1. Magnetic Property Measurement System MPMS XL

2. Configurations MPMS XL is offered in 2 configurations MPMS XL-5 (5 Tesla) MPMS XL-7 (7 Tesla)

3. Principal components of this measurement system
Temperature Control System ( 1.7 K to 400 K)
Magnet Control System ( ± 5 T)
Sample Handling System
Computer Operating System
Super conducting SQUID Amplifier System

4. Sample rod
Sample rotator
Sample transport
Probe assembly
He level Sensor
Superconducting Solenoid
Flow Impedance
Squid capsule with magnetic shield
Superconducting pick-up coil

5. 10. Dewar Isolation cabinet
12. Printer
13. Magnetic power supply
14. Temp. controller
15. Console Cabinet
16. Power distribution unit
17.MPMS controller
18. Gas/Magnet control
unit
19. Computer
20. Monitor

7. Specifications of MPMS XL-5 Field =5 Tesla Temperature=1
Specifications of MPMS XL-5 Field =5 Tesla Temperature=1.7K to 400 K Sweeping rate=0.001K to 10K/Min

8. Possible Measurements
Magnetization vs. Temperature (M vs. T):Default settings: 300K-10K, Temperature interval 5K Zero Field Cooling Field Cooling AC Susceptibility
Magnetization vs. Field (M vs. H):Default settings: -5T to +5T step size 0.5T Hysteresis
Hysteresis

9. Features of MPMS MultiVu Software
Simultaneous Access to all aspects of system operation: sequence setup,data analysis,data display
Enables multiple documents and view to be visible and useable at the same time
Simultaneous display of data files in multiple formats (e.g.. Graphs vs. texts)
Automated Background Subtraction

11. Sample should be submitted only on Friday
Limitations
Measurement of hysteresis at more than two temperatures is considered as II sample
Measurement below 10K also considered as II sample (because it is necessary for the instrument to be stable at 10K at least for 1 hour before going below 10K)
Sample should be submitted only on Friday

12. Total Number of Measurements Done
Total Number of Working days =
Total =
Physics =
SSCU =
MRC =
ISU =
Metallurgy =
Outside =
IPC =