1. The Ohio Destination Imagination Training Director’s Overview of

2. Present a team-created story about the dangers faced by vehicles, told from the point of view of one or more vehicles Design and build small vehicles that are able to reliably and accurately travel specific distances Use at least three different power sources for the vehicles Use idea-creation and idea-directing tools to develop and choose options

3. Use of the engineering design process Exploration of physical concepts of motion and energy Use of mathematical concepts of geometry and measurement Understanding of customary and/ or metric measurements Considering mathematical concept of probability

4. Team Challenge A. Central Challenge (240 points) B. Team Choice Elements (60 points) C. Presentation Site D. Reward Points Rules of the Road Published Clarifications (online @ www.idodi.orgwww.idodi.org The information in these materials is binding for all teams

5. Roadmap Instant Challenge Practice Set (available online in the Resource Area at DestinationImagination.org) Travel Guide for Teams (available online after Jan. 1, 2013) www.facebook.com/destinationimagination www.twitter.com/idodi Training at www.diuniversity.org

6. Time Limit The team must complete the Presentation (including setup) in eight minutes or less. Team Budget The total value of the materials used may not exceed $175US. My 2012-13 Team Number is: 135- ___ ___ ___ ___ ___  My team is planning to compete in a sanctioned tournament.  I have registered for that tournament with the Regional Director

7. The Intent of the Challenge: To solve this Challenge, the team must design and build Vehicles that will travel to and stop in Scoring Zones, while attempting to avoid the Danger Zone. The team will try to score the highest possible number of Zone points while also choosing the level of Danger (risk and reward) it wishes to assume. The team will integrate the Vehicle travel into an original Story about dangers faced by vehicles, told from the point of view of one or more vehicles.

8. In addition, the team must present TWO creations called “Team Choice Elements” that show off their interests, skills, areas of strength, and talents. The team may create anything they wish for Team Choice Elements including props, music, technical gadgets, costumes, physical actions etc.

9. 1. Floor surface: Destination Imagination strongly suggests that the Presentation Site be a large space with a hard floor such as wood, linoleum, concrete or very short- napped carpet. Teams should be prepared to deal with a variety of floor surfaces. 2. Site Size: The minimum required overall size of the Presentation Site is 20ft deep x 20ft wide, but teams may use any additional space that Tournament Officials designate as available. The 20ft x 20ft site will not be taped. 3. A minimum ceiling height of 10ft is recommended for this Challenge at Regional and Affiliate tournaments. 4. Electrical Power: A single 3-sprong electrical outlet will be provided at the edge of each Presentation Site for the team’s use.

10. Learn all the Challenge elements teams are required to complete Learn about the elements of the Challenge under the team’s control See all the scoring elements and the maximum number of points you may receive from each

11. Destination Imagination Challenge B: Technical 2012 - 2013

12. Focus Creativity Critical Thinking Communication Collaboration Engineering Technical Design Strategic Planning Decision Making Logistics

13. Time Limit The team must complete the Presentation (including setup) in eight minutes or less.

14. Team Budget The total value of the materials used may not exceed $175US. The Rules of the Road will be helpful to you when determining the value of your Tournament Presentation

15. Team Number Teams and individuals using these Program Materials must hold a 20121 - 2013 Team Number. The Destination ImagiNation Team Number is a license to compete in sanctioned Tournaments and/or to use the Program Materials for educational purposes within your team, school, group or organization. Online access to Program Materials for teams who have purchased Team Numbers is on www.idodi.org My 2012-13 Team Number is: 1_ _3_ _5 - ___ ___ ___ ___ ___  My team is planning to compete in a sanctioned Tournament.  I will register for that Tournament with the Regional Director by the Region’s deadline

16. A. Central Challenge - Section 1 Intent of the Challenge: To solve this Challenge, the team must design and build Vehicles that will travel to and stop in Scoring Zones, while attempting to avoid the Danger Zone. The team will try to score the highest possible number of Zone points while also choosing the level of Danger (risk and reward) it wishes to assume. The team will integrate the Vehicle travel into an original Story about dangers faced by vehicles, told from the point of view of one or more vehicles.

