier, a permanent part on the machine, preferable to all other types of guards. 1.Interlocked 2.Adjustable 3.Self-adjusting 4.Fixed

12. Which of the following could result in an accident? 1.Use of over-the-counter medication 2.Lack of communication 3.Poor work habits 4.Inadequate training 5.All of the above

13. Which behaviors can help reduce the chances of an accident to occur on a job? 1.Keeping the area free of debris 2.Cleaning up spilled liquids 3.Cleaning tools and equipment 4.Labeling materials and supplies 5.All of the above

14. Which muscles are the best to use to lift an object safely? 1.Arm muscles 2.Back muscles 3.Leg muscles 4.Arm and back muscles

15. You need to get to the other side of a trench. What is the safest way to do it? 1.Walk around it 2.Jump over it if no one is in it 3.Step over it 4.Place a board across it and use it as a bridge

16. Which of these documents should be available at all times to the workers on a job? 1.Material safety data sheets 2.HAZCOM document 3.OSHA Itinerary 4.EPA Impact Statement

17. When you are going to step off a ladder onto a platform or a roof, how far should the top of the ladder extend above the point where the ladder contacts the structure? 1.At least 3 feet 2.At least 2 feet 3.At least 1 foot 4.At least 6 inches

18. Select all of the choices that are true about electricity. 1.It can pass through the air for short distances. 2.It cannot pass through the air. 3.It can flow through the human body. 4.It can only flow through various metals.

19. Which of the following could be a result from an electric accident? 1.Burns 2.Explosions 3.Fire 4.Death 5.All of the above

20. What is the best way to lift an object? 1.Keep your back bent and chin tucked in. 2.Keep your back bent and both feet together. 3.Keep your back straight and lift with your legs. 4.Keep your back straight and your feet close together

21. All of the following devices are locked and tagged to protect workers from potential sources of energy True or False 1.Circuit breakers 2.Switches 3.Valves 4.Hand tools

22. All of the following elements are needed at the same time in order for a fire to start EXCEPT 1.Carbon monoxide 2.Fuel 3.Oxygen 4.Heat

23. The first face masks were made out of ______ 1.Paper 2.Wood 3.Animal kidney 4.Animal bladder

24. Worksite analysis 1.Identify the problem 2.Cause the problem 3.Analyze how the situation affects the worker 4.Both a and c

25. How does OSHA help? 1.Drug screening 2.Free food 3.Training and Education 4.None of the above

26. How must chemicals be labeled? 1.Identify of the chemical 2.Appropriate hazard warnings 3.Name and address of the responsible part 4.All of the above

27. What do the letters GFCI represent? 1.Ground Fault Circuit Interrupter 2.Ground Fault Interrupter 3.Grounding Face Circuit Interrupter 4.None of the above

28. A qualified person is someone that is ______________involved. 1.Familiar with the hazards 2.Paid professional 3.Anyone 4.No one

29. A ____________________guard is a barrier-a permanent part of the machine, preferable to all other types of guards. 1.Interlocked 2.Adjustable 3.Self-adjusting 4.Fixed

30. Employees subjected to electrical shock and burns are required to wear protective helmets. True False

31. Exit signs, when required, shall be lettered in red letters, not less than 6 inches high. True False

32. Caution signs shall be used only where an immediate hazard exists. True False