1. PBv2.x Pen F/W Upgrade SOP WWPM_Brian Hung 2011/12/21

2. 1. Plug the H/W tool to PC via USB port. The H/W tool only support Windows XP!!

3. 1. Find the device from device manager 2. Browse the folder of “WinXP driver” to update the driver. Install H/W Tool Driver

4. Install F/W Upgrade Program 1. Execute “FET-Pro430-Setup.exe“ and finish the installation process

5. 1. Turn off the PB. 2. Connect the PB to H/W tool.

6. 1. Execute “Lite FETPro430”

7. 1. Change the setting as the figure.

8. 1. Change the “Memory Options“ as the figure.

9. 1. Change the “Connection/Device Reset“ as the figure.

10. 1. Click “Open Code File” and choose correct F/W file.

11. 1. Click “AUTO PROG.”.

12. 1. Check the Status is Pass 2. Check if the Check sum of source and memory are the same.