17. A. Central Challenge – Section 2 2. Vehicles: The team will design and build small Vehicles that will travel from the Start Zone to other Zones on the Site. For the purpose of this Challenge, a Vehicle is a device that can be propelled over a distance. It must be a land Vehicle, traveling on the floor on its way to the scoring Zones. Minor unintentional bouncing or skipping will be allowed, but any Vehicle that is not designed with the intent of traveling on the floor will earn no points for D.1. a. The team will choose how many Vehicles it will use in the Presentation, with a minimum of three (3) Vehicles and a maximum of ten (10) Vehicles allowed. b. Any Vehicle may have the same design, Power Source[s] and construction as another Vehicle, or it may be different. c. Each Vehicle must have a unique and clearly marked number from 1 to 10. No Vehicle will be allowed to leave the Prep Area unless it has a number on it. Vehicle numbers may not be changed or switched between Vehicles after leaving the Prep Area.

18. A. Central Challenge – Section 2 d.Each Vehicle, at the time of measurement, must fit within a 6in x 6in x 6in cube or box. Any Vehicle that does not meet this size requirement will earn no points for D.1. i. Vehicles will be measured in the Prep Area prior to the team’s Presentation. At the discretion of the Appraisal Team, Vehicles may be measured a second time at the completion of the team’s Presentation. Any parts or decorations that have accidentally fallen off Vehicles will not be considered to be part of the Vehicle at the end of the Presentation. Vehicles that are designed or engineered to intentionally lose parts during their Zone travel will be treated as oversized vehicles. ii. No additional item(s) may be added to any Vehicle after it has been measured in the Prep Area. Replacement of defective or damaged parts is allowed only for Vehicles that have not yet traveled outside the Start Zone. Replacement parts must be similar to those parts being replaced. Vehicles may not be replaced in their entirety.

19. A. Central Challenge – Section 2 e.Each Vehicle will be propelled by a team-designed Propulsion System[s].Teams must use three or more different types of Power Sources from the following list to propel their Vehicles. Each Vehicle may use one or more than one Propulsion System. The team will select only three types of Power Sources to be considered for their Propulsion System score (D.2.a). i. Wind-up: Vehicle is propelled using energy stored through a tensioned or compressed mechanical system. ii. Pneumatic: Vehicle is propelled using energy from moving or stored gas or air. iii. Gravity: Vehicle is propelled by gravitational force. Vehicles may only be released (no outside forces added). Team members may not push Vehicles. iv. Electric Motor: Vehicle is propelled by a device that converts electrical energy to mechanical energy. vi.Hydraulic: Vehicle is propelled by liquid pressure and flow. vii.Thermal: Vehicle is propelled using temperature change to perform mechanical work. Please refer to the section on Safety in Rules of the Road for more on Team Challenge safety guidelines. viii.Magnetic: Vehicle is propelled by the attraction or repulsion of objects’ magnetic fields.

20. A. Central Challenge – Section 2 e.Teams will earn points for the Technical Innovation and Technical Design of each of the three selected Propulsion Systems. Teams will also earn points for the Technical Innovation and Technical Design of a team-selected Vehicle.

