1. Making a Home Made Estes Rocket By Roberto & Stefano Barbier

2. 1 st gather a notecard

3. Wrap estes engine in notecard

4. Cut off excess notecard

6. Cover both sides of notecard with electrical tape to prevent burning.

8. Tape note card together when engine fits snuggly

9. Cut slightly shorter than engine

10. Gather popsicle sticks and cut in half

11. Glue popsicle halves with hot glue or any other adhesive

12. Put four each side

13. Continue adding popsicle sticks until engine casing fits tightly inside rocket tube

14. Hot glue engine housing in to rocket tube. Use other adhesive if necessary

15. Making the top of your rocket (Nose cone)

16. Using a compass, draw a large circle on construction paper

17. Cut circle in half

18. Role up until base is at desired size. Connect sides together with tape. Attach nose cone to top of rocket.

19. When finished, complete fins at bottom and decorate as wanted.