1. BIM Project Execution Planning
Ralph Kreider
Graduate Research Assistant
CIC Research Program
Penn State University
Thursday, January 11, 2012

2. BIM Project Execution Planning Procedure

3. “Begin with the end in mind.”
Identifying BIM Goals and Uses
“Begin with the end in mind.”

4. BIM Goals

5. Identifying BIM Goals and Uses

6. Identifying BIM Goals and Uses

7. Frequency and Benefit of Uses

8. Capabilities & Resources
BIM Use Selection Worksheet
BIM Use
Responsible Party
Proceed?
Capabilities & Resources
Value

9. Design BIM Project Execution Process

10. Level Two Process Maps

11. Develop Information Exchanges

12. Information Exchange Worksheet
= Output Inadequacy (Revise Information) OR
= Input Inadequacy (Revise Responsible Party)

13. Supporting Infrastructure

14. Plan Template

15. Lessons Learned
Need BIM Champion(s) Owner Involvement is Critical Need team Buy-in and Transparency The Planning Procedure should allow for Adaptations by the Project Team The Project Execution Plan must be considered a Living Document Planning takes Resources and it is Critical that Resources are Available

16. Acknowledgements Sponsors: Advisory Board Members PSU Research Team
The Charles Pankow Foundation
The Construction Industry Institute (CII)
Penn State Office of Physical Plant
The Partnership for Achieving Construction Excellence (PACE)
Industry Partners:
LACCD
Whiting Turner
Barton Malow
USACE
Clark Construction Group
GSA
Balfour Beatty
Jacobs
MA DCAM
Advisory Board Members
Dana ‘Deke’ Smith
Ed Gannon
Steve Hutsell
Kurt Maldovan
Mark Butler
Greg Gidez
Mark Konchar
Victor Sanvido
Derek Cunz
Francois Grobler
Soad Kousheshi
Alexander Zolotov
Mark Falzarano
Steve Hagan
Rob Leicht
PSU Research Team
Students:
Craig Dubler
Ralph Kreider
Chitwan Saluja
Shane Goodman
Eric Nulton
Nevena Zikic
Colleen Kasprzak
Faculty:
Chimay Anumba
Sam Hunter
John Messner

17. BIM Project Execution Planning?
BIM Project Execution Planning
Ralph Kreider
Graduate Research Assistant
CIC Research Program
Penn State University
Download the Guide at:
bim.psu.edu

18. What to do for this class
Create a PxP Template Add sections on decision making Map BIM Process Level 1 and Level 2 Map Design Process Level 1 – Project Team Level 2 – Individual Process Information Exchanges What information is required Keep it up to Date