21. A. Central Challenge – Section 3 3. Zones: Solid lines shown in the Site figure will be taped. The dashed lines represent the minimum 20ft (6.1m) x 20ft (6.1m) Site size; dashed lines will not be taped. a. The boundaries of Zone 1 extend past the edges of the minimum 20ft (6.1m) x 20ft (6.1m) Site, if the Site provided is larger than the minimum size. Any Vehicle that comes to a stop outside the Start Zone and does not come to a stop in Zone 5, Zone 10 or the Danger Zone will be considered to be in Zone 1. b. A Vehicle must completely leave the Start Zone to receive Zone points. c. Zone points will be awarded in the following manner: i. If a Vehicle is stopped in Zone 1 at the end of the Presentation, the team will earn 1 point. ii. If a Vehicle is stopped in Zone 5 at the end of the Presentation, the team will earn 5 points. iii. If a Vehicle is stopped in Zone 10 at the end of the Presentation, the team will earn 10 points. iv. If a Vehicle is stopped completely in the Danger Zone, the team will earn no Zone points.

22. A. Central Challenge – Section 3 d. A Vehicle is considered to be in a Zone if any part of the Vehicle is in that Zone. The Vehicle does not need to be touching the ground to be considered in that Zone. Taped lines are considered to be part of the higher point Zone. e. Any Vehicle that stops between two Zones will receive the higher of the two Zone points except when the Vehicle stops between the Start Zone and Zone 1. In this instance, the Vehicle has not completely left the Start Zone and will not receive Zone points (See A.3.b). f. Team members are allowed to be in all Zones on the Site. Team members may not touch the Vehicle once the Vehicle is completely outside the boundaries of the Start Zone. If a Vehicle that is completely outside the Start Zone is touched, it will receive no Zone points (D.1). g. Vehicles that are bumped or moved by another Vehicle will receive the Zone points for their final location at the end of the Presentation. h. Appraisers will evaluate Vehicle locations following the Presentation. Team members must not pick up or move any Vehicles until Appraisers have completed their scoring.

23. A. Central Challenge – Section 4 4. Travel: Teams must release their Vehicles one at a time from any location within the Start Zone. Team members must not push or directly provide the propulsion needed for travel. All Vehicles must leave the Start Zone and travel using one or more Power Sources from the list provided in A.2.e. Vehicles that do not meet the travel requirements outlined here will earn no Zone points (D.1). a.Team members may release their Vehicles in any order. b.Vehicles must begin their travel from completely within the Start Zone. c.Teams must not release any Vehicle until the previously released Vehicle is entirely out of the Start Zone. Vehicles released when a previously released Vehicle is still in the Start Zone will earn no Zone points. d.Vehicles cannot be attached to each other in any manner as they leave the Start Zone. e.External guidance that is entirely contained within the Start Zone is allowed. f. Vehicles must travel freely after leaving the Start Zone. No tracks, tunnels or other means that direct the Vehicles may be used outside the Start Zone. Anything needed to propel or direct the Vehicles must remain in the Start Zone or be on the Vehicles. TEAMS MAY NOT USE TEAM-CONTROLLED EXTERNAL DEVICES SUCH AS ELECTRONIC OR MECHANICAL REMOTE CONTROLS TO DIRECT THE MOTION OF THE VEHICLES. g.Traveling Vehicles are allowed to touch other Vehicles that have been released for score. Teams are not permitted to use barriers, walls, props or other items on the Site, intentionally or unintentionally, to physically assist the stopping or directing of any Vehicle. A Vehicle will earn no Zone points (D.1) if it touches anything other than another Vehicle and the tournament-provided floor during its travel.

24. A. Central Challenge – Section 4 h.Teams will earn points for the Technical Design and Innovation of the methods used by the Vehicles to travel accurately and to stop by themselves.

