1. Student XXX BCT 480 Hazard Recognition Site Report Date Submitted: April 14 th, 2005

2. OSHA Photo Archive, Region 4 Compressed Air Description: PVC pipe was being used to transport compressed air. Hazard: Employees were exposed to hazard of being struck by pieces of exploding PVC pipe. Standard: 5(a)(1), General Duty Clause Abatement: Replace PVC with black iron pipe. Non-Compliance

3. OSHA Photo Archive, Region 4 Excavation Description: A spoil pile was placed too close to the edge of the excavation. Hazard: Exposes employees to a possible cave-in hazard. Standard: Subpart P - 29 CFR 1926.651 (j)(2) Abatement: Spoil pile must be moved at least 2 feet from the edge of the excavation. Non-Compliance

4. constructionphotography.com Personal Protective Equipment Description: Construction worker is not properly wearing hardhat. Hazard: If the worker is struck by an object the hard hat will not be as effective as it should be. Standard: Subpart E – 29 CFR 1926.95 (c), 1926.100 (b) Abatement: Turn the hard hat around the correct way. Non-Compliance

5. OSHA Photo Archive, Region 4 Fire Hazard Description: The exit door is blocked by tables. Hazard: The exit door cannot be used in case of a fire. Standard: Subpart F – 29 CFR 1926.151 (d)(1), and (7) Abatement: Remove the tables or provide other egress and remove the exit sign. Non-Compliance

6. OSHA Photo Archive, Region 4 Poor Housekeeping Description: Accumulated debris due to poor housekeeping. Hazard: The accumulation of debris could cause serious injury. Standard: Subpart C – 29 CFR 1926.25 (a), (b), and (c) Abatement: Properly dispose of debris. Non-Compliance

7. constructionphotography.com Personal Protective Equipment Description: The worker is not wearing safety glasses while driving nails. Hazard: The worker could be seriously injured or blinded by flying objects. Standard: Subpart E – 29 CFR 1926.102 (a)(1) Abatement: The worker needs to wear safety glasses while nailing. Non-Compliance Standard: Subpart E – 29 CFR 1926.100 (a) The worker is wearing his hard hat which is in compliance.

8. OSHA Photo Archive, Region 4 Scaffold Description: Inadequate scaffold foundation. Hazard: Employees are exposed to the hazard of falling and causing serious injury. Standard: Subpart L – 29 CFR 1926.451 (c)(2), 1926.451 (c)(2)(iii) Abatement: Scaffold poles, legs, posts, frames, and uprights need to be placed on a base plate, mud sill, or another firm foundation. Non-Compliance

9. constructionphotography.com Fall Protection Description: The worker is not using a fall protection system. Hazard: The worker could be seriously injured if he was to fall. Standard: Subpart M – 29 CFR 1926.501 (b)(11) Abatement: The worker needs to be protected by a guardrail with toe boards, safety net, or a personal fall arrest system. Non-Compliance Standard: Subpart E – 29 CFR 1926.100 (a) The worker is wearing his hard hat which is in compliance.