1. Safe Manual Handling Techniques
A guide to…
Safe Manual Handling Techniques

2. Aim of this presentation
The Manual Handling Operations Regulations 1992, as amended in 2002, apply to a wide range of manual handling activities, including lifting, lowering, pushing, pulling or carrying.
The load may be either inanimate - such as a box or a trolley, or animate - a person or an animal.

3. What’s the problem?
Manual handling injuries affect around 1.1 million people per year
An estimated 9.3 million working days a year are lost due to work-related Musculoskeletal Disorders (MSDs)
On average 1.1 million people in Great Britain suffer from MSDs caused or made worse by their current or past work.
An estimated 9.3 million working days were lost due to these work-related MSDs, on average each sufferer took about 20 days off in that 12 month period.

4. Musculoskeletal Disorders
Poor manual handling can cause Musculoskeletal Disorders (MSDs) which include problems such as low back pain, joint injuries and repetitive strain injuries.
You can do things to prevent or minimise MSDs as they affect large numbers of people across most industries and occupations and have the potential to ruin people's lives. MSDs also impose heavy costs on employers.
CASE STUDY: In one year a firm lost 373 working days because of manual handling injuries. This cost about £ in wages paid to absent workers. There were also overtime payments and other costs. The introduction of handling aids, manual handling training, and a rehabilitation program reduced days lost to 74 and wage costs to about £5000.

5. Manual Handling Risks Some of the main areas that cause risks include:
Repetitive & Heavy Lifting
Bending & Twisting
Repeating an action too frequently
An uncomfortable working position

6. What should you do about it?
Consider
Consider the risks from manual handling to the health and safety of employees.
Consult
Consider the risks from manual handling to the health and safety of employees. If there are risks, the regulations apply.
Consult and involve the workforce. Employees and representatives know first hand what the risks in the workplace are, so they can probably offer practical solutions to controlling them.
Consult and involve the workforce.

7. Avoid Assess Reduce Employer Duties The need for hazardous
manual handling
The risk of injury from any hazardous manual handling
The risk of injury from hazardous manual handling
Avoid the need for hazardous manual handling, so far as is reasonably practicable
Assess the risk of injury from any hazardous manual handling that can’t be avoided
Reduce the risk of injury from hazardous manual handling, so far as is reasonably practicable

8. Employee Duties Employees have duties too!
Inform the employer of any hazardous activities
Follow appropriate safe systems of work laid down for their safety
Make proper use of equipment provided for their safety
Ensure activities do not put others at risk

9. ? ? ? Avoiding Manual Handling
Check whether you need to move it at all… ?
Does a large work piece really need to be moved, or can the activity be done safely where it already is? ?
Can you take the treatment to the patient, not vice versa? ?
Can raw materials be piped to their point of use?

10. Avoiding Manual Handling
Think about using handling aids…
Hoists
Conveyors
Lift Trucks
Pallet Trucks

11. Think before lifting/handling
Good Handling Techniques - Lifting
Think before lifting and handling
Think before lifting/handling
Is help needed with the load?
Can handling aids be used?
It’s important to plan the lift and consider whether handling aids can be used instead of manual handling. Where is the load going to be placed? Will help be needed with the load? Remove obstructions such as discarded packaging materials. For a long lift consider resting the load midway on a table or bench to change grip.
Where will the load be placed?

12. Good Handling Techniques - Lifting
Keep the load close to the waist with the heaviest side next to the body
Keep the load close to the body for as long as possible while lifting. Keep the heaviest side of the load next to the body. If a close approach to the load is not possible, try to slide it towards the body before attempting to lift it.

13. Good Handling Techniques - Lifting
Adopt a stable position with feet apart and one leg slightly forward to maintain balance
Adopt a stable position – the feet should be apart with one leg slightly forward to maintain balance (alongside the load if it is on the ground). The worker should be prepared to move their feet during the lift to maintain stability. Avoid tight clothing or unsuitable footwear that could make this difficult.
Get a good hold – where possible the load should be hugged as close as possible to the body. This may be better than gripping it tightly with the hands only.
Start in a good posture – At the start of the lift, slight bending of the back, hips and knees is preferable to fully flexing the back (stooping) or fully flexing the knees and hips (squatting).
Get a good hold and start in a good posture

14. Good Handling Techniques - Lifting
Avoid twisting the back or leaning sideways
Avoid twisting the back or leaning sideways, especially while the back is bent. Shoulders should be kept level and facing in the same direction as the hips. Turning by moving the feet is better than twisting and lifting at the same time.
Don’t flex the back any further while lifting. This can happen if the legs begin to straighten before starting to raise the load.
Don’t flex the back any further while lifting

15. Good Handling Techniques - Lifting
Keep the head up when handling
Move smoothly and don’t lift or handle more than can be easily managed
Keep the head up when handling. Once the load is held securely, look ahead and not down at the load.
Move smoothly. The load should not be jerked or snatched as this can make it harder to keep control and can increase the risk of injury.
Don’t lift or handle more than can be easily managed – There is a difference between what people can lift and what they can safely lift. If in doubt, seek advice or get help.

16. Good Handling Techniques - Lifting
Put the load down, then adjust. Slide into desired position
Put down, then adjust – if precise positioning of the load is necessary, put it down first, then slide it into the desired position.

17. General Risk Assessment Guidelines
There is no such thing as a completely ‘safe’ manual handling operation. But working within the following guidelines will cut the risk and reduce the need for a more detailed risk assessment.
Use the diagram to make a quick and easy assessment. Each box contains a guideline weight for lowering and lifting in that zone. As you can see the guideline weights are reduced if handling is done with arms extended, or at high or low levels, as this is where injury is most likely to occur.
The guideline weights assume that the load is readily grasped with both hands and that the operation takes place in reasonable working conditions, with the lifter in a stable position.
Source: HSE