25. A. Central Challenge – Section 5 e. Danger Points: This Challenge includes a Danger Points decision that will require strategic planning and quick thinking for teams to be successful. While in the Launch Area, teams will randomly draw the number of one of their Vehicles. All teams will have one minute to make their Danger Points decision after the number is drawn. The team’s decision will be based on the following information: a.The team may choose not to accept any level of Danger. In this case, no Danger Points will be added or deducted. b.The team may choose to accept the Danger. Points will be awarded in the following manner: i.If the randomly selected Vehicle is stopped in Zone 1 at the end of the Presentation, the team will earn 10 extra Danger Points. ii.If the randomly selected Vehicle is stopped in Zone 5 at the end of the Presentation, the team will earn 25 extra Danger Points. iii.If the randomly selected Vehicle is stopped in Zone 10 at the end of the Presentation, the team will earn 50 extra Danger Points. c.The team will lose 25 Danger Points if the randomly selected Vehicle does any one of the following: i. Is stopped completely in the Danger Zone at the end of the Presentation. ii. Touches any team members or objects except for other Vehicles as it travels. iii. Is released prior to the previously-released Vehicle completely leaving the Start Zone.

26. A. Central Challenge – Section 6 f. Story: Imagine you are a vehicle. Crowded highways, inattentive drivers, road construction or heavy loads can mean daily danger as you go about your business. Split-second decisions can result in either a safe trip to your destination or they can result in accidents or detours. a.The team will earn points for the creativity and originality of a team-created Story about a dangerous situation told from the point of view of one or more vehicles that are involved in it. b.The team will earn points for integrating the team’s Vehicle travel into the Story. c.The team will earn points for the theatrical effect of the characterization of a vehicle[s] by one or more team members. This characterization may involve appearance, mannerisms, dialogue or other methods as chosen by the team.

27. B. Team Choice Elements B.In addition to the above requirements, the team must present TWO creations called “Team Choice Elements” that show off their interests, skills, areas of strength, and talents. The team may create anything they wish for Team Choice Elements including props, music, technical gadgets, costumes, physical actions etc. 1. The team must present both Team Choice Elements as part of the eight-minute Presentation and each Team Choice Element should have a meaningful connection to the team’s Central Challenge solution. Each Team Choice Element must be described briefly on the Tournament Data Form found at the end of this Challenge.

28. B. Team Choice Elements 2. A Team Choice Element may not be a specific item that is required in the Central Challenge that is already being evaluated. A Team Choice Element MAY be a single unique PART of a required item, as long as it can be evaluated as a stand-alone item. Both Team Choice Elements may be presented at the same time ONLY IF both can be easily identified and scored separately. Examples of these can be found in Rules of the Road. 3. Each Team Choice Element will be evaluated in three ways : for the Creativity and Originality of the Team Choice Element, and for the Quality, Workmanship, or Effort that is evident and Integration into the Presentation. Evaluation of Team Choice Elements is subjective.

29. D. Presentation Site – Section 1. Floor surface: Destination ImagiNation strongly suggests that the Presentation Site be a large space with a hard floor such as wood, linoleum, concrete or very short-napped carpet. Teams should be prepared to deal with a variety of floor surfaces. Teams may contact the Tournament Director for more information about the Site. 2. Site Size: The minimum required overall size of the Presentation Site is 20 ft deep x 20 ft wide, but teams may use any additional space that Tournament Officials designate as available. The 20ft x 20ft site will not be taped. A minimum ceiling height of 10ft (3.05m) is recommended for this Challenge at Regional and Affiliate tournaments. 3. Electrical Power: A 3-prong electrical outlet will be provided at the edge of each Presentation Site for the team’s use.

31. E. Reward Points – Scoring Category 1 Zones Scaled to 120 points –a. Zone points for each Vehicle (up to 10 Vehicles) 0, 1, 5, or 10 points from A.3.c –b. Danger Points for one randomly-selected Vehicle -25, 0, 10, 25, or points from A.5.b and c

32. E. Reward Points – Scoring Category 2 Vehicles up to 50 points a.Technical Innovation and Technical Design of Three Propulsion Systems i.Propulsion System 1 Up to 10 points from A.2.f ii.Propulsion System 2 Up to 10 points from A.2.f iii.Propulsion System 3 Up to 10 points from A.2.f b.Technical Innovation and Technical Design of a team-selected Vehicle Up to 20 points from A.2.f

