1. Microwelding & Hotstaking

2. Microwelding Lesson Objectives When you finish this lesson you will understand: The methods of making welds on micro-components using resistance welding Typical Applications Learning Activities 1.View Slides; 2.Read Notes, 3.Listen to lecture 4.Do on-line workbook Keywords Micro-welding, Hotstaking

3. Dawes, “Sealing Metal Microelectronic Packages, The Welding Institute Research Bulletin, Jan 1977

5. Dawes, “Sealing Metal Microelectronic Packages, The Welding Institute Research Bulletin, Jan 1977

6. Stockham “Resistance seam and laser welding of large hybrid metal packages”, Development in Microjoining 1970-1983, The Welding Institute

7. Resistance Seam Welder Stockham “Resistance seam and laser welding of large hybrid metal packages”, Development in Microjoining 1970-1983, The Welding Institute

8. Overlap Spot Seam Weld on Container Lid Stockham “Resistance seam and laser welding of large hybrid metal packages”, Development in Microjoining 1970-1983, The Welding Institute

9. Dawes, “Sealing Metal Microelectronic Packages, The Welding Institute Research Bulletin, Jan 1977

10. Dawes, “Sealing Metal Microelectronic Packages, The Welding Institute Research Bulletin, Jan 1977 Hatched Areas Indicate That an Atmosphere Can be Sealed in the Package While Welding

11. Electric Motor Hotstaking

12. Kinsky, “ An Investigation of the Commutator Hot-Staking Process. BS Thesis, General Motors Institute

13. Hot Staking GM Delco Process Spec P-837, 1980

14. Kinsky, “ An Investigation of the Commutator Hot-Staking Process. BS Thesis, General Motors Institute