Presentation is loading. Please wait.

Presentation is loading. Please wait.

Shaft Laser 200 With Geo 200 Geometric Measurement System.

Published byNoel Rogers Modified over 9 years ago

Similar presentations

Presentation on theme: "Shaft Laser 200 With Geo 200 Geometric Measurement System."— Presentation transcript:

1 Shaft Laser 200 With Geo 200 Geometric Measurement System

2 Geo Measurement Mounting Hardware Bore Centering Hardware (6 units) Laser mounting device Adapter rings for mounting laser mounting device to ship reduction gear. Custom designed for each reduction gear.) Receiver indexing devicesLaser mounting bracket extension arms (4)

3 Shaft 200 Alignment System with Geo 200 Geometric Measurement System Shaft Laser Sending Unit Shaft Laser Receiving Unit Mounting Hardware CPU Cables Aluminum Cases Geo Laser Sending Unit Geo Laser Receiving Unit

4 Geometric Measurement Bore Alignment Hardware Bore Alignment Adapter rings Geo Sending Unit Extension Arms and Mounting Blocks (4) Geo Receiving Unit Mounting ring

5 Geo Measurement System Mounting Cross Bars Mounting Crossbar adapters (3) Laser Mounting Rods (varying lengths up to 3’) Magnetic Mounts (2) Laser Cables (approx 150’ total) Geo System CPU Wooden Case

6 Bore Adapter Indexing Hardware (6 sets)

Download ppt "Shaft Laser 200 With Geo 200 Geometric Measurement System."

Similar presentations

Tagger and Vacuum Chamber Assembly Procedure. Outline. Assembly procedure for tagger and vacuum chamber. Support stands. Alignment.

Tagger and Vacuum Chamber Assembly Procedure. Outline. Assembly procedure for tagger and vacuum chamber. Support stands. Alignment.
WING SUPPORT CONCEPTS FOR WINGS # 2,3,6,7 AND 9 GARY MCGINNIS 09/19/2007 1 – TAPPING HOLES FOR STUDS 2 – STUD AND INSERT WELDING 3 – WELDING BRACKETS.

WING SUPPORT CONCEPTS FOR WINGS # 2,3,6,7 AND 9 GARY MCGINNIS 09/19/ – TAPPING HOLES FOR STUDS 2 – STUD AND INSERT WELDING 3 – WELDING BRACKETS.
Machining a V-Block Flexible Manufacturing Copyright © Texas Education Agency, 2013. All rights reserved. 1.

Machining a V-Block Flexible Manufacturing Copyright © Texas Education Agency, All rights reserved. 1.
Gripper Designs By Pragnay Choksi. INTRODUCTION Hands of robots referred to as Grippers No single design is ideal for all applications.

Gripper Designs By Pragnay Choksi. INTRODUCTION Hands of robots referred to as Grippers No single design is ideal for all applications.
Step 12 Here is the issue…..the mount for the throttle arm is pushed up against the side of the housing. The problem with this is it allows (due to alignment)

Step 12 Here is the issue…..the mount for the throttle arm is pushed up against the side of the housing. The problem with this is it allows (due to alignment)
Diesel Engine Components

Diesel Engine Components
piston/connecting rod assembly

piston/connecting rod assembly
MACHINE TOOL Prof. kiran gore.

MACHINE TOOL Prof. kiran gore.
L1 Support Structure Holding Fixture J. Fast 4/30/03 Revised 8/27/03.

L1 Support Structure Holding Fixture J. Fast 4/30/03 Revised 8/27/03.
Assignment#1 1. In 1989, Jason, a research-type submersible with remote TV monitoring capabilities and weighing 35 200 N, was lowered to a depth of 646.

Assignment#1 1. In 1989, Jason, a research-type submersible with remote TV monitoring capabilities and weighing N, was lowered to a depth of 646.
D Walters Undulator System June 17, 2008 1 Undulator System Components Status Dean Walters.

D Walters Undulator System June 17, Undulator System Components Status Dean Walters.
Lathe.

Lathe.
NETWORK TOPOLOGY ALEGRIA GONZALEZ. WHAT IS A NETWORK TOPOLOGY?  a topology is a description of the of a network, including its  The physical topology.

NETWORK TOPOLOGY ALEGRIA GONZALEZ. WHAT IS A NETWORK TOPOLOGY?  a topology is a description of the of a network, including its  The physical topology.
Leica Lino Product Family Accurate, self-leveling point and line lasers Please insert a picture (Insert, Picture, from file). Size according to grey field.

Leica Lino Product Family Accurate, self-leveling point and line lasers Please insert a picture (Insert, Picture, from file). Size according to grey field.
Customer Presentation 2010 6805 West River Rd. South Elyria, OH 44035—Phone:440-323-3325---Fax:440-323-6833---

Customer Presentation West River Rd. South Elyria, OH 44035—Phone: Fax:
Www.OptomaUSA.com © 2008 Optoma Technology, Inc. All specifications subject to change. All rights reserved. Optoma Technologies / Detel Short Throw and.

© 2008 Optoma Technology, Inc. All specifications subject to change. All rights reserved. Optoma Technologies / Detel Short Throw and.
Weekly Advisor Meeting November 13, 2013.  Basic LED visual indicator circuit designed ◦ Red (>1.65V) ◦ Yellow (>2.25V, >2.35V) ◦ Green (>2.45V, >2.55V)

Weekly Advisor Meeting November 13,  Basic LED visual indicator circuit designed ◦ Red (>1.65V) ◦ Yellow (>2.25V, >2.35V) ◦ Green (>2.45V, >2.55V)
Unit 91 Week 13 Jon Gutierrez, Chris Sauer, Simon Radomski, Chat Huynh, Jeff Burton, & Robert Platt November 12, 2008 Prototype Review Week 2.

Unit 91 Week 13 Jon Gutierrez, Chris Sauer, Simon Radomski, Chat Huynh, Jeff Burton, & Robert Platt November 12, 2008 Prototype Review Week 2.
ZPDA /ZPD-KI high accuracy pump dosing system

ZPDA /ZPD-KI high accuracy pump dosing system
Group16: Assembly Fixture Design and Fabrication for 6 Pole Motor Magnets and their Retaining Parts Group Members: Jeffrey Morton John Pilgrim Marcus Rothberg.

Group16: Assembly Fixture Design and Fabrication for 6 Pole Motor Magnets and their Retaining Parts Group Members: Jeffrey Morton John Pilgrim Marcus Rothberg.

Similar presentations

Ads by Google