33. E. Reward Points – Scoring Category 3 Travel up to 25 points Technical Design and Innovation of the methods used by the Vehicles to travel accurately and to stop by themselves Up to 25 points from A.4.h

34. E. Reward Points – Scoring Category 4 Story up to 45 points a.Creativity and originality of team-created Story Up to 25 points from A.6.a b.Integrating the team’s Vehicle travel into the Story Up to 10 points from A.6.b c.Theatrical effect of the characterization of the Vehicle(s) Up to 10 points from A.6.c

35. E. Reward Points – Team Choice Elements Team Choice Element 1 up to 30 points from B a. Creativity and Originality up to 10 points from B.3 b. Quality, Workmanship, or Effort that is Evident Up to 10 points from B.3 c. Integration into the Presentation Up to 10 from B.3 Team Choice Element 2 up to 30 points from B a. Creativity and Originality up to 10 points from B.3 b. Quality, Workmanship, or Effort that is Evident Up to 10 points from B.3 c. Integration into the Presentation Up to 10 from B.3

36. E. Reward Points – Team Challenge Scoring Central Challenge Scoring at a Glance Instant Challenge = 25% Team Choice Elements 60 points = 15% Central Challenge 240 points = 60% –Vehicle Travel, Design, & Innovation = 19% of the 240 Central Challenge points –The Story = 19% of the 240 Central Challenge points –Vehicle Propulsion System = 12% of the 240 Central Challenge points –Final Vehicle Locations = 50% of the 240 Central Challenge

37. F. Tournament Data Form – Part 1 Part One: Required Paperwork At the Tournament Presentation Site, the Prep Area Appraiser will ask for your team’s forms. A complete checklist of the required forms is below. Your team needs: Five copies of this completed two-page Tournament Data Form. Two Copies of the completed Declaration of Independence. Blank copies of this form can be found in the Rules of the Road. One copy of this form is for Team Challenge, the other copy of is for you to take to Instant Challenge. One Copy of the completed Expense Report. This form can be found in the Rules of the Road. Be sure to bring copies of your receipts in case you are asked for them, but it is not necessary to attach them to the form. Published Clarifications: We have read and are aware of the Published Clarifications on www.IDODI.org. Team Identification Sign: This will tell the appraisers and the audience who you are. The team should provide a free-standing Identification sign (ID Sign) of approximately 2ft. X 3ft displaying your Team Name, Team Number, School/Organization(if different from Team Name), and Level.

38. F. Tournament Data Form – Part 2 Part Two: Team Choice Element 1  What is your Team Choice Element? _________________________________________  Please write a brief description of your Team Choice Element. Make sure that Appraisers know exactly what you want them to evaluate. What would you like them to know about the Team Choice Element? _______________________________________ Team Choice Element 2  What is your Team Choice Element? _________________________________________  Please write a brief description of your Team Choice Element. Make sure that Appraisers know exactly what you want them to evaluate. What would you like them to know about the Team Choice Element? _______________________________________

39. F. Tournament Data Form – Part 3 Part Three: Presentation Elements This Challenge Requires the team to supply the following information to help the Appraisers evaluate your solution. This is PAGE TWO of the form. Be sure to fill in both pages. 1.Describe the three Propulsion Systems to be scored for your team’s Vehicles. a.First System ___________________ Which Vehicles use System #1_______________ b.Second System __________________ Which Vehicles use System #2______________ c.Third System _____________________ Which Vehicles use System #3_____________ 2.Explain methods your team is using to have your Vehicles accurately travel and to stop in higher Zone points ______________________ 3.Which Vehicle has your team selected to be scored for Technical Design and Innovation? _____ 4.Why have you chosen this particular Vehicle? 5.Briefly describe your Story and how your team integrates the Vehicle travel into the plot ______________ 6.Describe the methods your team has chosen to have one or more team members characterize vehicle(s) _________________

40. Thanks for Attending this Training Have a safe trip back home!