1. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N Energy efficiency program changes not associated with the Post 2011 process Phone: 1 (877) 336-1839 Passcode: 2305557 Implementation Manual Updates: October 1, 2011

2. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 2 Agricultural Sector Presenter: Lita Mahan

3. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 3 Agricultural Sector Negative Changes – effective April 1, 2012  Agricultural Turbine Pump Applications Savings and reimbursement rates may change  Transformer De-energization (TRX) TRX will have a one-year measure life Reimbursement will be the lesser of $0.025 per kWh or 70 percent of the incremental project cost

4. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 4 Industrial Sector Presenter: Erin Hope

5. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 5 Industrial Sector Measure Clarifications :  Track and Tune Time periods for payments Customers’ ability to adjust the performance period – Based upon the timing of their agreement  High Performance Energy Management Management support is required Customers’ ability to adjust the performance period – Based upon the timing of their agreement

6. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 6 Industrial Sector Measure Clarifications (cont.) :  Alignment of Northwest Trade Ally Network (TAN) with custom project options Lighting projects may be submitted as custom projects if: – Do not meet Non-Residential Lighting requirements – Do not have interactive effects with other non-lighting measures – Provide more than 200,000 kWh in annual savings

7. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 7 Industrial Sector Negative Changes – effective April 1, 2012  Energy Project Manager Excess savings may not be carried over to subsequent funding years

8. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 8 Utility Sector Presenter: Steve Brooks

9. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 9 Utility Sector Measure Clarifications:  Custom Project Options The application of the following has been clarified in regard to custom project regulations – Utilization of equipment in stock is acceptable if installed after acceptance of custom project – Costs incurred during scoping study can be reimbursed even if they are accrued prior to the acceptance of the custom project

10. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 10 Utility Sector Negative Changes – effective April 1, 2012  The reimbursement rate for utility distribution custom projects with a 20+ year measure life will change to $0.25/kWh

11. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 11 Commercial Sector Presenter: Ray Hartwell

12. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 12 Commercial Sector Measure Clarifications:  New Construction, Major Renovation and Multifamily Higher than Three Stories M&V requirements have been clarified Project TypePredicted SavingsM&V Strategy New Construction > 200,000 kWh/yrIPMVP Option D: Calibrated Model simulation < 200,000 kWh/yrBPA Protocols: Energy Calculations with verification (ECwV) Major Renovation > 200,000 kWh/yrIPMVP Option D: Calibrated Model Simulation or BPA Protocols (Energy Modeling, Verification by Energy Use Indexing) < 200,000 kWh/yrBPA Protocols: (End Use Equipment, Verification by Energy Use Indexing, ECwV) New Equipment > 200,000 kWh/yrBPA Protocols: (Equipment in New Construction, End Use Equipment, Verification by Energy Use Indexing) < 200,000 kWh/yrBPA Protocols: (Equipment in New Construction, End Use Equipment, Verification by Energy Use Indexing, ECwV)

13. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 13 Commercial Sector Measure Clarifications (cont.):  Energy Smart Grocer This program has been revised to reflect the new budget structure This program will not be available until BPA finalizes its contract with PECI

14. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 14 Commercial Sector Changes – effective April 1, 2012  Commercial Ductless Heat Pumps This measure may be changed as part of an effort to expand applications Network Computer Power Management – This measure may be changed which may result in a decrease to savings Smart Power Strips – Expiration of this measure has been extended to April 1, 2012 – Measure update is possible pending RTF review

15. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 15 Commercial Sector Negative Changes – effective April 1, 2012  Deemed Refrigeration Retrofit There will be no reimbursement for night covers  Pre-rinse Spray Wash Valves Flow rate specification will be reduced to 0.65 gallons per minute or lower, savings will be reduced to 488 kWh  Energy Smart Design – Office and Tradeoffs Packages A and B no longer available for buildings with heat pump systems, Packages A and C will no longer available in the City of Seattle October 1, 2013, this measure will be removed

16. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 16 Residential Sector Presenter: Sarah F. Moore

17. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 17 Residential Sector Chapter Organization:  The residential measures have been condensed to eliminate redundancy of requirements The substance of these measures has not changed, but requirements may have been clarified or relocated

18. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 18 Residential Sector Measure clarification: Pipe Insulation  Requirements and Specifications Pipes must be wrapped with minimum of R-3 closed cell foam insulation at least 3 feet from the water heater Exposed plumbing runs of 15 feet or greater may claim the 15 foot measure  Reimbursement ApplicationkWh saved/yrReimbursement Short wrap (3 foot minimum)22$4.31 Long wrap (15 foot minimum)65$12.92

19. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 19 Residential Sector Specification updated: Montana House  Requirements and Specifications New, electrically-heated homes meeting the Montana House specification  Additional Documentation Requirements Builder information House and home inspection details  Reimbursement ApplicationReimbursement Shell Upgrade only$1,500.00 Air-Source Heat Pump$300.00 Duct Sealing (prescriptive)$300.00 Commissioning & Controls (utility verified)$200.00

20. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 20 Residential Sector Negative Changes – effective April 1, 2012  EISA Impacts to Standard CFLs Savings for standard CFLs will decrease from 24 kWh to 17 kWh BPA reimbursement will not decrease  Electric storage water heaters Heaters will be re-categorized by gallon size Savings for 105 and 119 gallon water heaters decreases 43% Reimbursement will be $25.00 for all measures, regardless of size

21. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 21 Residential Sector Negative Changes – effective April 1, 2012 (cont.)  PTCS Ground Source Heat Pump Upgrade of air-source heat pump to a ground source heat pump base case become ineligible for reimbursement The conversion of an electric forced air furnace to a ground source heat pump will be eligible  New ENERGY STAR Site-Built Homes (Oregon) Oregon ENERGY STAR Homes half or full basement and crawlspace measures will be retired and replaced with updated ENERGY STAR home measures  Reminder: Please review the April 2011 IM for negative changes taking effect October 1, 2011.

22. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 22 Multi Sector Presenter: Ray Hartwell

23. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 23 Multi Sector Negative Changes – effective April 1, 2012  Commercial and Industrial Lighting Deemed projects must use Lighting Calculator Spreadsheet versions 2.2 or 2.3 (Version 2.3 includes a cap on reimbursements at $0.50/kWh) Changes (possibly negative) will be implemented regarding – Lighting custom project eligibility criteria – Minimum project size – Measurement and verification requirements – Reimbursement

24. B O N N E V I L L E P O W E R A D M I N I S T R A T I O N 24 Multi Sector Multi Sector, Clarifications:  Measure Distribution Processes A new section has been added for Measure Distribution Processes Measures using these processes will reference this section for requirements  Commercial and Industrial Lighting The name has been changed to Non-Residential Lighting Qualifying custom projects have been clarified The custom project reimbursement rate is now $0.18/kWh capped at 70% of the project incremental cost